Discovery of a New Class of Sortase A Transpeptidase Inhibitors to Tackle Gram-Positive Pathogens: 2-(2-Phenylhydrazinylidene)alkanoic Acids and Related Derivatives.

A FRET-based random screening assay was used to generate hit compounds as sortase A inhibitors that allowed us to identify ethyl 3-oxo-2-(2-phenylhydrazinylidene)butanoate as an example of a new class of sortase A inhibitors. Other analogues were generated by changing the ethoxycarbonyl function for a carboxy, cyano or amide group, or introducing substituents in the phenyl ring of the ester and acid derivatives. The most active derivative found was 3-oxo-2-(2-(3,4dichlorophenyl)hydrazinylidene)butanoic acid (2b), showing an IC50 value of 50 µM. For a preliminary assessment of their antivirulence properties the new derivatives were tested for their antibiofilm activity. The most active compound resulted 2a, which showed inhibition of about 60% against S. aureus ATCC 29213, S. aureus ATCC 25923, S. aureus ATCC 6538 and S. epidermidis RP62A at a screening concentration of 100 µM.

1. Introduction

Antibiotic resistance is a very important challenge and in 2015 the World Health Organization (WHO) considered it as one of the most important global health problems [1]. The overuse of antibiotics, both in <n class="Gene">span class="Species">human and animal populations, plays an important part in the appearance of drug-resistant strains.

The drug resistance of Gram-positive pathogens is currently of great significance and in this context <n class="Gene">span class="Species">Staphylococcus aureus that is responsible of both acute and chronic <ne">span>n class="Disease">infectious diseases has an extraordinary ability to develop antibiotic-resistance [2]. Its great versatility as a pathogen is due to a huge number of virulence factors [3]. Among the most important virulence factors that it displays during the pathogenesis, the cell-wall associated proteins called microbial surface components recognizing adhesive matrix molecules (MSCRAMMs) can promote the adherence to host tissue by interacting with fibronectin. Other aspects of pathogenesis such as invasion, escape from host defences and the formation of biofilms, that cause chronic infectious diseases or biomaterial associated infections, are also due to the MSCRAMMs [4,5].

Sortase A (SrtA) is the enzyme that incorporates the MSCRAMMs to the peptidoglycan through the following mechanism: the enzyme first cleaves the bond in the sorting signal between the threonine (T) and the glycine (G) residues of a <span class="Chemical">LPxTGn> motif of cellular proteins; then it causes the formation of a thio<span class="Chemical">ester acyl-enzyme intermediate; the last step is a transpeptidation of an <span class="Chemical">amide bond of the carboxyl terminal of threonine and the amine terminus of a pentaglycine cross bridge in peptidoglycan precursors [6].

<span class="Species">S. aureusn> strains lacking the SrtA gene do not display surface proteins at the cell wall. Therefore, SrtA mutant strains are less virulent than wild strains and they are defective during their pathogenic action [7]. At least twenty different <span class="Species">S. aureus surface proteins that carry a C-terminal LPxTG motif have been described. These virulence factors include protein A (Spa), two fibronectin binding proteins (FnbpA and FnbpB) and two clumping factors (ClfA and ClfB). Some of these proteins play key roles in biofilm formation [7,8].

An anti-virulence strategy based on agents that target virulence determinants could be effective in preventing the biofilm formation of Gram positive bacteria that are naturally resistant to current antibiotics. Considering that the first crucial step in staphylococcal pathogenesis and biofilm formation is bacterial adhesion, promoted by the surface exposed protein class="Chemical">ns at the cell wall, we presume that the new inhibitory agents targeting the sortase enzyme that links surface proteins to the cell wall are potentially more useful rather than any single MSCRAMM involved in the pathogenesis [9]. Consequently, sortase A is a good target to develop novel anti-virulence agents and new classes of SrtA inhibitors could tackle the first stage of <span class="Disease">infectious disease process and biofilm formation [10].

A number of promising small synthetic organic compounds that work as effective SrtA inhibitors and could be developed as anti-virulence drugs, were recently reviewed [11]. Most of classes of described inhibitors (<span class="Chemical">diarylacrylonitrilesn> [12], <span class="Chemical">rhodanines [13], pyridazinones [13], pyrazolethiones [13], 3,6-disubstituted triazolothiadiazol [14], aryl(β-amino)ethyl ketones [15] and benzo-[d]isothiazol-3(2H)-one adamantanes [16], were identified by high-throughput screening (HTS) or virtual screening. SrtA is an ideal target not associated with bacterial growth and cell death, but rather related to virulence [17]. Moreover, as opposed to conventional antibiotics, in response to which the evolution of resistance by the pathogens is advantageous and nearly unavoidable, in the case of antivirulence agents, the bacterial resistance is potentially costly and therefore less probable.

Starting from these consideration class="Chemical">ns and in continuation of our research work on antibacterial and antibiofilm agents [18,19,20,21,22], we thought it would be of interest to obtain novel SrtA inhibitors, showing more molecular diversity than the known ones, which could interfere with Gram positive virulence mechanisms as well as the biofilm formation. In order to achieve this goal, we randomly screened 200 compounds synthesized in our laboratory hoping to obtain positive hits. A high-throughput FRET-assay that monitors the SrtA-driven hydrolysis of an internally quenched fluorescent substrate (<span class="Chemical">dabcyl-QALPETGEE-edans) was used to test the compounds and select sortase- specific inhibitors [16]. Among the 200 screened compounds, the most active were the <span class="Chemical">phenylhydrazinylidene derivatives 1a and 2, where 1a, with an IC50 value of 192 µM, was selected as a hit (Figure 1).

