| Literature DB >> 28127567 |
Valentina Bernasconi1, Karin Norling2, Marta Bally2, Fredrik Höök2, Nils Y Lycke1.
Abstract
Immune protection against infectious diseases is most effective if located at the portal of entry of the pathogen. Hence, there is an increasing demand for vaccine formulations that can induce strong protective immunity following oral, respiratory, or genital tract administration. At present, only few mucosal vaccines are found on the market, but recent technological advancements and a better understanding of the principles that govern priming of mucosal immune responses have contributed to a more optimistic view on the future of mucosal vaccines. Compared to live attenuated vaccines, subcomponent vaccines, most often protein-based, are considered safer, more stable, and less complicated to manufacture, but they require the addition of nontoxic and clinically safe adjuvants to be effective. In addition, another limiting factor is the large antigen dose that usually is required for mucosal vaccines. Therefore, the combination of mucosal adjuvants with the recent progress in nanoparticle technology provides an attractive solution to these problems. In particular, the liposome technology is ideal for combining protein antigen and adjuvant into an effective mucosal vaccine. Here, we describe and discuss recent progress in nanoparticle formulations using various types of liposomes that convey strong promise for the successful development of the next generation of mucosal vaccines.Entities:
Mesh:
Substances:
Year: 2016 PMID: 28127567 PMCID: PMC5227169 DOI: 10.1155/2016/5482087
Source DB: PubMed Journal: J Immunol Res ISSN: 2314-7156 Impact factor: 4.818
Figure 1Principles for induction of mucosal immune responses after intranasal vaccination. The respiratory mucosal immune system consists of clusters of lymphoid cells beneath the mucosal epithelium, hosting both innate and adaptive immune cells [29]. There is a clear distinction between inductive and effector sites and these are also physically separated. Inductive sites are organized lymphoid tissues where antigen is taken up by DCs and other APCs. The effector sites, on the other hand, are tissues that provide protection against infection where specific antibodies and CD4+ and CD8+ effector and memory T cells reside [30]. The main inductive sites for mucosal immune responses after intranasal vaccination are known as nasopharynx-associated lymphoid tissue (NALT), which harbors B cell follicles and T cell zones in well demarked microanatomical areas [31]. Antigens are taken up by DCs that get access to the luminal content either through direct uptake through the epithelium or via the follicle associated epithelium (FAE) that overlay the NALT. After antigen uptake, the immature DCs undergo maturation and subsequently leave the mucosal tissue for the draining lymph nodes, alternatively, if already in the NALT, the DCs will directly prime naive CD4+ or CD8+ T cells. Activated CD4+ T cells differentiate into various subsets: T helper 1 (Th1), Th2, or Th17 cells, regulatory T cells (Tregs), or follicular helper T cells (TFH). The latter are critically needed for the expansion and differentiation of the activated B cells in the germinal center (GC), which is formed in the B cell follicle in the lymph node after vaccination. TFH cells are involved in the development of long-lived plasma cells and memory B cells in the GC.
Examples of liposome adjuvant vaccines against infectious diseases tested in clinical trials. This compilation of completed or ongoing studies involving liposomes for vaccination of humans was generated with data from ClinicalTrials.gov. Here we have indicated the target disease, the vaccine composition, the route of administration, the clinical testing stage, and the reference number.
