Literature DB >> 27304708

Poly(ethylenimine)-Functionalized Monolithic Alumina Honeycomb Adsorbents for CO2 Capture from Air.

Miles A Sakwa-Novak1, Chun-Jae Yoo1, Shuai Tan1, Fereshteh Rashidi1, Christopher W Jones2.   

Abstract

The development of practical and effective gas-solid contactors is an important area in the development of CO2 capture technologies. Target CO2 capture applications, such as postcombustion carbon capture and sequestration (CCS) from power plant flue gases or CO2 extraction directly from ambient air (DAC), require high flow rates of gas to be processed at low cost. Extruded monolithic honeycomb structures, such as those employed in the catalytic converters of automobiles, have excellent potential as structured contactors for CO2 adsorption applications because of the low pressure drop imposed on fluid moving through the straight channels of such structures. Here, we report the impregnation of poly(ethylenimine) (PEI), an effective aminopolymer reported commonly for CO2 separation, into extruded monolithic alumina to form structured CO2 sorbents. These structured sorbents are first prepared on a small scale, characterized thoroughly, and compared with powder sorbents with a similar composition. Despite consistent differences observed in the filling of mesopores with PEI between the monolithic and powder sorbents, their performance in CO2 adsorption is similar across a range of PEI contents. A larger monolithic cylinder (1 inch diameter, 4 inch length) is evaluated under conditions closer to those that might be used in large-scale applications and shows a similar performance to the smaller monoliths and powders tested initially. This larger structure is evaluated over five cycles of CO2 adsorption and steam desorption and demonstrates a volumetric capacity of 350 molCO2  m-3monolith and an equilibration time of 350 min under a 0.4 m s(-1) linear flow velocity through the monolith channels using 400 ppm CO2 in N2 as the adsorption gas at 30 °C. This volumetric capacity surpasses that of a similar technology considered previously, which suggested that CO2 could be removed from air at an operating cost as low as $100 per ton.
© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Entities:  

Keywords:  adsorption; amines; carbon storage; mesoporous materials; polymers

Mesh:

Substances:

Year:  2016        PMID: 27304708     DOI: 10.1002/cssc.201600404

Source DB:  PubMed          Journal:  ChemSusChem        ISSN: 1864-5631            Impact factor:   8.928


  2 in total

1.  Parametrical Study on CO2 Capture from Ambient Air Using Hydrated K2CO3 Supported on an Activated Carbon Honeycomb.

Authors:  Rafael Rodríguez-Mosqueda; Eddy A Bramer; Timo Roestenberg; Gerrit Brem
Journal:  Ind Eng Chem Res       Date:  2018-02-28       Impact factor: 3.720

2.  Developing Eco-Friendly and Cost-Effective Porous Adsorbent for Carbon Dioxide Capture.

Authors:  Mahboubeh Nabavinia; Baishali Kanjilal; Noahiro Fujinuma; Amos Mugweru; Iman Noshadi
Journal:  Molecules       Date:  2021-03-31       Impact factor: 4.411

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.