Figure 1

Structure of phenylhydrazinylidene derivatives 1a and 2.

2. Results and Discussion

2.1. Chemistry

A new set of compounds 1b–f, analogs of compound 1a, were prepared. The phenyl ring of 1b–f bears different substituents in order to obtain a good discrimination as regards hydrophobic, electronic and steric effects. We additionally synthesized compounds 5a–f, in which the carboxyethyl group of 1a–f is replaced with a carboxy group and 6a and 7a, which bear a carboxyamido or <n class="Gene">span class="Chemical">cyano group replacing the carboxyethyl group of 1a. Finally, analogues 1g,h and 5g,h were prepared, in which the acetyl group is replaced by a benzoyl group. All the compounds were obtained as shown in Scheme 1.

Scheme 1

Synthetic route for compounds 1a–h, 5a–h, 6a and 7a.

The <span class="Chemical">diazonium saltsn> 4a–f obtained from the <span class="Chemical">anilines 3a–f were reacted with ethyl acetoacetate or ethyl benzoylacetate to give the ester derivatives 1a–h, which, in turn, were transformed into the corresponding acids 5a–h (Scheme 1). Similarly, the analogue 6a was obtained by reacting 4a with 3-aminocrotononitrile. Finally, the carboxyamido derivative 7a was obtained by reacting 1a with ammonia.

<span class="Chemical">Estersn> 1a–d,f,g, the <span class="Chemical">cyano and carboxyamido derivatives 6a and 7a were already described. The reported synthetic method was further modified, and the abovementioned <span class="Chemical">esters 1a–d,f,g, and compound 7a were obtained.

It is well established that the above class of derivatives exist in the <span class="Chemical">arylhydrazinylidenen> (<span class="Chemical">arylhydrazone) form [23,24], however one needs to assign the geometrical structure of the substituted C=N double bond. The structure of compounds 1a–d,f,g is missing in some previously reported articles or a mixture of the E and Z forms is reported [25,26,27,28]. Moreover, opposite geometries were proposed for the same phenylhydrazinylidene derivative [29,30]. However, the crystallographically determined geometrical structure for compounds 1a,f ( isomers) [31,32] is in agreement with that obtained by IR and 1H-NMR spectra [29,32]. At this point it was thought of interest to establish the geometrical structure of all the remaining compounds as this class of derivatives is not sufficiently investigated. The reported 1H-NMR assignment of the geometrical structures of compounds 1a,f is based on the NH and CH3CO chemical shifts. For the compounds that bear the E structure, in which the NH and acetyl groups are intramolecularly bonded (see Figure 2), the NH and methyl signals are located to lower field as compared to the Z isomer: NH(E) about δ 14.85, NH(Z) about δ 12.80; CH3CO(E) about δ 2.6, CH3CO(Z) about δ 2.5. Considering these data, the geometrical structure of compounds 1b–e was assigned on the basis of their 1H-NMR spectra. The esters 1b,c,e, show in the 1H-NMR spectra the signal for NH in the range δ 14.61–14.90 and that for the methyl moiety of the acetyl group in the range δ 2.59–2.61, therefore the same structure of 1a,f (E form) was assigned. As regards compound 1d, its 1H-NMR spectrum shows the NH signal at δ 12.70 and the methyl one at δ 2.53, values which are compatible with the Z form. The geometrical structures of ethyl benzoylacetate derivatives 1g,h, were assigned on the basis of the comparison between the 1H-NMR spectra of these compounds and that of ethyl 2-(2-phenyl-hydrazinyilidene)mesoxalate (8, see Figure 2) [23]. The 1H-NMR spectrum of compound 8 shows a singlet at δ 12.76 for the NH group intramolecularly bonded to the carboxylate one. The 1H-NMR spectra of 1g,h show the NH signal at chemical shift values very near to δ 12.76, that is δ 12.74 and 12.60, respectively, therefore the Z structure was assigned to these compounds. The cyano derivative 6a shows a signal in the 1H-NMR spectrum at δ 9.49 which excludes the H-bond of the NH with the carbonyl group. This view is supported by the 1H-NMR spectrum of 2-(2-phenylhydrazinylidene)propanodinitrile (9) [33] (see Figure 2), which shows the NH chemical shift at δ 9.57, a value very near to δ 9.49. Compound 6 might presumably be arranged to a dimeric form of type 10 where each single molecule show the E structure (see Figure 3). Finally, the acetoacetamide derivative 7a exists in the Z form, as indicated by 13C- and 15N-NMR studies reported in the literature (see Figure 3) [34].

Figure 2

Reported NH chemical shift values of the geometrical structures of compounds 1a,f, ethyl (2-phenylhydrazinylidene)mesoxalate (8) and 2-(2-phenylhydrazinylidene)propanedinitrile (9).

Figure 3

Dimeric structure 10 of (2E)-3-oxo-2-(2-phenylhydrazinylidene)butanenitrile (6a) and structures of (2Z)-3-oxo-2-(2-phenylazohydrazinylidene)butanamide 7a and (2Z)-acids 5a–h.

All the spectroscopic data of 5a,d,f that were only partially and inaccurately reported in a previously published article [35], were de novo recorded and are reported herein. The n class="Chemical">1H-NMR spectra of all compounds 5 showed the same pattern, i.e., two distinct signals in the range δ 13.70–14.35, attributable to the NH and carboxy groups. The IR spectra showed absorptions in the range of 1697–1704 cm−1 for bonded carbonyl groups, and a very broad band in the 3200–2500 cm−1 range for the carboxy group. These values are compatible with a Z structure in which two strong intramolecular <span class="Chemical">hydrogen bonds exist (see Figure 3). This type of structural arrangement has been confirmed by X-ray diffraction studies on compound 5a [36].

