| Literature DB >> 26877706 |
Dominic P Affron1, James A Bull1.
Abstract
Saturated heterocycles, such as THFs,Entities:
Keywords: C–H arylation; Homogeneous catalysis; N Heterocycles; O Heterocycles; Palladium
Year: 2015 PMID: 26877706 PMCID: PMC4736452 DOI: 10.1002/ejoc.201501300
Source DB: PubMed Journal: European J Org Chem ISSN: 1099-0690
Scheme 1Directed C(sp3)–H arylation: acyclic, cyclic and heterocyclic substrates.
Figure 1Substrate classes in this study optimized through a concise optimization protocol, posing questions of stereoselectivity or mono vs. bis‐arylation (DG = CONHQ, X = Boc, Cbz).
Figure 2Process and parameters used for optimization of the C–H arylation for each substrate. [a] Reactions were performed at 0.3 m concentration with respect to amide. [b] Using preferred solvent and Pd source from round 1; 1 equiv. Ag2CO3, 30 mol‐% PivOH. [c] Using preferred solvent, Pd source and base from rounds 1 and 2.
Optimization of the C–H arylation of THF carboxamide 1.
|
| ||||
|---|---|---|---|---|
| Entry | Round | Varied conditions | Yield | RSM |
| 1 | 1 | AgOAc, Pd(OAc)2, toluene | 46 | 54 |
| 2 | 1 | AgOAc, Pd(TFA)2, toluene | 13 | 87 |
| 3 | 1 | AgOAc, Pd(OAc)2, | 57 | 43 |
| 4 | 1 | AgOAc, Pd(OAc)2, no solvent | 79 | 21 |
| 5 | 2 | Ag2CO3, Pd(OAc)2, no solvent | 19 | 81 |
| 6 | 2 | Ag2CO3, PivOH, Pd(OAc)2, no solvent | 56 | 44 |
| 7 | 2 | K2CO3, PivOH, Pd(OAc)2, no solvent | 6 | 94 |
| 8 | 2 | CsOAc, Pd(OAc)2, no solvent | 17 | 83 |
Yield of product 2a or recovered starting material 1 determined by 1H NMR spectroscopy with respect to an internal standard (1,3,5‐trimethoxybenzene).
Average yield of 2 reactions.
1 equiv. Ag2CO3.
30 mol‐% PivOH.
Scheme 2Selected scope of aryl iodides compatible with the C–H arylation reaction of THF carboxamide 1.
Scheme 3Selective removal of the 8‐aminoquinoline directing group to afford either the trans‐acid 3 or cis‐acid 4.
Optimization of C–H arylation of N‐Boc‐pyrrolidinecarboxamide 5.
|
| ||||
|---|---|---|---|---|
| Entry | Round | Varied conditions | Yield | RSM |
| 1 | 1 | AgOAc, Pd(OAc)2, toluene (0.3 | 18 | 82 |
| 2 | 1 | AgOAc, Pd(TFA)2, toluene (0.3 | 0 | 100 |
| 3 | 1 | AgOAc, Pd(OAc)2, | 10 | 90 |
| 4 | 1 | AgOAc, Pd(OAc)2, no solvent | 21 | 79 |
| 5 | 2 | Ag2CO3, Pd(OAc)2, toluene (0.3 | 24 | 76 |
| 6 | 2 | Ag2CO3, PivOH, Pd(OAc)2, toluene (0.3 | 40 | 60 |
| 7 | 2 | K2CO3, PivOH, Pd(OAc)2, toluene (0.3 | 3 | 97 |
| 8 | 2 | CsOAc, Pd(OAc)2, toluene (0.3 | 12 | 88 |
| 9 | 3 | Ag2CO3, PivOH, Pd(OAc)2, toluene (0.2 | 33 | 67 |
| 10 | 3 | Ag2CO3, PivOH, Pd(OAc)2, toluene (0.5 | 33 | 67 |
| 11 | 3 | Ag2CO3, PivOH, Pd(OAc)2, toluene (1.0 | 36 | 64 |
| 12 | 3 | Ag2CO3, PivOH, Pd(OAc)2, no solvent | 34 | 66 |
Yield of product 6a or recovered starting material 5 determined by 1H NMR spectroscopy with respect to an internal standard (1,3,5‐trimethoxybenzene).
Average yield of 3 reactions.
1 equiv. Ag2CO3.
30 mol‐% PivOH.
Average yield of 2 reactions.
Scheme 4Selected scope of aryl iodides compatible with the C–H arylation reaction of N‐Boc‐pyrrolidinecarboxamide 5.
