Literature DB >> 26867787

Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair.

Barbara J Klotz1, Debby Gawlitta1, Antoine J W P Rosenberg1, Jos Malda2, Ferry P W Melchels3.   

Abstract

Research over the past decade on the cell-biomaterial interface has shifted to the third dimension. Besides mimicking the native extracellular environment by 3D cell culture, hydrogels offer the possibility to generate well-defined 3D biofabricated tissue analogs. In this context, gelatin-methacryloyl (gelMA) hydrogels have recently gained increased attention. This interest is sparked by the combination of the inherent bioactivity of gelatin and the physicochemical tailorability of photo-crosslinkable hydrogels. GelMA is a versatile matrix that can be used to engineer tissue analogs ranging from vasculature to cartilage and bone. Convergence of biological and biofabrication approaches is necessary to progress from merely proving cell functionality or construct shape fidelity towards regenerating tissues. GelMA has a critical pioneering role in this process and could be used to accelerate the development of clinically relevant applications. Crown
Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  biofabrication; gelatin-methacryloyl; hydrogel; photo-crosslinking; regenerative medicine; tissue engineering

Mesh:

Substances:

Year:  2016        PMID: 26867787      PMCID: PMC5937681          DOI: 10.1016/j.tibtech.2016.01.002

Source DB:  PubMed          Journal:  Trends Biotechnol        ISSN: 0167-7799            Impact factor:   19.536


  78 in total

Review 1.  Gelatin as a delivery vehicle for the controlled release of bioactive molecules.

Authors:  Simon Young; Mark Wong; Yasuhiko Tabata; Antonios G Mikos
Journal:  J Control Release       Date:  2005-11-02       Impact factor: 9.776

2.  Immunocompatibility evaluation of hydrogel-coated polyimide implants for applications in regenerative medicine.

Authors:  Milada Sirova; Sandra Van Vlierberghe; Veronika Matyasova; Pavel Rossmann; Etienne Schacht; Peter Dubruel; Blanka Rihova
Journal:  J Biomed Mater Res A       Date:  2013-07-30       Impact factor: 4.396

3.  Reinforcement of hydrogels using three-dimensionally printed microfibres.

Authors:  Jetze Visser; Ferry P W Melchels; June E Jeon; Erik M van Bussel; Laura S Kimpton; Helen M Byrne; Wouter J A Dhert; Paul D Dalton; Dietmar W Hutmacher; Jos Malda
Journal:  Nat Commun       Date:  2015-04-28       Impact factor: 14.919

4.  Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers.

Authors:  Riccardo Levato; Jetze Visser; Josep A Planell; Elisabeth Engel; Jos Malda; Miguel A Mateos-Timoneda
Journal:  Biofabrication       Date:  2014-07-22       Impact factor: 9.954

5.  Determination of free amino groups in proteins by trinitrobenzenesulfonic acid.

Authors:  A F Habeeb
Journal:  Anal Biochem       Date:  1966-03       Impact factor: 3.365

6.  Time-resolved spectroscopic and density functional theory study of the photochemistry of Irgacure-2959 in an aqueous solution.

Authors:  Mingyue Liu; Ming-De Li; Jiadan Xue; David Lee Phillips
Journal:  J Phys Chem A       Date:  2014-09-04       Impact factor: 2.781

7.  Biological effects of residual glutaraldehyde in glutaraldehyde-tanned collagen biomaterials.

Authors:  D P Speer; M Chvapil; C D Eskelson; J Ulreich
Journal:  J Biomed Mater Res       Date:  1980-11

8.  Digital microfabrication of user-defined 3D microstructures in cell-laden hydrogels.

Authors:  Pranav Soman; Peter H Chung; A Ping Zhang; Shaochen Chen
Journal:  Biotechnol Bioeng       Date:  2013-06-03       Impact factor: 4.530

9.  Carbon-nanotube-embedded hydrogel sheets for engineering cardiac constructs and bioactuators.

Authors:  Su Ryon Shin; Sung Mi Jung; Momen Zalabany; Keekyoung Kim; Pinar Zorlutuna; Sang Bok Kim; Mehdi Nikkhah; Masoud Khabiry; Mohamed Azize; Jing Kong; Kai-Tak Wan; Tomas Palacios; Mehmet R Dokmeci; Hojae Bae; Xiaowu Shirley Tang; Ali Khademhosseini
Journal:  ACS Nano       Date:  2013-02-22       Impact factor: 15.881