2.2. Biology

The <span class="Chemical">estersn> 1b–h, the acids 5a–h and compounds 6a and 7a were tested for their inhibitory activity, utilizing the assay monitoring enzymatic hydrolysis of sortase A FRET substrate analogue <span class="Chemical">dabcyl-QALPETGEE-edans (Table 1). In accordance with preliminary data the esters 1b–h were poorly active or inactive. The acids 5a–h showed IC50 values in the range of 50–100 µM. The phenyl substitution in the phenylhydrazinylidene moiety does not play a determinant role for the activity. However, it seems that strong electron withdrawing groups in the phenyl ring, such as two chlorine atoms or a nitro group, can afford a moderate increase in the inhibitory activity in comparison to unsubstituted phenyl, possibly due to a more acidic NH group. On the contrary, the presence of electron releasing groups, such as a methyl or three methoxyl groups, produce a slight decrease of the activity. Replacement of the acetyl group with the benzoyl one in compounds 5 afforded a slight decrease of activity. Finally, the cyano derivative 6a showed the same activity as compared to 5a, whereas the amide 7a, was less active than all the acids.

Table 1

Activity as sortase A inhibitors of compounds 1a–h, 5a–h, 6a, 7a.

Entry	Compounds	IC50 µM
1	1a	192
2	1b	ns
3	1c	ns
4	1d	100
5	1e	110
6	1f	ns
7	1g	ns
8	1h	ns
9	5a	80
10	5b	50
11	5c	87
12	5d	57
13	5e	92
14	5f	100
15	5g	98
16	5h	100
17	6a	80
18	7a	120
19	PVS 1	736
20	BC 2	120
21	DPDAP 3	10

1 Phenyl vinyl sulfone; 2 Berberine chloride; 3 1-(3,4-dichlorophenyl)-3-dimethylamino-1-propanone; ns = not significant; IC50 ≥ 500 µM.

Tests for the antibiofilm activity of the most active SrtA inhibitors 5a–h, 6a and 7a were performed to assess their preliminary antivirulence properties. The compounds were tested for their ability to interfere with biofilm formation of <n class="Gene">span class="Species">S. aureus ATCC 29213, <ne">span>n class="Species">S. aureus ATCC 25923, S. aureus ATCC 6538 and S. epidermidis RP62A at a screening concentration of 100 µM (see Table 2), a concentration at which planktonic strains were not susceptible (MIC > 270 µM). We found that all the above phenylhydrazinylidene derivatives interfered with biofilm formation. With the exception of S. aureus ATCC 2913, the presence of substituents in the phenyl ring of derivatives 5b–f, independently of their hydrophobic and electronic properties, does not offer any advantage for the biofilm inhibitory activity. In fact, the most active compound was 5a, showing inhibition of biofilm formation of about 60% at 100 µM against all the tested strains. A slight positive effect on the inhibition of biofilm formation of S. aureus 29213 strains was observed for compounds 5b–d, which bear an electron-withdrawing substituent in the phenyl ring.

Table 2

Inhibition of biofilm formation of compounds 5a–h, 6a and 7a at 100 μM concentration.

Comp.	Percentages of Inhibition of Biofilm Formation
	S. aureus 25923	S. aureus 29213	S. aureus 6538	S. epidermidis RP62A
5a	68.3 ± 2.0	62.3 ± 1.5	60.1 ± 1.7	61.5 ± 1.2
5b	39.2 ± 1.4	71.3 ± 6.4	22.0 ± 0.9	29.1 ± 1.4
5c	41.1 ± 0.7	69 ± 4.6	30.3 ± 0.4	22.9 ± 1.3
5d	45.3 ± 1.7	73.7 ± 0.8	53.6 ± 1.8	48.6 ± 1.6
5e	28.8 ± 2.9	34.8 ± 1.3	48.2 ± 0.9	27.1 ± 1.2
5f	33.8 ± 2.7	40.8 ± 2.1	40.3 ± 1.9	24.4 ± 0.9
5g	36.8 ± 2.1	36.9 ± 1.2	41.9 ± 1.7	23.7 ± 0.7
5h	55.9 ± 2.6	42.7 ± 3.7	70.1 ± 2.1	45.4 ± 1.6
6a	45.1 ± 2.9	46.2 ± 2.3	51 ± 0.9	34.8 ± 1.8
7a	42.1 ± 1.8	48.2 ± 2.9	42.8 ± 1.1	45.9 ± 2.1

Replacement of the acetyl group with the benzoyl one (5g) in compound 5a led to a decrease of activity for all tested strain class="Chemical">ns. For the analogue compound 5h, bearing two <span class="Chemical">chlorine atoms linked to the phenyl ring, the antibiofilm activity was slightly increased only against the <span class="Species">S. aureus 6538 strain. Finally, replacement of the carboxy group of 5a with the cyano and carboxamide groups that resulted respectively in derivatives 6a and 7a, allowed only to obtain the analogues less active than 5a.

