Ashley A Weaver1,2, Kristen M Beavers3, R Caresse Hightower1,2, Sarah K Lynch1,2, Anna N Miller4, Joel D Stitzel1,2. 1. a Virginia Tech-Wake Forest University Center for Injury Biomechanics , Winston-Salem , North Carolina. 2. b Wake Forest School of Medicine , Winston-Salem , North Carolina. 3. c Wake Forest University, Health and Exercise Science , Winston-Salem , North Carolina. 4. d Wake Forest School of Medicine, Orthopaedic Surgery , Winston-Salem , North Carolina.
Abstract
OBJECTIVE: Low bone quality is a contributing factor to motor vehicle crash (MVC) injury. Quantification of occupant bone mineral density (BMD) is important from an injury causation standpoint. The first aim of this study was to validate a technique for measuring lumbar volumetric BMD (vBMD) from phantomless computed tomography (CT) scans. The second aim was to apply the validated phantomless technique to quantify lumbar vBMD in Crash Injury Research and Engineering Network (CIREN) occupants for correlation with age, fracture incidence, and osteopenia/osteoporosis diagnoses. METHODS: Quantitative CT (qCT) and dual-energy X-ray absorptiometry (DXA) were collected prospectively for 50 subjects and used to validate a technique to measure vBMD from 281 phantomless CT scans of CIREN occupants. Hounsfield unit (HU) measurements were collected from the L1-L5 vertebrae, right psoas major muscle, and anterior subcutaneous fat for all subjects and from 3 phantom ports with known mg/cc calcium hydroxyapatite values for the validation group. qCT calibration was accomplished using regressions between the phantom HU and mg/cc values to convert L1-L5 HU values to mg/cc. A phantomless calibration technique was developed where the fat and muscle HU values were linearly regressed against fat (-69 mg/cc) and muscle (77 mg/cc) to establish a conversion for L1-L5 HU measurements to mg/cc. vBMD calculated from qCT versus the phantomless method was compared for the 50 subjects to assess agreement and a mg/cc osteopenia threshold was established using DXA T-scores. CIREN HU measurements were converted to mg/cc using the phantomless technique and the mg/cc osteopenia threshold was used to compare vBMD to age, fracture incidence, and osteopenia comorbidity classifications in CIREN. RESULTS: Linear regression of lumbar vBMD derived from the qCT versus phantomless calibrations showed excellent agreement (R(2) = 0.87, P <.0001). A 145 mg/cc threshold for osteopenia was established (sensitivity = 1, specificity = 0.57) and 44 CIREN occupants had vBMD below this threshold. Of these 44 occupants, 64% were not classified as osteopenic in CIREN, but vBMD suggested undiagnosed osteopenia. Age was negatively correlated with vBMD in both sexes (P <.0001) and CIREN occupants with less than 145 mg/cc vBMD sustained an average 1.7 additional rib/sternum fractures (P =.036). CONCLUSIONS: Because lumbar vBMD was estimated from phantomless CT scans with accuracy similar to qCT, the phantomless technique can be broadly applied to both prospectively and retrospectively assess patient bone quality for research and clinical studies related to MVCs, falls, and aging.
OBJECTIVE: Low bone quality is a contributing factor to motor vehicle crash (MVC) injury. Quantification of occupant bone mineral density (BMD) is important from an injury causation standpoint. The first aim of this study was to validate a technique for measuring lumbar volumetric BMD (vBMD) from phantomless computed tomography (CT) scans. The second aim was to apply the validated phantomless technique to quantify lumbar vBMD in Crash Injury Research and Engineering Network (CIREN) occupants for correlation with age, fracture incidence, and osteopenia/osteoporosis diagnoses. METHODS: Quantitative CT (qCT) and dual-energy X-ray absorptiometry (DXA) were collected prospectively for 50 subjects and used to validate a technique to measure vBMD from 281 phantomless CT scans of CIREN occupants. Hounsfield unit (HU) measurements were collected from the L1-L5 vertebrae, right psoas major muscle, and anterior subcutaneous fat for all subjects and from 3 phantom ports with known mg/cc calcium hydroxyapatite values for the validation group. qCT calibration was accomplished using regressions between the phantom HU and mg/cc values to convert L1-L5 HU values to mg/cc. A phantomless calibration technique was developed where the fat and muscle HU values were linearly regressed against fat (-69 mg/cc) and muscle (77 mg/cc) to establish a conversion for L1-L5 HU measurements to mg/cc. vBMD calculated from qCT versus the phantomless method was compared for the 50 subjects to assess agreement and a mg/cc osteopenia threshold was established using DXA T-scores. CIREN HU measurements were converted to mg/cc using the phantomless technique and the mg/cc osteopenia threshold was used to compare vBMD to age, fracture incidence, and osteopenia comorbidity classifications in CIREN. RESULTS: Linear regression of lumbar vBMD derived from the qCT versus phantomless calibrations showed excellent agreement (R(2) = 0.87, P <.0001). A 145 mg/cc threshold for osteopenia was established (sensitivity = 1, specificity = 0.57) and 44 CIREN occupants had vBMD below this threshold. Of these 44 occupants, 64% were not classified as osteopenic in CIREN, but vBMD suggested undiagnosed osteopenia. Age was negatively correlated with vBMD in both sexes (P <.0001) and CIREN occupants with less than 145 mg/cc vBMD sustained an average 1.7 additional rib/sternum fractures (P =.036). CONCLUSIONS: Because lumbar vBMD was estimated from phantomless CT scans with accuracy similar to qCT, the phantomless technique can be broadly applied to both prospectively and retrospectively assess patient bone quality for research and clinical studies related to MVCs, falls, and aging.
Entities:
Keywords:
ImageJ; bone quality; computed tomography; injury; osteopenia; phantomless; trauma
Authors: S Y Lee; S-S Kwon; H S Kim; J H Yoo; J Kim; J Y Kim; B C Min; S J Moon; K H Sung Journal: Osteoporos Int Date: 2015-01-16 Impact factor: 4.507
Authors: Andrea N Doud; Ashley A Weaver; Jennifer W Talton; Ryan T Barnard; J Wayne Meredith; Joel D Stitzel; Preston Miller; Anna N Miller Journal: Clin Orthop Relat Res Date: 2014-08-13 Impact factor: 4.176
Authors: Perry J Pickhardt; B Dustin Pooler; Travis Lauder; Alejandro Muñoz del Rio; Richard J Bruce; Neil Binkley Journal: Ann Intern Med Date: 2013-04-16 Impact factor: 25.391
Authors: Kristen M Beavers; Michael P Walkup; Ashley A Weaver; Leon Lenchik; Stephen B Kritchevsky; Barbara J Nicklas; Walter T Ambrosius; Joel D Stitzel; Thomas C Register; Sue A Shapses; Anthony P Marsh; W Jack Rejeski Journal: J Bone Miner Res Date: 2018-08-07 Impact factor: 6.741
Authors: Ashley A Weaver; Casey Costa; Alexander Ambrosini; Josh Tan; Lisa Maez; Xin Ye; Joel D Stitzel; Leon Lenchik Journal: Traffic Inj Prev Date: 2019-11-01 Impact factor: 1.491
Authors: Veena Aggarwal; Christina Maslen; Richard L Abel; Pinaki Bhattacharya; Paul A Bromiley; Emma M Clark; Juliet E Compston; Nicola Crabtree; Jennifer S Gregory; Eleni P Kariki; Nicholas C Harvey; Kate A Ward; Kenneth E S Poole Journal: Ther Adv Musculoskelet Dis Date: 2021-07-10 Impact factor: 5.346