Literature DB >> 27627718

An Alternative Intraoperative Radiographic Method for Optimizing Cup Inclination during Total Hip Arthroplasty.

Gang-Yong Huang1, Guang-Lei Zhao1, Jun Xia2, Yi-Bing Wei1, Si-Qun Wang1, Jian-Guo Wu1.   

Abstract

OBJECTIVE: During total hip arthroplasty (THA), the location of the acetabular prosthesis is very important for guaranteeing successful surgery. However, this remains a challenge for many surgeons. This study aimed to investigate the feasibility of using the intraoperative fluoroscopic iliopubic tangential angle (IPTA) to determine the valgus angles of acetabular prostheses.
METHODS: In the first stage, the IPTA and valgus angles of native acetabula were defined and measured in 102 THAs obtained from the picture archiving and communication systems of our hospital. Obturator foramen morphology was also measured and divided into groups according to the axial length ratio. Correlations between obturator foramen morphology and IPTA and valgus angles of native acetabula were then determined. In the second stage, angular differences (angle θ) between the IPTA and valgus angles of native acetabula were measured during unilateral THA in 136 patients to determine whether this is a stable value that could be used as a reference for placement of acetabular prostheses. Postoperative data such as Harris Hip Score (HHS) scores and complications were collected and evaluated.
RESULTS: The average IPTA at the apex of the true acetabulum was 58.8° ± 4.1°. The average valgus angle of native acetabula was 43.1° ± 3.9° and angle θ was 15.7° ± 1.3°. Obturator foramen morphology was divided into five groups according to the axial length ratio. IPTA was closely related to obturator foramen morphology (Pearson r = 0.489, P ≈ 0.000). Angle θ was stable and independent of obturator foramen morphology. When the IPTA and angle θ were used as references for placing acetabular prostheses in 136 THAs, the average postoperative valgus angles of acetabular prostheses was 45.13° ± 4.07° and the good-to-excellent rate was 97.05%. There were no short-term complications such as fracture, dislocation or infection. The average HHS score 6 months after surgery was 37.2 higher than the preoperative score, this difference being significant (P < 0.01). Neither infection nor dislocation was found 6 months after surgery.
CONCLUSIONS: The IPTA (at the apex of the true acetabulum) and angle θ (obtained by intraoperative fluoroscopy) are consistent in determining the postoperative valgus angle of acetabular prosthesis during THA. Thus, IPTA and angle θ are of value in guiding placement of acetabular prostheses; in particular, this method can facilitate the learning of young surgeons.
© 2016 Chinese Orthopaedic Association and John Wiley & Sons Australia, Ltd.

Entities:  

Keywords:  Cup inclination; Iliopubic tangential angle; Radiographic method; Total hip arthroplasty

Mesh:

Year:  2016        PMID: 27627718      PMCID: PMC6584096          DOI: 10.1111/os.12272

Source DB:  PubMed          Journal:  Orthop Surg        ISSN: 1757-7853            Impact factor:   2.071


  26 in total

1.  Reduction in variability of acetabular cup abduction using computer assisted surgery: a prospective and randomized study.

Authors:  T Leenders; D Vandevelde; G Mahieu; R Nuyts
Journal:  Comput Aided Surg       Date:  2002

2.  Effect of cementless acetabular component orientation, position, and containment in total hip arthroplasty for congenital hip disease.

Authors:  George Georgiades; George C Babis; Georgia Kourlaba; George Hartofilakidis
Journal:  J Arthroplasty       Date:  2010-03-23       Impact factor: 4.757

3.  Intraoperative pelvic motion in total hip arthroplasty.

Authors:  Isao Asayama; Yuichiro Akiyoshi; Masatoshi Naito; Masamitsu Ezoe
Journal:  J Arthroplasty       Date:  2004-12       Impact factor: 4.757

4.  The transverse acetabular ligament: an aid to orientation of the acetabular component during primary total hip replacement: a preliminary study of 1000 cases investigating postoperative stability.

Authors:  H A P Archbold; B Mockford; D Molloy; J McConway; L Ogonda; D Beverland
Journal:  J Bone Joint Surg Br       Date:  2006-07

5.  Surgical variables influence metal ion levels after hip resurfacing.

Authors:  Nicholas M Desy; Stephane G Bergeron; Alain Petit; Olga L Huk; John Antoniou
Journal:  Clin Orthop Relat Res       Date:  2011-06       Impact factor: 4.176

6.  Quantification of pelvic tilt in total hip arthroplasty.

Authors:  Jinjun Zhu; Zhinian Wan; Lawrence D Dorr
Journal:  Clin Orthop Relat Res       Date:  2009-08-28       Impact factor: 4.176

7.  Acetabular component orientation in intra- and postoperative positions in total hip arthroplasty.

Authors:  Keiko Hayakawa; Yukihide Minoda; Masaharu Aihara; Akira Sakawa; Kenji Ohzono; Koichi Tada
Journal:  Arch Orthop Trauma Surg       Date:  2008-04-22       Impact factor: 3.067

8.  Correlation between inclination of the acetabular component and metal ion levels in metal-on-metal hip resurfacing replacement.

Authors:  R De Haan; C Pattyn; H S Gill; D W Murray; P A Campbell; K De Smet
Journal:  J Bone Joint Surg Br       Date:  2008-10

9.  Surgical treatment of limb-length discrepancy following total hip arthroplasty.

Authors:  Javad Parvizi; Peter F Sharkey; Gina A Bissett; Richard H Rothman; William J Hozack
Journal:  J Bone Joint Surg Am       Date:  2003-12       Impact factor: 5.284

10.  The transverse acetabular ligament may be used to align the acetabular cup in total hip arthroplasty.

Authors:  C J Pearce; S A Sexton; D C Davies; A Khaleel
Journal:  Hip Int       Date:  2008 Jan-Mar       Impact factor: 1.756

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.