3. Experimental Section

3.1. Chemistry

3.1.1. General

All commercial chemicals were purchased from Aldrich (Sigma-Aldrich, St. Louis, MO, USA). Reaction progress was monitored by TLC on <span class="Chemical">silican> gel plates (Merck 60, F254, 0.2 mm, Merck spa, Vimodrone, Italy) and visualization on TLC was achieved by UV light. Organic solutions were dried over <span class="Chemical">Na2SO4. Evaporation refers to the removal of solvent on a rotary evaporator under reduced pressure. All melting points were determined on a Büchi 530 capillary melting point apparatus (Buchi Italia srl, Cornaredo, Italy) and are uncorrected. IR spectra were recorded with a Spectrum RXI FT-IR System spectrophotometer (Perkin Elmer Italia spa, Milano, Italy) as solids in KBr discs. UV spectra were recorded with a Cary 50 Scan UV-Visible Spectrophotometer (Varian Medical System Italia, Cernusco sul Naviglio, Italy). 1H-NMR and 13C-NMR spectra were recorded in CDCl3 at 300.13 and 75.47 MHz respectively, using an AC series 300 MHz spectrometer (Bruker, Milano, Italia; tetramethylsilane as the internal standard): chemical shifts are expressed in δ values (ppm). Microanalyses data (C, H, N) were obtained by an Elemental Vario EL III apparatus (Elemetal Analysensysteme, Hanau, Germany) and are within ±0.4% of the theoretical values. Yields refer to products after crystallization. The name of the compounds was obtained using the ACD/Chem Sketch FREEWARE ver. 14.00 (ACD/Lab, Toronto, ON, Canada).

Physicochemical and spectroscopic data are also reported for the previously reported derivatives 1b–d,f,g. Spectroscopic data allow for the correct assignment of the geometry. The synthetic procedure and a more detailed physicochemical and structural characterization of compound 7a are also reported as only 13C- and n class="Chemical">15N-NMR data of this compound were previously reported [34].

Some 1H-NMR and n class="Chemical">13C-NMR spectras were presented in Supplementary Materials.

3.1.2. General Procedure for the Synthesis of Compounds 1a–h

The appropriate <span class="Chemical">anilinen> (0.012 mol) in 5 N aqueous <span class="Chemical">HCl solution (6 mL) was diazotized under stirring at 0–5 °C by addition of a solution of NaNO2 (0.88 g in 3 mL of water). After 10 min a saturated NaOAc aqueous solution was added until pH 5, followed dropwise by that of ethyl acetoacetate (1.53 mL) and NaOAc (1.44 g in 2.4 mL water) in ethanol (9 mL), maintaining the temperature under 10 °C. The reaction mixture was stirred at 5–10 °C for 30 min then at room temperature for 90 min. The precipitate of the arylhydrazinylidene derivative was filtered off, washed with water and crystallized from the appropriate solvent or purified by preparative TLC (silica gel plate, layer thickness 2 mm).

<span class="Chemical">Ethyl (2E)-3-Oxo-2-(2-phenylhydrazinylidene)butanoaten> (1a). Yield 91%; m.p.: 78–80 °C (<span class="Chemical">MeOH), lit. [29] 80 °C (<span class="Chemical">MeOH), spectroscopic data are in accord with those reported in the literature [25,29].

<span class="Chemical">Ethyl (2E)-3-Oxo-2-(2-(3,4-dichlorophenyl)hydrazinylidene)butanoaten> (1b). Yield 62%; m.p.: 100–102 °C (<span class="Chemical">cycloexane), lit. [27] 71 °C (ethanol, E/Z mixture); IR ν[cm−1]: 3157 (NH), 1708 (CO); 1H-NMR (CDCl3) δ [ppm]: 1.40 (t, 3H, CH3, J = 7.2 Hz), 2.59 (s, 3H, CH3), 4.35 (q, 2H, CH2, J = 7.2 Hz); 7.19–7.55 (m, 3H, aromatic protons); 14.60 (s, 1H, exchangeable with D2O, NH); 13C-NMR (CDCl3) δ [ppm]: 14.31 (CH3); 30.82 (CH3); 61.26 (CH2); 115.52 (CH); 117.84 (CH); 127.06 (C); 128.76(C); 131.14 (CH); 133.77 (C); 141.21 (C); 164.53 (COOC2H5); 197.43 (CH3CO).

<span class="Chemical">Ethyl (2E)-3-Oxo-2(2-(3-chlorophenyl)hydrazinylidene)butanoaten> (1c). Yield: 45%; m.p.: 70–72 °C (<span class="Chemical">cyclohexane), lit. [26] 83–85 °C, (crude /Z mixture); IR ν[cm−1]: 3100 (NH), 1703 (CO); UV (ethanol) λmax [nm], Log ε: 234, 4.14; 350, 4.25; 1H-NMR (CDCl3) δ [ppm]: 1.42 (t, 3H, CH3, J = 7.2 Hz), 2.59 (s, 3H, CH3), 4.34 (q, 2H, CH2, J = 7.2 Hz), 7.11–7.47 (m, 4H, aromatic protons), 14.63 (s, 1H, exchangeable with D2O, NH). 13C-NMR (CDCl3) δ [ppm]: 14.31 (CH3); 30.81 (CH3); 61.13 (CH2); 114.53 (CH); 116.28 (CH); 125.45 (CH); 126.64 (C); 130.49 (CH); 135.50 (C); 142.85 (C); 164.67 (COOC2H5); 197.26 (CH3CO).

