Literature DB >> 27040493

Tacky cyclic olefin copolymer: a biocompatible bonding technique for the fabrication of microfluidic channels in COC.

Nico Keller1, Tobias M Nargang1, Matthias Runck1, Frederik Kotz1, Andreas Striegel1, Kai Sachsenheimer1, Denis Klemm1, Kerstin Länge1, Matthias Worgull1, Christiane Richter1, Dorothea Helmer1, Bastian E Rapp1.   

Abstract

Cyclic olefin copolymer (COC) is widely used in microfluidics due to its UV-transparency, its biocompatibility and high chemical resistance. Here we present a fast and cost-effective solvent bonding technique, which allows for the efficient bonding of protein-patterned COC structures. The bonding process is carried out at room temperature and takes less than three minutes. Enzyme activity is retained upon bonding and microstructure deformation does not occur.

Entities:  

Mesh:

Substances:

Year:  2016        PMID: 27040493     DOI: 10.1039/c5lc01498k

Source DB:  PubMed          Journal:  Lab Chip        ISSN: 1473-0189            Impact factor:   6.799


  7 in total

Review 1.  Organ-on-a-chip engineering: Toward bridging the gap between lab and industry.

Authors:  Qasem Ramadan; Mohammed Zourob
Journal:  Biomicrofluidics       Date:  2020-07-14       Impact factor: 2.800

2.  Investigation of Solvent-Assisted In-Mold Bonding of Cyclic Olefin Copolymer (COC) Microfluidic Chips.

Authors:  Qiang Li; Bingyan Jiang; Xianglin Li; Mingyong Zhou
Journal:  Micromachines (Basel)       Date:  2022-06-18       Impact factor: 3.523

3.  Permanent Hydrophobic Surface Treatment Combined with Solvent Vapor-Assisted Thermal Bonding for Mass Production of Cyclic Olefin Copolymer Microfluidic Chips.

Authors:  Tianyu Guan; Sineenat Yuket; Hengji Cong; Douglas William Carton; Nan Zhang
Journal:  ACS Omega       Date:  2022-05-31

4.  Plug-and-play polymer microfluidic chips for hydrated, room temperature, fixed-target serial crystallography.

Authors:  Deepshika Gilbile; Megan L Shelby; Artem Y Lyubimov; Jennifer L Wierman; Diana C F Monteiro; Aina E Cohen; Silvia Russi; Matthew A Coleman; Matthias Frank; Tonya L Kuhl
Journal:  Lab Chip       Date:  2021-12-07       Impact factor: 7.517

Review 5.  Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production.

Authors:  Chia-Wen Tsao
Journal:  Micromachines (Basel)       Date:  2016-12-10       Impact factor: 2.891

6.  Cyclic Olefin Copolymer Microfluidic Devices for Forensic Applications.

Authors:  Brigitte Bruijns; Andrea Veciana; Roald Tiggelaar; Han Gardeniers
Journal:  Biosensors (Basel)       Date:  2019-07-04

Review 7.  Recent Advances in Thermoplastic Microfluidic Bonding.

Authors:  Kiran Giri; Chia-Wen Tsao
Journal:  Micromachines (Basel)       Date:  2022-03-20       Impact factor: 2.891

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.