Literature DB >> 27679981

Short-Term Prospective Clinical Evaluation of Monolithic and Partially Veneered Zirconia Single Crowns.

Wolfgang Bömicke1, Peter Rammelsberg2, Thomas Stober2, Marc Schmitter3.   

Abstract

OBJECTIVES: The purpose of this study was to prospectively evaluate the short-term clinical performance and esthetics of monolithic and partially (i.e., facially) veneered zirconia single crowns (MZC and PZC, respectively).
METHODS: Between September 2011 and June 2013, 68 participants received 90 MZCs and 72 PZCs. Clinical study documentation was performed at crown cementation (baseline), at the 6-month follow-up, and then yearly thereafter using standardized report forms. Eight participants with 14 single crowns (eight MZCs and six PZCs) dropped out during clinical follow-up. Thus, 60 participants (28 male, mean age 62.5 ± 13.1 years) fitted with 82 MZCs and 66 PZCs were analyzed in February 2016 (Kaplan-Meier survival; mean observation time for the restorations 35.1 ± 6.3 months). Descriptive statistics were calculated for participants' and dentists' esthetic ratings on a numerical rating scale from 0 to 10 (0 = unacceptable color and shape; 10 = excellent color and shape).
RESULTS: Complications were predominantly biological in nature. One PZC was affected by minor chipping. Cumulative 3-year failure-free survival was 98.5% (standard error (SE), 1.5%) for both MZCs and PZCs. Three-year cumulative complication-free survival (success) was 93.6% (SE 2.8%) for MZCs and 95.5% (SE 2.6%) for PZCs. Three-year cumulative fracture-free survival was 100% for MZCs and 98.5% (SE 1.5%) for PZCs. Crowns of both types were awarded high esthetic scores by participants and dentists.
CONCLUSIONS: Monolithic and partially veneered zirconia crowns can be used clinically with excellent short-term survival and success and without compromising esthetic appearance. Longer-term follow-up is, however, desirable. CLINICAL SIGNIFICANCE: During the observation time, both monolithic and partially veneered zirconia crowns showed an outstanding low technical complication rate: only one minor chipping and three losses of retention were observed. Additionally, esthetics was excellent. Based on these results the clinical use of this kind of restoration is promising. (J Esthet Restor Dent 29:22-30, 2017).
© 2016 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2016        PMID: 27679981     DOI: 10.1111/jerd.12270

Source DB:  PubMed          Journal:  J Esthet Restor Dent        ISSN: 1496-4155            Impact factor:   2.843


  13 in total

1.  Tooth substance removal for ceramic single crown materials-an in vitro comparison.

Authors:  Franz Sebastian Schwindling; Moritz Waldecker; Peter Rammelsberg; Stefan Rues; Wolfgang Bömicke
Journal:  Clin Oral Investig       Date:  2018-12-04       Impact factor: 3.573

2.  Wear Behavior of Graded Glass/Zirconia Crowns and Their Antagonists.

Authors:  M R Kaizer; S Bano; M Borba; V Garg; M B F Dos Santos; Y Zhang
Journal:  J Dent Res       Date:  2019-02-11       Impact factor: 6.116

3.  Speed sintering translucent zirconia for chairside one-visit dental restorations: Optical, mechanical, and wear characteristics.

Authors:  Marina R Kaizer; Petra C Gierthmuehlen; Mateus Bf Dos Santos; Sergio S Cava; Yu Zhang
Journal:  Ceram Int       Date:  2017-05-19       Impact factor: 4.527

4.  The progressive wear and abrasiveness of novel graded glass/zirconia materials relative to their dental ceramic counterparts.

Authors:  Marina R Kaizer; Rafael R Moraes; Sergio S Cava; Yu Zhang
Journal:  Dent Mater       Date:  2019-03-01       Impact factor: 5.304

Review 5.  Evaluating dental zirconia.

Authors:  Yu Zhang; Brian R Lawn
Journal:  Dent Mater       Date:  2018-08-29       Impact factor: 5.304

Review 6.  Do tooth-supported zirconia restorations present more technical failures related to fracture or loss of retention? Systematic review and meta-analysis.

Authors:  Carla Castiglia Gonzaga; Paula Pontes Garcia; Letícia Maíra Wambier; Fernanda Harumi Oku Prochnow; Luciano Madeira; Paulo Francisco Cesar
Journal:  Clin Oral Investig       Date:  2022-06-04       Impact factor: 3.606

7.  Effect of different semimonolithic designs on fracture resistance and fracture mode of translucent and high-translucent zirconia crowns.

Authors:  Fahad Bakitian; Przemek Seweryniak; Evaggelia Papia; Christel Larsson; Per Vult von Steyern
Journal:  Clin Cosmet Investig Dent       Date:  2018-03-28

8.  Clinical Outcomes of Monolithic Zirconia Crowns with CAD/CAM Technology. A 1-Year Follow-Up Prospective Clinical Study of 65 Patients.

Authors:  Ioannis Konstantinidis; Dimitra Trikka; Spyridon Gasparatos; Miltiadis E Mitsias
Journal:  Int J Environ Res Public Health       Date:  2018-11-12       Impact factor: 3.390

Review 9.  Monolithic Zirconia: An Update to Current Knowledge. Optical Properties, Wear, and Clinical Performance.

Authors:  Eleana Kontonasaki; Athanasios E Rigos; Charithea Ilia; Thomas Istantsos
Journal:  Dent J (Basel)       Date:  2019-09-02

10.  Fracture strength of veneered translucent zirconium dioxide crowns with different porcelain thicknesses.

Authors:  Fahad Bakitian; Przemek Seweryniak; Evaggelia Papia; Christel Larsson; Per Vult von Steyern
Journal:  Acta Biomater Odontol Scand       Date:  2017-11-14
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.