<span class="Chemical">Ethyl (2Z)-3-Oxo-2(2-(4-nitrophenyl)hydrazinylidene)butanoaten> (1d). Yield: 70%; m.p.: 120–122 °C (<span class="Chemical">ethanol), lit. [26] 127.5–128 °C, (crude E/Z mixture); IR ν[cm−1]: 3156 (NH); 1684 (CO). 1H-NMR (CDCl3) δ [ppm]: 1.42 (t, 3H, CH3, J = 7.2 Hz), 2.53 (s, 3H, CH3), 4.40 (q, 2H, CH2, J = 7.2 Hz), 7.41 (d, 2H, aromatic protons, J = 8.7 Hz), 8.28 (d, 2H, aromatic protons, J = 8.7 Hz), 12.70 (s, 1H, exchangeable with D2O, NH); 13C-NMR (CDCl3) δ [ppm]: 14.03 (CH3); 26.91 (CH3); 62.09 (CH2); 115.10 (2 × CH); 126.04 (2 CH); 130.35 (C); 143.88(C); 146.50 (C); 163.10 (COOC2H5); 194.15 (CH3CO).

<span class="Chemical">Ethyl (2E)-3-Oxo-2-(2-(3,4,5-trimethoxyphenyl)hydrazinylidene)butanoaten> (1e). Yield: 20%; m.p. 78–80 °C (<span class="Chemical">cyclohexane); IR ν[cm−1]: 3142 (NH), 1701 (CO); 1H-NMR (CDCl3) δ [ppm]: 1.40 (t, 3H, CH3, J = 7.2 Hz), 2.61 (s, 3H, CH3), 3.86 (s, 3H, CH3), 3.91 (s, 6H, 2 CH3), 4.34 (q, 2H, CH2, J = 7.2 Hz), 6.92 e 6.70 (s, 2H, aromatic protons), 14.84 (s, 1H, exchangeable with D2O, NH). 13C-NMR (CDCl3) δ [ppm]: 14.26 (CH3); 30.77 (CH3); 56.10 (2 OCH3); 60.87 (CH2); 61.07 (OCH3); 93.75 (2 CH); 125.53 (C); 135.89 (C); 137.73 (C); 154.08 (2 C); 164.92 (COOC2H5); 196.94 (CH3CO). Anal. Calc. for C15H20N2O6: C, 55.55%; H, 6.22%; N, 8.64%. Found: C, 55.25%; H, 5.92%; N, 8.39%.

<span class="Chemical">Ethyl (2E)-3-Oxo-2-(2-(4-methylphenyl)hydrazinylidene)butanoaten> (1f). Yield: 63%; m.p.: 70–72 °C (<span class="Chemical">cyclohexane), lit. [32] 80–81 °C, (E/Z mixture); IR ν[cm−1]: 3447 (NH); 1700 (CO); 1H-NMR (CDCl3) δ [ppm]: 1.40 (t, 3H, CH3, J = 7.2 Hz), 2.34 (s, 3H, CH3), 2.58 (s, 3H, CH3), 4.33 (q, 2H, CH2, J = 7.2 Hz), 7.18 (d, 2H, aromatic protons, J = 8.4 Hz), 7.32 (d, 2H, aromatic protons, J = 8.7 Hz), 14.90 (s, 1H, exchangeable with D2O, NH). 13C-NMR (CDCl3) δ [ppm]: 14.35 (CH3); 21.03 (CH3); 30.77 (CH3); 60.87 (CH2); 116.40 (2 CH); 125.48 (C); 130.09 (2 CH); 135.77 (C); 139.56 (C); 165.14 (COOC2H5); 197.07 (CH3CO).

<span class="Chemical">Ethyl (2Z)-3-Oxo-3-phenyl-2-(2-phenylhydrazinylidene)propanoaten> (1g). Yield 60%; m.p. 63–65 °C (<span class="Chemical">MeOH), lit. [23] 65 °C (MeOH); IR ν[cm−1]: 3229, 3196 (NH), 1675 (CO); 1H-NMR (CDCl3) δ [ppm]: 1.37 (t, 3H, CH3, J = 7.2 Hz), 4.37 (q, 2H, CH2, J = 7.2 Hz), 7.10–7.95 (a set of signal, 10H, 2 C6H5), 12.74 (s, 1H, exchangeable with D2O, NH ).

<span class="Chemical">Ethyl (2Z)-3-oxo-3-phenyl-2-(2-(3,4-dichlorophenyl)hydrazinylidene)-propanoaten> (1h). Yield: 62%; m.p. 96–98 °C (<span class="Chemical">cycloexane); IR ν[cm−1]: 3168, 3200 (NH), 1673 (CO); 1H-NMR (CDCl3) δ [ppm]: 1.34 (t, 3H, CH3, J = 7.2 Hz), 4.36 (q, 2H, CH2, J = 7.2 Hz), 6.98–7.94 (a set of signal, 8H, C6H5 and C6H3), 12.60 (s, 1H, NH). Anal. Calc. for C17H14Cl2N2O3: C, 55.91%; H, 3.86%; N, 7.67%. Found: C, 56.14%; H, 3.58%; N, 7.50%.

3.1.3. General Procedure for the Preparation of Compounds 5a–h

To a solution of <span class="Chemical">arylhydrazinylidenen> derivative 1a–h (5 g) in <span class="Chemical">ethanol (50 mL) an aqueous solution of 5 N NaOH (12 mL) was added. The mixture was stirred at room temperature for 20 h. The collected sodium salt was washed with ethanol and solubilized in cold water. The water solution was acidified with 37% aqueous hydrochloric acid and the solid was filtered off, washed with water and recrystallized from a suitable solvent.