Optimization of C–H arylation of N‐Boc‐pyrrolidinecarboxamide 5.
|
| ||||
|---|---|---|---|---|
| Entry | Round | Varied conditions | Yield | RSM |
| 1 | 1 | AgOAc, Pd(OAc)2, toluene (0.3 | 18 | 82 |
| 2 | 1 | AgOAc, Pd(TFA)2, toluene (0.3 | 0 | 100 |
| 3 | 1 | AgOAc, Pd(OAc)2, | 10 | 90 |
| 4 | 1 | AgOAc, Pd(OAc)2, no solvent | 21 | 79 |
| 5 | 2 | Ag2CO3, Pd(OAc)2, toluene (0.3 | 24 | 76 |
| 6 | 2 | Ag2CO3, PivOH, Pd(OAc)2, toluene (0.3 | 40 | 60 |
| 7 | 2 | K2CO3, PivOH, Pd(OAc)2, toluene (0.3 | 3 | 97 |
| 8 | 2 | CsOAc, Pd(OAc)2, toluene (0.3 | 12 | 88 |
| 9 | 3 | Ag2CO3, PivOH, Pd(OAc)2, toluene (0.2 | 33 | 67 |
| 10 | 3 | Ag2CO3, PivOH, Pd(OAc)2, toluene (0.5 | 33 | 67 |
| 11 | 3 | Ag2CO3, PivOH, Pd(OAc)2, toluene (1.0 | 36 | 64 |
| 12 | 3 | Ag2CO3, PivOH, Pd(OAc)2, no solvent | 34 | 66 |
Yield of product 6a or recovered starting material 5 determined by 1H NMR spectroscopy with respect to an internal standard (1,3,5‐trimethoxybenzene).
Average yield of 3 reactions.
1 equiv. Ag2CO3.
30 mol‐% PivOH.
Average yield of 2 reactions.
Scheme 5Selected scope of aryl iodides compatible with the C–H arylation reaction of N‐Cbz‐piperidinecarboxamide 7.
Optimization of the C–H arylation of N‐Boc‐piperidinecarboxamide 9.
|
| ||||
|---|---|---|---|---|
| Entry | Round | Varied conditions | Yield | RSM |
| 1 | 1 | AgOAc, Pd(OAc)2, toluene | 47 | 50 |
| 2 | 1 | AgOAc, Pd(TFA)2, toluene | 14 | 85 |
| 3 | 1 | AgOAc, Pd(OAc)2, | 53 | 47 |
| 4 | 1 | AgOAc, Pd(OAc)2, no solvent | 90 | 10 |
| 5 | 2 | Ag2CO3, Pd(OAc)2, no solvent | 88 | 12 |
| 6 | 2 | Ag2CO3, PivOH, Pd(OAc)2, no solvent | 96 | 4 |
| 7 | 2 | K2CO3, PivOH, Pd(OAc)2, no solvent | 29 | 71 |
| 8 | 2 | CsOAc, Pd(OAc)2, no solvent | 48 | 52 |
Yield of product 10a or recovered starting material 9 determined by 1H NMR spectroscopy with respect to an internal standard (1,3,5‐trimethoxybenzene).
Average yield of 2 reactions.
1 equiv. Ag2CO3.
30 mol‐% PivOH.
Scheme 6Selected scope of aryl iodides compatible with the C–H arylation reaction of N‐Boc‐piperidinecarboxamide 9. [a] 36 h reaction time.
Scheme 7Deprotection of 10b to form amine 11 or 3‐arylpipecolinic acid derivative 12.
Optimization of the C–H arylation of THP carboxamide 13.
|
| ||||
|---|---|---|---|---|
| Entry | Round | Varied conditions |
|
|
| 1 | 1 | AgOAc, Pd(OAc)2, toluene (0.3 | 38 | 13 |
| 2 | 1 | AgOAc, Pd(TFA)2, toluene (0.3 | 22 | 3 |
| 3 | 1 | AgOAc, Pd(OAc)2, | 47 | 11 |
| 4 | 1 | AgOAc, Pd(OAc)2, no solvent | 49 | 23 |
| 5 | 2 | Ag2CO3, Pd(OAc)2, | 66 | 13 |
| 6 | 2 | Ag2CO3, PivOH, Pd(OAc)2, | 66 | 11 |
| 7 | 2 | K2CO3, PivOH, Pd(OAc)2, | 24 | 10 |
| 8 | 2 | CsOAc, Pd(OAc)2, | 32 | 6 |
| 9 | 3 | Ag2CO3, PivOH, Pd(OAc)2, | 65 | 13 |
| 10 | 3 | Ag2CO3, PivOH, Pd(OAc)2, | 62 | 17 |
| 11 | 3 | Ag2CO3, PivOH, Pd(OAc)2, | 62 | 11 |
| 12 | 3 | Ag2CO3, PivOH, Pd(OAc)2, no solvent | 61 | 16 |
Yield determined by 1H NMR spectroscopy with respect to an internal standard (1,3,5‐trimethoxybenzene). In all cases, the remainder of the mass balance corresponded to unreacted starting material 13.
Average yield of 2 reactions.
1 equiv. Ag2CO3.
30 mol‐% PivOH.
Figure 3Comparison of optimal yields and product ratios of different directing groups on THP carboxamides, following the standard optimization procedure, yields and diastereomeric ratio (dr) quoted as observed in the crude reaction mixture against an internal standard after 18 h reaction time.
Scheme 8Selected scope of aryl iodides compatible with the C–H arylation reaction of THP carboxamide 11, yield and dr of products on isolation after a 24 h reaction time.
Scheme 9Viable conformations of the palladacyclic intermediate formed from THP carboxamide 13.
Scheme 10Isolated yields for the mono and di‐selective β‐C–H arylations of cyclopentanecarboxamide 17.
Scheme 11Isolated yields for the mono and bis‐selective β‐C–H arylations of propionamide 20.