Warning: Undefined array key "mm" in /www/wwwroot/www.ai-bt.com/si.php on line 10 Deprecated: trim(): Passing null to parameter #1 ($string) of type string is deprecated in /www/wwwroot/www.ai-bt.com/si.php on line 10 CORR Insights(®): Backside Wear Is Not Dependent on the Acetabular Socket Design in Crosslinked Polyethylene Liners.

× No keyword cloud information.

9 in total

1. Simulation of initial frontside and backside wear rates in a modular acetabular component with multiple screw holes.

Authors: S M Kurtz; J A Ochoa; C B Hovey; C V White
Journal: J Biomech Date: 1999-09 Impact factor: 2.712

2. Ultra-high-molecular weight polyethylene wear: an in vitro comparison of acetabular metal types and polished surfaces.

Authors: M F Shepard; J R Lieberman; J M Kabo
Journal: J Arthroplasty Date: 1999-10 Impact factor: 4.757

3. Wear of the polyethylene liner-metallic shell interface in modular acetabular components. An in vitro analysis.

Authors: J R Lieberman; R M Kay; W P Hamlet; S H Park; J M Kabo
Journal: J Arthroplasty Date: 1996-08 Impact factor: 4.757

4. Backside wear of polyethylene tibial inserts: mechanism and magnitude of material loss.

Authors: Michael A Conditt; Matthew T Thompson; Molly M Usrey; Sabir K Ismaily; Philip C Noble
Journal: J Bone Joint Surg Am Date: 2005-02 Impact factor: 5.284

Review 5. High wear rates and extensive osteolysis in 3 types of uncemented total hip arthroplasty: a review of the PCA, the Harris Galante and the Profile/Tri-Lock Plus arthroplasties with a minimum of 12 years median follow-up in 96 hips.

Authors: Geir Hallan; Stein A Lie; Leif I Havelin
Journal: Acta Orthop Date: 2006-08 Impact factor: 3.717

CORR Insights(®): Backside Wear Is Not Dependent on the Acetabular Socket Design in Crosslinked Polyethylene Liners.

1. Simulation of initial frontside and backside wear rates in a modular acetabular component with multiple screw holes.

2. Ultra-high-molecular weight polyethylene wear: an in vitro comparison of acetabular metal types and polished surfaces.

3. Wear of the polyethylene liner-metallic shell interface in modular acetabular components. An in vitro analysis.

4. Backside wear of polyethylene tibial inserts: mechanism and magnitude of material loss.

Review 5. High wear rates and extensive osteolysis in 3 types of uncemented total hip arthroplasty: a review of the PCA, the Harris Galante and the Profile/Tri-Lock Plus arthroplasties with a minimum of 12 years median follow-up in 96 hips.

6. Backside volumetric change in the polyethylene of uncemented acetabular components.

7. Polyethylene wear debris in modular acetabular prostheses.

8. Survival of uncemented acetabular monoblock cups: evaluation of 210 hips in the Swedish Hip Arthroplasty Register.

9. Retrieval analysis of Harris-Galante I and II acetabular liners in situ for more than 10 years.