Literature DB >> 26221842

In vitro model alveoli from photodegradable microsphere templates.

Katherine J R Lewis1, Mark W Tibbitt, Yi Zhao, Kelsey Branchfield, Xin Sun, Vivek Balasubramaniam, Kristi S Anseth.   

Abstract

Recreating the 3D cyst-like architecture of the alveolar epithelium in vitro has been challenging to achieve in a controlled fashion with primary lung epithelial cells. Here, we demonstrate model alveoli formed within a tunable synthetic biomaterial platform using photodegradable microspheres as templates to create physiologically relevant, cyst structures. Poly(ethylene glycol) (PEG)-based hydrogels were polymerized in suspension to form microspheres on the order of 120 μm in diameter. The gel chemistry was designed to allow erosion of the microspheres with cytocompatible light doses (≤15 min exposure to 10 mW cm(-2) of 365 nm light) via cleavage of a photolabile nitrobenzyl ether crosslinker. Epithelial cells were incubated with intact microspheres, modified with adhesive peptide sequences to facilitate cellular attachment to and proliferation on the surface. A tumor-derived alveolar epithelial cell line, A549, completely covered the microspheres after only 24 hours, whereas primary mouse alveolar epithelial type II (ATII) cells took ∼3 days. The cell-laden microsphere structures were embedded within a second hydrogel formulation at user defined densities; the microsphere templates were subsequently removed with light to render hollow epithelial cysts that were cultured for an additional 6 days. The resulting primary cysts stained positive for cell-cell junction proteins (β-catenin and ZO-1), indicating the formation of a functional epithelial layer. Typically, primary ATII cells differentiated in culture to the alveolar epithelial type I (ATI) phenotype; however, each cyst contained ∼1-5 cells that stained positive for an ATII marker (surfactant protein C), which is consistent with ATII cell numbers in native mouse alveoli. This biomaterial-templated alveoli culture system should be useful for future experiments to study lung development and disease progression, and is ideally suited for co-culture experiments where pulmonary fibroblasts or endothelial cells could be presented in the hydrogel surrounding the epithelial cysts.

Entities:  

Mesh:

Substances:

Year:  2015        PMID: 26221842      PMCID: PMC4871129          DOI: 10.1039/c5bm00034c

Source DB:  PubMed          Journal:  Biomater Sci        ISSN: 2047-4830            Impact factor:   6.843


  57 in total

1.  Modulation of pulmonary alveolar type II cell phenotype and communication by extracellular matrix and KGF.

Authors:  B E Isakson; R L Lubman; G J Seedorf; S Boitano
Journal:  Am J Physiol Cell Physiol       Date:  2001-10       Impact factor: 4.249

2.  Mechanical interactions between collagen and proteoglycans: implications for the stability of lung tissue.

Authors:  Francisco S A Cavalcante; Satoru Ito; Kelly Brewer; Hiroaki Sakai; Adriano M Alencar; Murilo P Almeida; José S Andrade; Arnab Majumdar; Edward P Ingenito; Béla Suki
Journal:  J Appl Physiol (1985)       Date:  2004-09-24

3.  Control of mitotic spindle angle by the RAS-regulated ERK1/2 pathway determines lung tube shape.

Authors:  Ross J Metzger; Gail R Martin; Nan Tang; Wallace F Marshall; Martin McMahon
Journal:  Science       Date:  2011-07-15       Impact factor: 47.728

4.  KGF regulates pulmonary epithelial proliferation and surfactant protein gene expression in adult rat lung.

Authors:  T Yano; R J Mason; T Pan; R R Deterding; L D Nielsen; J M Shannon
Journal:  Am J Physiol Lung Cell Mol Physiol       Date:  2000-12       Impact factor: 5.464

5.  Microenvironmental regulators of tissue structure and function also regulate tumor induction and progression: the role of extracellular matrix and its degrading enzymes.

Authors:  M J Bissell; P A Kenny; D C Radisky
Journal:  Cold Spring Harb Symp Quant Biol       Date:  2005

6.  Responsive culture platform to examine the influence of microenvironmental geometry on cell function in 3D.

Authors:  April M Kloxin; Katherine J R Lewis; Cole A DeForest; Gregory Seedorf; Mark W Tibbitt; Vivek Balasubramaniam; Kristi S Anseth
Journal:  Integr Biol (Camb)       Date:  2012-12       Impact factor: 2.192

7.  A 4-dimensional model of the alveolar structure.

Authors:  Hiroko Kitaoka; Gary F Nieman; Yuji Fujino; David Carney; Joseph DiRocco; Ichiro Kawase
Journal:  J Physiol Sci       Date:  2007-06-02       Impact factor: 2.781

8.  Student award for outstanding research winner in the Ph.D. category for the 9th World Biomaterials Congress, Chengdu, China, June 1-5, 2012: synthesis and application of photodegradable microspheres for spatiotemporal control of protein delivery.

