INTRODUCTION AND HYPOTHESIS: We compared the clinician's ability to cut episiotomies at the recommended 60° angle with traditional straight Mayo scissors compared with patented fixed-angle episiotomy scissors EPISCISSORS-60® in a simulated setting using mounted incision pads. The hypothesis was that fixed-angle episiotomies would achieve a more accurate cutting angle of 60°. METHODS: Angles were cut on episiotomy incision pads in a mounted birth model simulating crowning: 110 midwives and doctors cut an 60° episiotomy with Mayo scissors and then EPISCISSORS-60. Angles were measured with protractors. Average angles were calculated and the one-tailed paired t test was used to compare groups. RESULTS: Mean angle was 45° with Mayo scissors [SD = 9, 95% confidence interval (CI) = 43.3-46.7, interquartile range (IQR) 38-50] and 60° with the EPISCISSORS-60 (SD = 3, 95% CI = 59.3-60.7, IQR = 58-60). Two-thirds of cuts with Mayo scissors were below 50°. CONCLUSIONS: In a simulated setting the majority of operators are unable to cut an episiotomy at the recommended 60° angle with Mayo scissors. The EPISCISSORS-60 cut an episiotomy a statistically significant 15° wider than regular Mayo scissors and achieved the recommended 60° in the vast majority of cases. If these findings translate into real life situations, then cutting episiotomies at 60° is expected to make a valuable contribution in reducing third- and fourth-degree tears in both spontaneous and operative vaginal deliveries. Variability in mediolateral episiotomies should be reduced by use of fixed-angle scissors or through validated health professional training programmes to improve visual accuracy.
INTRODUCTION AND HYPOTHESIS: We compared the clinician's ability to cut episiotomies at the recommended 60° angle with traditional straight Mayo scissors compared with patented fixed-angle episiotomy scissors EPISCISSORS-60® in a simulated setting using mounted incision pads. The hypothesis was that fixed-angle episiotomies would achieve a more accurate cutting angle of 60°. METHODS: Angles were cut on episiotomy incision pads in a mounted birth model simulating crowning: 110 midwives and doctors cut an 60° episiotomy with Mayo scissors and then EPISCISSORS-60. Angles were measured with protractors. Average angles were calculated and the one-tailed paired t test was used to compare groups. RESULTS: Mean angle was 45° with Mayo scissors [SD = 9, 95% confidence interval (CI) = 43.3-46.7, interquartile range (IQR) 38-50] and 60° with the EPISCISSORS-60 (SD = 3, 95% CI = 59.3-60.7, IQR = 58-60). Two-thirds of cuts with Mayo scissors were below 50°. CONCLUSIONS: In a simulated setting the majority of operators are unable to cut an episiotomy at the recommended 60° angle with Mayo scissors. The EPISCISSORS-60 cut an episiotomy a statistically significant 15° wider than regular Mayo scissors and achieved the recommended 60° in the vast majority of cases. If these findings translate into real life situations, then cutting episiotomies at 60° is expected to make a valuable contribution in reducing third- and fourth-degree tears in both spontaneous and operative vaginal deliveries. Variability in mediolateral episiotomies should be reduced by use of fixed-angle scissors or through validated health professional training programmes to improve visual accuracy.
Authors: Madhu Naidu; Dharmesh S Kapoor; Sarah Evans; Latha Vinayakarao; Ranee Thakar; Abdul H Sultan Journal: Int Urogynecol J Date: 2015-02-06 Impact factor: 2.894
Authors: M R B Keighley; Yvette Perston; Elissa Bradshaw; Joanne Hayes; D Margaret Keighley; Sara Webb Journal: BMC Pregnancy Childbirth Date: 2016-09-21 Impact factor: 3.007