Literature DB >> 26662790

Improvement of the environmental and operational characteristics of vehicles through decreasing the motor fuel density.

Elena Magaril1.   

Abstract

The environmental and operational characteristics of motor transport, one of the main consumers of motor fuel and source of toxic emissions, soot, and greenhouse gases, are determined to a large extent by the fuel quality which is characterized by many parameters. Fuel density is one of these parameters and it can serve as an indicator of fuel quality. It has been theoretically substantiated that an increased density of motor fuel has a negative impact both on the environmental and operational characteristics of motor transport. The use of fuels with a high density leads to an increase in carbonization within the engine, adversely affecting the vehicle performance and increasing environmental pollution. A program of technological measures targeted at reducing the density of the fuel used was offered. It includes a solution to the problem posed by changes in the refining capacities ratio and the temperature range of gasoline and diesel fuel boiling, by introducing fuel additives and adding butanes to the gasoline. An environmental tax has been developed which allows oil refineries to have a direct impact on the production of fuels with improved environmental performance, taking into account the need to minimize the density of the fuel within a given category of quality.

Entities:  

Keywords:  Carbon dioxide-specific emission; Environmental and operational characteristics of vehicles; Environmental tax; Fuel additive; Fuel density; Oil refining

Mesh:

Substances:

Year:  2015        PMID: 26662790     DOI: 10.1007/s11356-015-5920-6

Source DB:  PubMed          Journal:  Environ Sci Pollut Res Int        ISSN: 0944-1344            Impact factor:   4.223


  5 in total

1.  Derivation of motor vehicle tailpipe particle emission factors suitable for modelling urban fleet emissions and air quality assessments.

Authors:  Diane U Keogh; Joe Kelly; Kerrie Mengersen; Rohan Jayaratne; Luis Ferreira; Lidia Morawska
Journal:  Environ Sci Pollut Res Int       Date:  2009-06-26       Impact factor: 4.223

2.  Cities, traffic, and CO2: A multidecadal assessment of trends, drivers, and scaling relationships.

Authors:  Conor K Gately; Lucy R Hutyra; Ian Sue Wing
Journal:  Proc Natl Acad Sci U S A       Date:  2015-04-06       Impact factor: 11.205

3.  Polycyclic aromatic hydrocarbons (PAHs) in urban surface dust of Guangzhou, China: Status, sources and human health risk assessment.

Authors:  Wei Wang; Min-Juan Huang; Yuan Kang; Hong-Sheng Wang; Anna O W Leung; Kwai Chung Cheung; Ming Hung Wong
Journal:  Sci Total Environ       Date:  2011-10-01       Impact factor: 7.963

4.  Chemistry of polycyclic aromatic hydrocarbons formation from phenyl radical pyrolysis and reaction of phenyl and acetylene.

Authors:  A Comandini; T Malewicki; K Brezinsky
Journal:  J Phys Chem A       Date:  2012-03-02       Impact factor: 2.781

5.  Influence of organic and inorganic markers in the source apportionment of airborne PM10 in Zaragoza (Spain) by two receptor models.

Authors:  M S Callén; J M López; A M Mastral
Journal:  Environ Sci Pollut Res Int       Date:  2012-10-23       Impact factor: 4.223

  5 in total
  2 in total

1.  Investigating the effect of MgO and CeO2 metal nanoparticle on the gasoline fuel properties: empirical modeling and process optimization by surface methodology.

Authors:  Farzin Zamankhan; Vahid Pirouzfar; Fathollah Ommi; Mohsen Valihesari
Journal:  Environ Sci Pollut Res Int       Date:  2018-06-01       Impact factor: 4.223

2.  Improving the environmental and performance characteristics of vehicles by introducing the surfactant additive into gasoline.

Authors:  Elena Magaril; Romen Magaril
Journal:  Environ Sci Pollut Res Int       Date:  2016-05-21       Impact factor: 4.223

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.