<span class="Chemical">(2Z)-3-Oxo-2-(2-phenylhydrazinylidene)butanoic acidn> (5a). Yield: 68%; m.p. 155–157 °C (<span class="Chemical">ethanol), lit. [35] 160–161 °C (aqueous ethanol); IR ν[cm−1]: 3200–2500 (NH, and OH), 1698 (CO); 1H-NMR (CDCl3) δ [ppm]: 2.60 (s, 3H, CH3), 7.24–7.47 (m, 3H, aromatic protons), 13.93 (s, 1H, exchangeable with D2O, NH), 14.09 (s, 1H, exchangeable with D2O, COOH). Anal. Calc. for C10H10N2O3: C, 58.25%; H, 4.89%; N, 13.59%. Found: C, 58.51%; H, 4.58%; N, 13.76%.

<span class="Chemical">(2Z)-3-Oxo-2-(2-(3,4-dichlorophenyl)hydrazinylidene)butanoic acidn> (5b). Yield: 56%; m.p.: 218–220 °C (<span class="Chemical">ethanol); IR ν[cm−1]: 3200–2500 (NH, and OH), 1697 (CO); 1H-NMR (CDCl3) δ [ppm]: 2.61 (s, 3H, CH3), 7.24–7.58 (m, 3H, aromatic protons), 13.81 (s, 1H, exchangeable with D2O, NH), 14.01 (s, 1H, exchangeable with D2O, COOH). Anal. Calc. for C10H8Cl2N2O3: C, 43.66%; H, 2.93%; N, 10.18%. Found: C, 43.99%; H, 2.61%; N, 10.30%.

<span class="Chemical">(2Z)-3-Oxo-2-(2-(3-chlorophenyl)hydrazinylidene)butanoic acidn> (5c). Yield: 50%; m.p.: 148–150 °C (<span class="Chemical">ethanol); IR ν[cm−1]: 3200–2500 (NH and OH), 1698 (CO); UV (ethanol) λmax [nm], Log ε: 255, 3.91; 360, 4.01; 1H-NMR (CDCl3) δ [ppm]: 2.61 (s, 3H, CH3), 7.21–7.49 (m, 4H, aromatic protons), 13.83 (s, 1H, exchangeable with D2O, NH), 14.00 (s, 1H, exchangeable with D2O, OH); 13C-NMR (CDCl3) δ [ppm]: 24.57 (CH3), 115.03 (CH), 116.47 (CH), 124.10 (C), 126.70 (CH); 130.86 (CH), 136.23 (C), 141.87(C); 165.56 (COOH); 202.23 (CH3CO). Anal. Calc. for C10H9ClN2O3: C, 49.91%; H, 3.77%; N, 11.64%. Found: C, 50.25%; H, 3.82%; N, 11.89%.

<span class="Chemical">(2Z)-3-Oxo-2-(2-(4-nitrophenyl)hydrazinylidene)butanoic acidn> (5d). Yield: 41%; m.p.: 202–204 °C (<span class="Chemical">1,4-dioxane), lit. [35] 194–195 °C (aqueous ethanol); IR ν[cm−1]: 3200–2400 (NH and OH), 1700 (CO); 1H-NMR (CDCl3) δ [ppm]: 2.65 (s, 3H, CH3); 7.56 (d, 2H, aromatic protons, J = 9.0 Hz), 8.34 (d, 2H, aromatic protons, J = 9.0 Hz), 13.70 (s, 1H, exchangeable with D2O, NH), 14.11 (s, 1H, exchangeable with D2O, OH); 13C-NMR (CDCl3) δ [ppm]: 24.74 (CH3), 116.45 (2×CH), 125.65 (C), 125.87 (2 × CH), 145.33 (C), 145.47 (C), 164.85 (COOH), 202.27 (CHCO). Anal. Calc. for C10H9N3O5: C, 47.81%; H, 3.61%; N, 16.73%. Found: C, 48.15%; H, 3.32%; N, 16.64%.

<span class="Chemical">(2Z)-3-Oxo-2-(2-(3,4,5-trimethoxyphenyl)hydrazinylidene)butanoic acidn> (5e). Yield: 32%; m.p.: 150–152 °C (<span class="Chemical">ethanol); IR ν[cm−1]: 3200–2500 (NH and OH); 1693 (CO). 1H-NMR (CDCl3) δ [ppm]: 2.60 (s, 3H, CH3); 3.87 (s, 3H, CH3); 3.92 (s, 6H, 2 × CH3); 6.70 (s, 2H, aromatic protons); 14.00 (s, 1H, exchangeable with D2O, NH); 14.10 (s, 1H, exchangeable with D2O, OH); 13C-NMR (CDCl3) (δ): 23.82 (CH3); 55.76 (2 × CH3); 60.63 (CH3); 93.63 (2 CH); 122.73 (C); 136.24 (C); 136.58 (C); 153.78 (2 C); 165.31 (COOH); 201.10 (CH3CO). Anal. Calc. for C13H16N2O6: C, 52.70%; H, 5.44%; N, 9.46%. Found: C, 52.55%; H, 5.30%; N, 9.58%.

