Target and non-target analysis of migrants from PVC-coated cans using UHPLC-Q-Orbitrap MS: evaluation of long-term migration testing.

A simple, rapid and sensitive method for analyzing multi-target and non-target additives in polyvinyl chloride (PVC) food can coatings using ultra-high-performance liquid chromatography coupled to quadrupole-orbital ion-trap mass spectrometry was developed. This procedure was used to study the behaviour of a cross-linking agent, benzoguanamine (BGA), two slip agents, oleamide and erucamide, and 18 other commonly used plasticisers including phthalates, adipates, sebacates, acetyl tributyl citrate and epoxidised soybean or linseed oils. This optimised method was used to detect these analytes in food simulants (water and 3% acetic acid) in a long-term migration test of PVC-coated food cans for a period ranging from 1 day to 1.5 years at 40°C. Although very low detection limits (5 ng ml(-1)) were obtained for the majority of compounds, none of the monitored plasticisers and slip agents was detected in simulants extracted from cans over the period of the test. However, the presence of BGA in both aqueous food simulants was confirmed based on high-resolution mass spectrometry, product ion spectra and analysis of a reference standard. The BGA concentration in both simulants continued to increase with storage time: after 1.5 years storage in aqueous food simulants at 40°C, BGA was detected at concentrations up to 84 µg dm(-2). We believe this is the first study describing the long-term migration capacity of BGA from any vinyl coating material intended for use in PVC-coated food cans. Our results may have implications for migration test protocols for food cans that will be stored for extended time periods.