10.  Proinflammatory Mediators Enhance the Osteogenesis of Human Mesenchymal Stem Cells after Lineage Commitment.

Authors:  Michiel Croes; F Cumhur Oner; Moyo C Kruyt; Taco J Blokhuis; Okan Bastian; Wouter J A Dhert; Jacqueline Alblas
Journal:  PLoS One       Date:  2015-07-15       Impact factor: 3.240

View more
  100 in total

Review 1.  Injectable Hydrogels for Cardiac Tissue Engineering.

Authors:  Brisa Peña; Melissa Laughter; Susan Jett; Teisha J Rowland; Matthew R G Taylor; Luisa Mestroni; Daewon Park
Journal:  Macromol Biosci       Date:  2018-05-07       Impact factor: 4.979

Review 2.  Converging biofabrication and organoid technologies: the next frontier in hepatic and intestinal tissue engineering?

Authors:  Kerstin Schneeberger; Bart Spee; Pedro Costa; Norman Sachs; Hans Clevers; Jos Malda
Journal:  Biofabrication       Date:  2017-03-06       Impact factor: 9.954

Review 3.  Collagen-based bioinks for hard tissue engineering applications: a comprehensive review.

Authors:  C F Marques; G S Diogo; S Pina; J M Oliveira; T H Silva; R L Reis
Journal:  J Mater Sci Mater Med       Date:  2019-03-06       Impact factor: 3.896

4.  Biofabrication of 3D cell-encapsulated tubular constructs using dynamic optical projection stereolithography.

Authors:  Soham Wadnap; Srikumar Krishnamoorthy; Zhengyi Zhang; Changxue Xu
Journal:  J Mater Sci Mater Med       Date:  2019-03-06       Impact factor: 3.896

5.  Migration dynamics of ovarian epithelial cells on micro-fabricated image-based models of normal and malignant stroma.

Authors:  Samuel Alkmin; Rebecca Brodziski; Haleigh Simon; Daniel Hinton; Randall H Goldsmith; Manish Patankar; Paul J Campagnola
Journal:  Acta Biomater       Date:  2019-09-27       Impact factor: 8.947

6.  Analysis of fibroblast migration dynamics in idiopathic pulmonary fibrosis using image-based scaffolds of the lung extracellular matrix.

Authors:  Marisa Tisler; Samuel Alkmin; Hsin-Yu Chang; Jon Leet; Ksenija Bernau; Nathan Sandbo; Paul J Campagnola
Journal:  Am J Physiol Lung Cell Mol Physiol       Date:  2019-11-27       Impact factor: 5.464

Review 7.  Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment.

Authors:  Guoyou Huang; Fei Li; Xin Zhao; Yufei Ma; Yuhui Li; Min Lin; Guorui Jin; Tian Jian Lu; Guy M Genin; Feng Xu
Journal:  Chem Rev       Date:  2017-10-09       Impact factor: 60.622

8.  The bio in the ink: cartilage regeneration with bioprintable hydrogels and articular cartilage-derived progenitor cells.

Authors:  Riccardo Levato; William R Webb; Iris A Otto; Anneloes Mensinga; Yadan Zhang; Mattie van Rijen; René van Weeren; Ilyas M Khan; Jos Malda
Journal:  Acta Biomater       Date:  2017-08-04       Impact factor: 8.947

Review 9.  Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications.

Authors:  Claire Yu; Jacob Schimelman; Pengrui Wang; Kathleen L Miller; Xuanyi Ma; Shangting You; Jiaao Guan; Bingjie Sun; Wei Zhu; Shaochen Chen
Journal:  Chem Rev       Date:  2020-04-23       Impact factor: 60.622

10.  Harnessing biomolecules for bioinspired dental biomaterials.

Authors:  Nicholas G Fischer; Eliseu A Münchow; Candan Tamerler; Marco C Bottino; Conrado Aparicio
Journal:  J Mater Chem B       Date:  2020-08-04       Impact factor: 6.331

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.