Literature DB >> 26745940

Accurate assessment and prediction of noise in clinical CT images.

Xiaoyu Tian1, Ehsan Samei2.   

Abstract

PURPOSE: The objectives of this study were (a) to devise a technique for measuring quantum noise in clinical body computed tomography (CT) images and (b) to develop a model for predicting that noise with high accuracy.
METHODS: The study included 83 clinical image sets at two dose levels (clinical and 50% reduced dose levels). The quantum noise in clinical images was measured by subtracting sequential slices and filtering out edges. Noise was then measured in the resultant uniform area. The noise measurement technique was validated using 17 clinical image cases and a turkey phantom. With a validated method to measure noise in clinical images, this noise was predicted by establishing the correlation between water-equivalent diameter (Dw) and noise in a variable-sized phantom and ascribing a noise level to the patient based on Dw estimated from CT image. The accuracy of this prediction model was validated using 66 clinical image sets.
RESULTS: The error in noise measurement was within 1.5 HU across two reconstruction algorithms. In terms of noise prediction, across the 83 clinical image sets, the average discrepancies between predicted and measured noise were 6.9% and 6.6% for adaptive statistical iterative reconstruction and filtered back projection reconstruction, respectively.
CONCLUSIONS: This study proposed a practically applicable method to assess quantum noise in clinical images. The image-based measurement technique enables automatic quality control monitoring of image noise in clinical practice. Further, a phantom-based model can accurately predict quantum noise level in patient images. The prediction model can be used to quantitatively optimize individual protocol to achieve targeted noise level in clinical images.

Entities:  

Mesh:

Year:  2016        PMID: 26745940     DOI: 10.1118/1.4938588

Source DB:  PubMed          Journal:  Med Phys        ISSN: 0094-2405            Impact factor:   4.071


  5 in total

1.  Fully automated image quality evaluation on patient CT: Multi-vendor and multi-reconstruction study.

Authors:  Minsoo Chun; Jin Hwa Choi; Sihwan Kim; Chulkyun Ahn; Jong Hyo Kim
Journal:  PLoS One       Date:  2022-07-20       Impact factor: 3.752

2.  Dose and blending fraction quantification for adaptive statistical iterative reconstruction based on low-contrast detectability in abdomen CT.

Authors:  Yifang Zhou
Journal:  J Appl Clin Med Phys       Date:  2020-01-03       Impact factor: 2.102

3.  An Improved Method of Automated Noise Measurement System in CT Images.

Authors:  Choirul Anam; Idam Arif; Freddy Haryanto; Fauzia P Lestari; Rena Widita; Wahyu S Budi; Heri Sutanto; Kusworo Adi; Toshioh Fujibuchi; Geoff Dougherty
Journal:  J Biomed Phys Eng       Date:  2021-04-01

4.  Assessment of the global noise algorithm for automatic noise measurement in head CT examinations.

Authors:  Moiz Ahmad; Dominique Tan; Sujay Marisetty
Journal:  Med Phys       Date:  2021-08-19       Impact factor: 4.506

5.  Improved precision of noise estimation in CT with a volume-based approach.

Authors:  Hendrik Joost Wisselink; Gert Jan Pelgrim; Mieneke Rook; Ivan Dudurych; Maarten van den Berge; Geertruida H de Bock; Rozemarijn Vliegenthart
Journal:  Eur Radiol Exp       Date:  2021-09-10
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.