Literature DB >> 27421084

Characterizing microcrack orientation distribution functions in osteonal bone samples.

U Wolfram1,2, J J Schwiedrzik2,3, M J Mirzaali2, A Bürki2, P Varga4, C Olivier5,6, F Peyrin5,6, P K Zysset2.   

Abstract

Prefailure microdamage in bone tissue is considered to be the most detrimental factor in defining its strength and toughness with respect to age and disease. To understand the influence of microcracks on bone mechanics it is necessary to assess their morphology and three-dimensional distribution. This requirement reaches beyond classic histology and stereology, and methods to obtain such information are currently missing. Therefore, the aim of the study was to develop a methodology that allows to characterize three-dimensional microcrack distributions in bulk bone samples. Four dumbbell-shaped specimens of human cortical bone of a 77-year-old female donor were loaded beyond yield in either tension, compression or torsion (one control). Subsequently, synchrotron radiation micro-computed tomography (SRμCT) was used to obtain phase-contrast images of the damaged samples. A microcrack segmentation algorithm was developed and used to segment microcrack families for which microcrack orientation distribution functions were determined. Distinct microcrack families were observed for each load case that resulted in distinct orientation distribution functions. Microcracks had median areas of approximately 4.7 μm2 , 33.3 μm2 and 64.0 μm2 for tension, compression and torsion. Verifying the segmentation algorithm against a manually segmented ground truth showed good results when comparing the microcrack orientation distribution functions. A size dependence was noted when investigating the orientation distribution functions with respect to the size of the volume of interest used for their determination. Furthermore, a scale separation between tensile, compressive and torsional microcracks was noticeable. Visual comparison to classic histology indicated that microcrack families were successfully distinguished. We propose a methodology to analyse three-dimensional microcrack distributions in overloaded cortical bone. Such information could improve our understanding of bone microdamage and its impact on bone failure in relation to tissue age and disease.
© 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

Entities:  

Keywords:  Cortical bone; X-ray phase micro-tomography; microcrack segmentation; microdamage; orientation distribution function; synchrotron radiation

Mesh:

Year:  2016        PMID: 27421084     DOI: 10.1111/jmi.12440

Source DB:  PubMed          Journal:  J Microsc        ISSN: 0022-2720            Impact factor:   1.758


  2 in total

1.  Comparison of the 3D-Microstructure Between Alveolar and Iliac Bone for Enhanced Bioinspired Bone Graft Substitutes.

Authors:  Rene Rothweiler; Christian Gross; Emely Bortel; Sarah Früh; Javier Gerber; Elodie Boller; Jonas Wüster; Andres Stricker; Tobias Fretwurst; Gerhard Iglhaut; Susanne Nahles; Rainer Schmelzeisen; Bernhard Hesse; Katja Nelson
Journal:  Front Bioeng Biotechnol       Date:  2022-06-17

2.  Determinants of bone damage: An ex-vivo study on porcine vertebrae.

Authors:  Mohammad J Mirzaali; Flavia Libonati; Davide Ferrario; Luca Rinaudo; Carmelo Messina; Fabio M Ulivieri; Bruno M Cesana; Matteo Strano; Laura Vergani
Journal:  PLoS One       Date:  2018-08-16       Impact factor: 3.240

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.