Literature DB >> 26852159

Fabrication of ciprofloxacin molecular imprinted polymer coating on a stainless steel wire as a selective solid-phase microextraction fiber for sensitive determination of fluoroquinolones in biological fluids and tablet formulation using HPLC-UV detection.

Roya Mirzajani1, Fatemeh Kardani2.   

Abstract

A molecularly imprinted polymer (MIP) fiber on stainless steel wire using ciprofloxacin template with a mild template removal condition was synthetized and evaluated for fiber solid phase microextraction (SPME) of fluoroquinolones (FQs) from biological fluids and pharmaceutical samples, followed by high performance liquid chromatography analysis with UV detection (HPLC-UV). The developed MIP fiber exhibited high selectivity for the analytes in complex matrices. The coating of the fibers were inspected using fourier transform infrared spectrophotometry, thermogaravimetric analysis, energy dispersive X-ray (EDX) spectroscopy as well as by scanning electron microscopy (SEM). The fiber shows high thermal stability (up to 300°C), good reproducibility and long lifetime. The composite coating did not swell in organic solvents nor did it strip off from the substrate. It was also highly stable and extremely adherent to the surface of the stainless steel fiber. The fabricated fiber exclusively exhibited excellent extraction efficiency and selectivity for some FQs. The effective parameters influencing the microextraction efficiency such as pH, extraction time, desorption condition, and stirring rate were investigated. Under optimized conditions, the limits of detection of the four FQs ranged from 0.023-0.033 μg L(-1) (S/N=5) and the calibration graphs were linear in the concentration range from 0.1-40 μg L(-1), the inter-day and intraday relative standard deviations (RSD) for various FQs at three different concentration level (n=5) using a single fiber were 1.1-4.4% and the fiber to fiber RSD% (n=5) was 4.3-6.7% at 5 μg L(-1) of each anlyetes. The method was successfully applied for quantification of FQs in real samples including serum, plasma and tablet formulation with the recoveries between 97 to 102%.
Copyright © 2016 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Fluoroquinolones; HPLC; Molecularly imprinted; Plasma; Serum; Solid-phase microextraction

Mesh:

Substances:

Year:  2016        PMID: 26852159     DOI: 10.1016/j.jpba.2016.01.046

Source DB:  PubMed          Journal:  J Pharm Biomed Anal        ISSN: 0731-7085            Impact factor:   3.935


  6 in total

1.  Fluorometric determination of ciprofloxacin using molecularly imprinted polymer and polystyrene microparticles doped with europium(III)(DBM)3phen.

Authors:  Zhuanying Li; Zhimeng Cui; Yiwei Tang; Xiuying Liu; Xuemei Zhang; Bingxiang Liu; Xianghong Wang; Mohamed Shehata Draz; Xue Gao
Journal:  Mikrochim Acta       Date:  2019-05-07       Impact factor: 5.833

2.  A nanocomposite consisting of graphene oxide, zeolite imidazolate framework 8, and a molecularly imprinted polymer for (multiple) fiber solid phase microextraction of sterol and steroid hormones prior to their quantitation by HPLC.

Authors:  Roya Mirzajani; Fatemeh Kardani; Zahra Ramezani
Journal:  Mikrochim Acta       Date:  2019-02-01       Impact factor: 5.833

3.  Isocratic Resolution of Fluoroquinolone-Based Antibiotics on the Phenylethyl-Bonded Phase under Nonaqueous Elution: A Consideration of the Separation Mechanism.

Authors:  Yu-Xuan Gao; Shushi Chen
Journal:  Int J Anal Chem       Date:  2018-05-31       Impact factor: 1.885

4.  Stainless Steel Wire Mesh Supported Molecularly Imprinted Composite Membranes for Selective Separation of Ebracteolata Compound B from Euphorbia fischeriana.

Authors:  Yukun Ma; Haijun Wang; Mengyan Guo
Journal:  Molecules       Date:  2019-02-04       Impact factor: 4.411

5.  Covalent Organic Framework/Polyacrylonitrile Electrospun Nanofiber for Dispersive Solid-Phase Extraction of Trace Quinolones in Food Samples.

Authors:  Jinghui Zhou; An Chen; Hongying Guo; Yijun Li; Xiwen He; Langxing Chen; Yukui Zhang
Journal:  Nanomaterials (Basel)       Date:  2022-07-20       Impact factor: 5.719

Review 6.  Recent molecularly imprinted polymers applications in bioanalysis.

Authors:  Foad Mashayekhi Suzaei; Seyed Mosayeb Daryanavard; Abbi Abdel-Rehim; Fatma Bassyouni; Mohamed Abdel-Rehim
Journal:  Chem Zvesti       Date:  2022-09-30       Impact factor: 2.146

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.