Literature DB >> 28110576

Preclinical evaluation of an MR-compatible microwave ablation system and comparison with a standard microwave ablation system in an ex vivo bovine liver model.

Rüdiger Hoffmann1, David-Emanuel Kessler1, Jakob Weiss1, Stephan Clasen1, Philippe L Pereira2, Konstantin Nikolaou1, Hansjörg Rempp1.   

Abstract

OBJECTIVE: Evaluation of a newly developed MR-compatible microwave ablation system with focus on ablation performance and comparison with a corresponding standard microwave ablation system.
MATERIALS AND METHODS: A total of 52 ablations were performed with a non-cooled microwave ablation system in an ex vivo bovine liver model using the following settings: [A] 16G-standard antenna, 2 cm active tip, 2.4 m cable; [B] MR-compatible 16G-antenna, 2 cm active tip, 2.4 m cable; [C] MR-compatible 16G-antenna, 2 cm active tip, extended 6 m cable; and [D] MR-compatible 16G-antenna, 4 cm active tip, extended 6 m cable. Ablation durations were 3, 5 and 10 min, and additionally 15 min for [D]. Ablations zones were measured for short-axis diameter (SA) and long-axis diameter (LA). Settings [A]-[C] were compared regarding SA, volume (V) and generator energy output (E) with analysis of variance and Tukey-Kramer post hoc test. Ablation performance of the MR-compatible settings [C] and [D] were compared regarding SA, V, E and sphericity index (SA/LA) with unpaired t-test. p < 0.05 was considered as statistically significant.
RESULTS: No significant differences were found between [A], [B] and [C] regarding SA and V (10 min; SA[A] = 25.8 ± 2.4 mm, SA[B] = 25.3 ± 1.9 mm, SA[C] = 25.0 ± 2.0 mm, p = 0.88; V[A] = 17.8 ± 4.4 cm³, V[B] = 16.6 ± 3.0 cm³, V[C] = 17.8 ± 2.7 cm³, p = 0.85); however, the highest energy output was measured for setting [C] (10 min; [A]: 9.9 ± 0.5 kJ, [B]: 10.1 ± 0.5 kJ, [C]: 13.1 ± 0.3 kJ, p < 0.001). SA, V and E were significantly larger with setting [D] than [C] with 10 min ablations (SA[C] = 25.0 ± 2.0 mm, SA[D] = 34.0 ± 2.9 mm, p = 0.003; V[C] = 17.8 ± 2.7 cm³, V[D] = 39.4 ± 7.5 cm³, p = 0.007; E[C] = 13.1 ± 0.3 kJ, E[D] = 16.7 ± 0.8 kJ, p = 0.002) without significant difference in sphericity index (SA/LA[C] = 0.46 ± 0.02, SA/LA[D] = 0.52 ± 0.04, p = 0.08).
CONCLUSION: The tested MR-compatible system can be used without loss of ablation performance compared to the standard system.

Entities:  

Keywords:  MR-guided intervention; Microwave ablation; minimally invasive tumour therapy; percutaneous tumour ablation; tumour ablation

Mesh:

Year:  2017        PMID: 28110576     DOI: 10.1080/02656736.2017.1284349

Source DB:  PubMed          Journal:  Int J Hyperthermia        ISSN: 0265-6736            Impact factor:   3.914


  3 in total

1.  Experimental assessment of microwave ablation computational modeling with MR thermometry.

Authors:  Pegah Faridi; Paul Keselman; Hojjatollah Fallahi; Punit Prakash
Journal:  Med Phys       Date:  2020-07-16       Impact factor: 4.071

2.  2450-MHz microwave ablation of liver metastases under 3.0 T wide-bore magnetic resonance guidance: a pilot study.

Authors:  Kaihao Xu; Zhaonan Li; Yiming Liu; Zaoqu Liu; Chaoyan Wang; Dechao Jiao; Xinwei Han
Journal:  Sci Rep       Date:  2022-07-25       Impact factor: 4.996

3.  Artefact and ablation performance of an MR-conditional high-power microwave system in bovine livers: an ex vivo study.

Authors:  Antonia Grimm; Moritz Winkelmann; Jakob Weiß; Georg Gohla; Gunnar Blumenstock; Konstantin Nikolaou; Stephan Clasen; Rüdiger Hoffmann
Journal:  Eur Radiol Exp       Date:  2019-09-23
  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.