| Literature DB >> 27836595 |
H Al-Sagur1, S Komathi1, M A Khan2, A G Gurek3, A Hassan4.
Abstract
Herein, we report a scalable synthesis of multifunctional conducting polyacrylic acid (PAA) hydrogel (MFH) integrated with reduced grapheme oxide (rGO), vinyl substituted polyaniline (VS-PANI) and lutetium Phthalocyanine (LuPc2) as three dimensional robust matrix for glucose oxidase (GOx) immobilization (PAA-rGO/VS-PANI/LuPc2/GOx-MFH). We have integrated the multicomponents such as PAA with rGO, and VS-PANI through free radical polymerization using methylene bis-acrylamide, and ammonium persulphate as the cross linker and initiator. The LuPc2 was then doped to form multifunctional hydrogel (PAA-rGO/VS-PANI/LuPc2-MFH). Finally, biosensor was fabricated by immobilizing GOx into PAA-rGO/VS-PANI/LuPc2-MFH and subsequently used for electrochemical detection of glucose. The PAA-rGO/VS-PANI/LuPc2/GOx-MFH biosensor exhibited high sensitivity (15.31μAmM-1cm-2) for the detection of glucose over a concentration range of 2-12mM with a low detection limit of 25µm. The PAA-rGO/VS-PANI/LuPc2-MFH biosensor showed a fast response time (1s) to the addition of glucose with high storage stability of 3 months. The real sample analysis reveals that PAA-rGO/VS-PANI/LuPc2/GOx-MFH could be effectively used as an electrochemical biosensor in industrial as well clinical diagnosis.Entities:
Keywords: Glucose biosensor; Lutetium phthalocyanine; Multifunctional hydrogel; Polyacrylic acid; Polyaniline; Reduced graphene oxide
Mesh:
Substances:
Year: 2016 PMID: 27836595 DOI: 10.1016/j.bios.2016.10.038
Source DB: PubMed Journal: Biosens Bioelectron ISSN: 0956-5663 Impact factor: 10.618