<span class="Chemical">(2Z)-3-Oxo-2-(2-(4-methylphenyl)hydrazinylidene)butanoic acidn> (5f). Yield: 75%; m.p.: 182–184 °C (<span class="Chemical">ethanol/NNDMF), lit. [35] 198–199 °C (aqueous ethanol); IR: ν[cm−1]: 3200–2655 (NH and OH); 1695 (CO); 1H-NMR (CDCl3) δ [ppm]: 2.38 (s, 3H, CH3); 2.58 (s, 3H, CH3); 7.22–7.36 (dd, 4H, aromatic protons); 13.98 (s, 1H, exchangeable with D2O, NH); 14.08 (s, 1H, exchangeable with D2O, OH). 13C-NMR (CDCl3) δ [ppm]: 21.12 (CH3); 21.03 (CH3); 24.37 (CH3); 116.64 (2 × CH); 123.13 (C); 130.08 (2 × CH); 137.18 (C); 138.51 (C); 165.81 (COOH); 201.80 (CHCO). Anal. Calc. for C11H12N2O3: C, 59.99%; H, 5.49%; N, 12.72%. Found: C, 59.97%; H, 5.35%; N, 12.66%.

<span class="Chemical">(2Z)-3-Oxo-3-phenyl-2-(2-phenylhydrazinylidene)propanoic acidn> (5g). Yield: 35%; m.p. 136–138°C (<span class="Chemical">ethanol); IR: ν[cm−1]: 3200–2500, multiple bands (NH and COOH); 1H-NMR (CDCl3) δ [ppm]: 7.24–7.90 (a set of signal, 10 H, 2 × C6H5), 14,28 (s, 1H, NH or COOH), 14.35 (s, 1H, COOH or NH). 13C-NMR (CDCl3) (δ): 116.88 (CH), 122.89 (C), 126.87 (CH), 127.94 (CH), 129.85 (CH), 130.70 (CH), 132.64 (CH), 136.50 (C), 140.90 (C), 166.41 (COOH), 195.65 (C6H5CO). Anal. Calc. for C15H12N2O3: C, 67.16%; H, 4.51%; N, 10.44%. Found: C, 67.15%; H, 4.88%; N, 10.37%.

<span class="Chemical">(2Z)-3-Oxo-2-(2-(3,4-dichlorophenyl)hydrazinylidene)-3-phenylpropanoic acidn> (5h). Yield: 60% m.p. 202–204 °C (<span class="Chemical">ethyl acetate); IR: ν[cm−1]: 3200–2400, multiple bands, NH and COOH; 1H-NMR (CDCl3) δ [ppm]: 7.11–7.88 (a set of signal, 8H, C6H5 and C6H3), 14.15 (s, 2H, NH and COOH). 13C-NMR (DMSO) (δ): 115.85 (CH), 117.28 (CH), 127.94 (CH), 125.42 (C), 128.66 (CH), 130.42 (CH), 130.86 (C), 131.67 (CH), 132.24 (C), 133.24 (CH), 137.30 (C), 143.06 (C), 164.13 (COOH), 190.79 (C6H5CO). Anal. Calc. for C15H10Cl2N2O3: C, 53.44%; H, 2.99%; N, 8.31%. Found: C, 53.45%; H, 3.19%; N, 8.36%.

3.1.4. (2E)-3-Oxo-2-(2-phenylhydrazinylidene)butanenitrile (6a)

See reference [37].

3.1.5. (2Z)-3-Oxo-2-(2-phenylhydrazinylidene)butanamide (7a)

A solution of <span class="Chemical">ethyl (2E)-3-oxo-2-(2-(phenylhydrazinylidene)butanoaten> (290 mg, 1.5 mmol) in <span class="Chemical">ethanol (3 mL) was treated with 30% (w/v) aqueous ammonia (9 mL) under reflux for 8 h. The mixture was allowed to stand at r.t. for 12 h. The resulting solid product was filtered off and recrystallized from cyclohexane. Yield: 30%; m.p.: 134–136 °C; IR: ν[cm−1]: 3181, 3220s, 3355; 1H-NMR (CDCl3) δ [ppm]: 2.54 (s, 3H, CH3), 5.73 (s, 1H, NH), 7.18–7.39 (a set of signal, 5H, C6H5), 9.09 (s, 1H, NH), 14.60 (s, 1H, NH). 13C-NMR resonance values are according with literature data [34].

3.2. Biology

3.2.1. Enzyme Activity Assay

3.2.1.1 Expression of Recombinant Sortase A

Recombinant and catalytically active sortase A with the N-terminal deletion of residues 1–59 and possessing C-terminal <span class="Chemical">hexahistidinen> sequence (SrtAΔN59-6His) was used for the enzyme activity assay. SrtAΔN59-6His was prepared according to a slightly modified previously published method [16]. Briefly, after the <span class="Chemical">IPTG induction of the E. coli BL21 (DE3) transformed strain, the cell pellet was collected by centrifugation and resuspended in lysis buffer, and the recombinant protein was purified by affinity chromatography on a Ni-NTA column (Qiagen spa, Milano, Italy). The enzyme was eluted with an imidazole gradient and the fractions containing the protein were further purified by the gel filtration. A Superdex 75 (GE Healthcare srl, Milano, Italy) column, which was equilibrated with 10 mM sodium phosphate (pH 7.0) buffer containing 100 mM NaCl and 1 mM DTT, was used for the final purification. The fractions containing the protein were collected and concentrated to 10 mg/mL. The purified protein was analyzed using matrix-assisted laser desorption-ionization time-of-flight (MALDI-TOF) mass spectroscopy and SDS-PAGE Coomassie Blue staining.

