Yuqing Zhu1, Hui Chen1, Lian Cen2,3, Jun Wang1. 1. Department of Pediatric Dentistry, School of Stomatology, Ninth People's Hospital, Medical College, Shanghai Jiaotong University, Shanghai, China. 2. National Tissue Engineering Center of China, Shanghai, China. 3. School of Chemical Engineering, East China University of Science and Technology, Shanghai, China.
Abstract
BACKGROUND/AIM: The influence of abutment tooth position and adhesive point dimension on rigidity of wire-composite splints, used in dental trauma, was evaluated in vitro. MATERIALS AND METHODS: A commercial artificial resin model was used. The central incisors served as injured teeth with increased mobility (degrees of loosening II tooth 21 and III tooth 11), whereas teeth 12/22 or teeth 13/23 served as non-injured teeth with physiological mobility. Horizontal and vertical tooth mobility before and after splinting was assessed, using a universal testing machine. Teeth were splinted with a wire-composite splint (0.8 mm). Four groups were assigned with respective abutment tooth position and adhesive point dimension: group 1 (13-11-21-23, 2 × 2 mm(2) ), group 2 (12-11-21-22, 2 × 2 mm(2) ), group 3 (12-11-21-22, 3 × 3 mm(2) ), group 4 (12-11-21-22, 4 × 4 mm(2) ). RESULTS: For each group, tooth mobility after splinting was significantly higher than the physiological tooth mobility (P < 0.05). For teeth 11 and 12, no significant differences between Group 1 and 2 (P > 0.05) were found in tooth mobility after splinting. Significant differences were found in horizontal tooth mobility after splinting of tooth 11 between Group 2 and 3, Group 2 and 4 and Group 3 and 4, respectively (P < 0.05), whereas significant difference was found in vertical dimension for tooth 11 only between Group 2 and 4 (P < 0.05). Significant differences were found in horizontal mobility of tooth 21 between Group 2 and 3, and Group 2 and 4 (P < 0.05). CONCLUSION: Splinting the injured teeth 11 and 21 and the bilateral uninjured abutment teeth (teeth 12/22 or teeth 13/23) with the stainless steel wire-composite splint (0.8 mm), can be considered flexible splinting. While mobility was still higher than in unaffected teeth, increase in size of the adhesive splinting point decreased horizontal but not vertical mobility in most cases.
BACKGROUND/AIM: The influence of abutment tooth position and adhesive point dimension on rigidity of wire-composite splints, used in dental trauma, was evaluated in vitro. MATERIALS AND METHODS: A commercial artificial resin model was used. The central incisors served as injured teeth with increased mobility (degrees of loosening II tooth 21 and III tooth 11), whereas teeth 12/22 or teeth 13/23 served as non-injured teeth with physiological mobility. Horizontal and vertical tooth mobility before and after splinting was assessed, using a universal testing machine. Teeth were splinted with a wire-composite splint (0.8 mm). Four groups were assigned with respective abutment tooth position and adhesive point dimension: group 1 (13-11-21-23, 2 × 2 mm(2) ), group 2 (12-11-21-22, 2 × 2 mm(2) ), group 3 (12-11-21-22, 3 × 3 mm(2) ), group 4 (12-11-21-22, 4 × 4 mm(2) ). RESULTS: For each group, tooth mobility after splinting was significantly higher than the physiological tooth mobility (P < 0.05). For teeth 11 and 12, no significant differences between Group 1 and 2 (P > 0.05) were found in tooth mobility after splinting. Significant differences were found in horizontal tooth mobility after splinting of tooth 11 between Group 2 and 3, Group 2 and 4 and Group 3 and 4, respectively (P < 0.05), whereas significant difference was found in vertical dimension for tooth 11 only between Group 2 and 4 (P < 0.05). Significant differences were found in horizontal mobility of tooth 21 between Group 2 and 3, and Group 2 and 4 (P < 0.05). CONCLUSION: Splinting the injured teeth 11 and 21 and the bilateral uninjured abutment teeth (teeth 12/22 or teeth 13/23) with the stainless steel wire-composite splint (0.8 mm), can be considered flexible splinting. While mobility was still higher than in unaffected teeth, increase in size of the adhesive splinting point decreased horizontal but not vertical mobility in most cases.
Authors: Maria Francesca Sfondrini; Paola Gandini; Paola Tessera; Pekka K Vallittu; Lippo Lassila; Andrea Scribante Journal: Biomed Res Int Date: 2017-10-10 Impact factor: 3.411
Authors: Andrea Scribante; Paola Gandini; Paola Tessera; Pekka K Vallittu; Lippo Lassila; Maria Francesca Sfondrini Journal: Int J Mol Sci Date: 2017-10-04 Impact factor: 5.923