| Name | Disease | Description | Route of administration | Sponsor | Status | ClinicalTrials.gov Identifier |
|---|---|---|---|---|---|---|
| FMP012 with AS01B | Malaria | Falciparum malaria protein (FMP012) in a formulation based on liposomes mixed with the immunostimulants monophosphoryl lipid (MPL) and | Intramuscular injection | US Army Medical Research and GlaxoSmithKline | Phase 1 | |
|
| ||||||
| TVDV with Vaxfectin [ | Dengue fever | Tetravalent dengue vaccine (TVDV) with Vaxfectin® cationic lipid-based adjuvant | Intramuscular injection | US Army Medical Research and Materiel Command | Phase 1 | |
|
| ||||||
| Ag85B-ESAT-6 with CAF01 [ | Tuberculosis | Subunit protein antigen Ag85B-ESAT-6 with two-component liposomal adjuvant system composed of a cationic liposome vehicle (dimethyldioctadecylammonium (DDA) stabilized with a glycolipid immunomodulator (trehalose 6,6-dibehenate (TDB)) | Intramuscular injection | Statens Serum Institut | Phase 1 | |
|
| ||||||
| Biocine with lipid A [ | HIV | Recombinant envelope protein rgp120/HIV-1SF2 combined with lipid A | Intradermal | National Institute of Allergy and Infectious Diseases | Phase 1 | |
|
| ||||||
| PAMVAC with GLA-SE or GLA-LSQ | Malaria | Placental malaria vaccine candidate adjuvant with alhydrogel, glucopyranosyl lipid adjuvant-stable emulsion (GLA-SE), or glucopyranosyl lipid adjuvant-liposome-QS-21 formulation (GLA-LSQ) | Intramuscular injection | Tuebingen University Hospital | Phase 1 | |
|
| ||||||
| ID93 with GLA-SE [ | Tuberculosis | Recombinant fusion protein incorporating four | Intramuscular injection | National Institute of Allergy and Infectious Diseases | Phase 1 | |
|
| ||||||
| Novel liposomal based intranasal influenza vaccine | Influenza | Liposomal-based influenza vaccine | Intranasal | Hadassah Medical Organization | Phase 2 | |
|
| ||||||
| VaxiSome with CCS/C [ | Influenza | Commercial split influenza virus and polycationic liposome as adjuvant (CCS/C) | Intramuscular injection | NasVax Ltd. | Phase 2 | |
|
| ||||||
| Fluzone with JVRS-100 [ | Influenza | Inactivated trivalent influenza virus vaccine administered with cationic lipid-DNA complex adjuvant JVRS-100 | Intradermal | Colby Pharmaceutical Company and Juvaris | Phase 2 | |
|
| ||||||
| RTS/S with AS01 [ | Malaria | Repeat sequences of the | Intramuscular injection | KEMRI-Wellcome Trust Collaborative Research Program and GlaxoSmithKline | Phase 3 |
|
|
| ||||||
| Amphomul [ | Visceral leishmaniasis | Amphotericin B lipid emulsion | Intramuscular injection | Bharat Serums and Vaccines Limited | Phase 3 | |
Figure 2Generation of customized liposomes. Lipids are polar molecules consisting of a hydrophilic headgroup and hydrophobic fatty acid tails. Examples of positively charged headgroups are trimethylammonium propane (TAP) and dioctadecyl ammonium bromide (DA), while negatively charged headgroups are phosphatidylserine (PS), phosphatidylinositol (PI), phosphatidylglycerol (PG), or phosphatidic acid (PA), and finally neutral headgroups are phosphatidylcholine (PC) or phosphatidylethanolamine (PE). A headgroup can be combined with tails of different nature to create lipids with the desired properties; the examples shown are the lipid 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and the phospholipids dimyristoylphosphatidylglycerol (DMPG) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC). Different lipids can then be combined into liposomes with different functional features, which provide the basis for this highly diverse and versatile technology that is so excellently suited for vaccine development.
Figure 3Various properties of liposome-based vaccines. (a) The effect of altered surface charge on liposome function has been extensively examined [32, 33]. (b) The lipid composition is critically influencing the immune response [34]. (c) Also the localization of the antigen on or inside the liposome plays an important role in shaping the immune response to the vaccine. There are several modes of antigen association to liposomes. Firstly, antigens may be encapsulated in the aqueous core or they could be linked to the surface via covalent attachment. Alternatively, a hydrophobic anchor can be used to attach the antigen to the surface via adsorption or through electrostatic interactions with lipids of opposite charge. For proteins with a hydrophobic region one may even successfully insert these in the liposome membrane. The liposome may also be used as an immunoenhancer simply by admixing the antigen and the liposomes. (d) Only few studies have addressed the impact of size or lamellarity [35, 36]. (e) Modifications of liposomes to increase their immunoenhancing effect can be done through attaching PAMPs, such as lipid A (LPS), or through specific targeting strategies using cell-specific antibodies (anti-CD103 or -DEC205) [16, 37]. (f) Other modifications, including addition of poly(ethylene glycol) (PEG) or different polymer coatings that increase the liposome penetration of the mucosal barrier or to increase liposome resistance in biological fluids, have also been developed [38].