3.2.1.2. HTS Screening of Candidate Compounds and Secondary Assays of the Selected Hits and Synthesized Analogues 1a–h, 2a–h, 6a and 7a

All of the compounds were prepared as 10 mM stock solutions in <n class="Gene">span class="Chemical">dimethyl sulfoxide (<ne">span>n class="Chemical">DMSO) and used for the IC50 determination. The compounds were screened at a single dose of 100 µM (1% DMSO) in black 384-well plates (Greiner Bio-One, Kremsmunster, Australia). Two known sortase inhibitors, phenyl vinyl sulfone [38] and 1-(3,4-dichlorophenyl)-3-(dimethylamino)- propan-1-one [15], were used as the positive controls. The inhibitory activity of all of the compounds was assessed by quantifying the increase in fluorescence intensity upon cleavage of the FRET-peptide dabcyl-QALPETGEE-edans, which was used as the sortase substrate. A previously published method [39] was used with slight modifications. Briefly, the reactions were performed in a volume of 100 µL containing 50 mM Tris-HCl, 5 mM CaCl2, 150 mM NaCl, pH 7.5, 10 µM S. aureus SrtA, 20 µM fluorescent peptide substrate dabcyl-QALPETGEE-edans, and the prescribed concentrations of the test compounds or positive controls.

The peptide substrate without the recombinant SrtA was incubated in the same manner and used as a negative control. The reactions were conducted for 24 h at 37 °C, and the fluorescence emitted with an excitation wavelength of 350 nm and an emission wavelength of 495 nm after substrate cleavage was recorded.

End-point determination of product formation was used as a criterion for the primary screening. This determination was made by measuring the total product fluorescence 24 h after the initiation of the reaction. The relative inhibition activity was determined as %I = 100% − (Fsample/Fcontrol*100%), where Fsample is the fluorescence intensity of the well containing the corresponding test compound and Fcontrol is the fluorescence of the positive control reaction without inhibition.

For the IC50 determination, 10 μM <span class="Species">S. aureusn> sortase A was preincubated in the reaction buffer with increasing concentrations of the inhibitory compounds (x–y μM) for 1 h at 37 °C prior to the addition of the <span class="Chemical">dabcyl-QALPETGEE-edans substrate to a final concentration of 50 µM. The total fluorescence was recorded at 1-min intervals for 1 h, and the progress curves were constructed. The initial velocities of the biphasic reactions were obtained through nonlinear regression, as previously described [40,41]. The IC50 values were determined by fitting the obtained data to the following default four-parameter variable slope sigmoidal function in SigmaPlot 12.5 using a nonlinear least squares algorithm:

3.3. Antibacterial and Antibiofilm Evaluation

3.3.1. Microbial Strains

The reference strains <n class="Gene">span class="Species">S. aureus ATCC 29213, <span>n class="Species">S. aureus ATCC 25923, S. aureus ATCC 6538 and S. epidermidis RP62A were used in the assays.

3.3.2. Minimum Inhibitory Concentrations (MIC)

MICs of <span class="Chemical">phenylhydrazinylidenen>-derivatives were determined by a micro-method as previously described [42]. Tryptic Soy Broth (TSB, Sigma-Aldrich srl, Milano, Italy) containing 2% <span class="Chemical">glucose was used as medium.

3.3.3. Biofilm Capability Evaluation (Safranin Method)

The staphylococcal strains were tested for their ability to form biofilms. Briefly, bacteria were grown in TSB containing 2% <n class="Gene">span class="Chemical">glucose overnight at 37 °C in a shaking bath and then diluted 1:200 to a suspension with optical density (OD) of about 0.040 at 570 nm [21]. <ne">span>n class="Chemical">Polystyrene 24-well tissue culture plates were filled with 1 mL of diluted suspension and incubated for 24 h at 37 °C. The wells were then washed three times with 1 mL of sterile phosphate-buffered saline (PBS) and stained with 1 mL of safranin 0.1% v/v for 1 min. The excess stain was removed by placing the plates under running tap water. Plates were dried overnight in an inverted position at 37 °C. Safranin-stained adherent bacteria in each well were re-dissolved to homogeneity in 1 mL of 30% v/v glacial acetic acid, and the OD was read at 492 nm. Each assay was performed in triplicate and repeated at least twice.

3.3.4. Interference with Biofilm Formation Assay

The procedure described above was used to evaluate the activity of <span class="Chemical">phenyl-hydrazinylidenen>-derivatives in the prevention of biofilm formation. <span class="Chemical">Polystyrene 24-well tissue culture plates were filled with 1 mL of diluted bacterial suspension, obtained and diluted as previously described, and a concentration of 100 µM of each compound was directly added to the bacterial suspension at time zero and incubated at 37 °C for 24 h. The wells were then washed and stained with <span class="Chemical">safranin as per the biofilm forming assay. By comparing the average optical density (O.D.) of the growth control wells with the sample wells, the following formula was used to calculate the percentages of inhibition for each concentration of the sample:

Each assay was performed in triplicate and assays were repeated at least twice.

4. Conclusions

In conclusion, we have synthesized a novel class of small molecules displaying micromolar inhibitory activity against <n class="Gene">span class="Species">S. aureus SrtA. These derivatives were screened for their activity against the enzyme using a FRET assay. Structure-activity relationship studies on compound 1a (IC50 = 192 µM) have led us to obtain a more active derivative 5b (IC50 = 50 µM) that could be the subject of further studies for the development of new anti-virulence agents.

3,4	a	b	c	d	e	f
R	H	3-4,Cl2	3-Cl	4-NO2	3,4,5-OCH3	4-CH3

1,5,6,7	a	b	c	d	e	f	g	h
R	H	3-4,Cl2	3-Cl	4-NO2	3,4,5-OCH3	4-CH3	H	3-4,Cl2
R1	CH3	CH3	CH3	CH3	CH3	CH3	C6H5	C6H5