Authors:  Mark W Tibbitt; Bruce W Han; April M Kloxin; Kristi S Anseth
Journal:  J Biomed Mater Res A       Date:  2012-03-23       Impact factor: 4.396

9.  Fibroblast growth factor 10 (FGF10) and branching morphogenesis in the embryonic mouse lung.

Authors:  S Bellusci; J Grindley; H Emoto; N Itoh; B L Hogan
Journal:  Development       Date:  1997-12       Impact factor: 6.868

10.  The enhancement of chondrogenic differentiation of human mesenchymal stem cells by enzymatically regulated RGD functionalities.

Authors:  Chelsea N Salinas; Kristi S Anseth
Journal:  Biomaterials       Date:  2008-03-04       Impact factor: 12.479

View more
  14 in total

1.  Biomimetics of the pulmonary environment in vitro: A microfluidics perspective.

Authors:  Janna Tenenbaum-Katan; Arbel Artzy-Schnirman; Rami Fishler; Netanel Korin; Josué Sznitman
Journal:  Biomicrofluidics       Date:  2018-05-29       Impact factor: 2.800

Review 2.  3D bioprinting for lungs and hollow organs.

Authors:  Zachary Galliger; Caleb D Vogt; Angela Panoskaltsis-Mortari
Journal:  Transl Res       Date:  2019-05-14       Impact factor: 7.012

3.  Spatially and Temporally Controlled Hydrogels for Tissue Engineering.

Authors:  Jeroen Leijten; Jungmok Seo; Kan Yue; Grissel Trujillo-de Santiago; Ali Tamayol; Guillermo U Ruiz-Esparza; Su Ryon Shin; Roholah Sharifi; Iman Noshadi; Mario Moisés Álvarez; Yu Shrike Zhang; Ali Khademhosseini
Journal:  Mater Sci Eng R Rep       Date:  2017-07-25       Impact factor: 36.214

4.  Epithelial-mesenchymal crosstalk influences cellular behavior in a 3D alveolus-fibroblast model system.

Authors:  Katherine J R Lewis; Jessica K Hall; Emi A Kiyotake; Tova Christensen; Vivek Balasubramaniam; Kristi S Anseth
Journal:  Biomaterials       Date:  2017-11-15       Impact factor: 12.479

Review 5.  Tissue-informed engineering strategies for modeling human pulmonary diseases.

Authors:  Kolene E Bailey; Michael L Floren; Tyler J D'Ovidio; Steven R Lammers; Kurt R Stenmark; Chelsea M Magin
Journal:  Am J Physiol Lung Cell Mol Physiol       Date:  2018-11-21       Impact factor: 5.464

6.  4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture.

Authors:  Connor E Miksch; Nathaniel P Skillin; Bruce E Kirkpatrick; Grace K Hach; Varsha V Rao; Timothy J White; Kristi S Anseth
Journal:  Small       Date:  2022-06-22       Impact factor: 15.153

7.  Dissolvable microgel-templated macroporous hydrogels for controlled cell assembly.

Authors:  Zhongliang Jiang; Fang-Yi Lin; Kun Jiang; Han Nguyen; Chun-Yi Chang; Chien-Chi Lin
Journal:  Biomater Adv       Date:  2022-02-14

8.  Light-inducible activation of cell cycle progression in Xenopus egg extracts under microfluidic confinement.

Authors:  Jitender Bisht; Paige LeValley; Benjamin Noren; Ralph McBride; Prathamesh Kharkar; April Kloxin; Jesse Gatlin; John Oakey
Journal:  Lab Chip       Date:  2019-10-09       Impact factor: 6.799

9.  Synthesis of microgel sensors for spatial and temporal monitoring of protease activity.

Authors:  Della S Shin; Emi Y Tokuda; Jennifer L Leight; Connor E Miksch; Tobin E Brown; Kristi S Anseth
Journal:  ACS Biomater Sci Eng       Date:  2017-03-13

10.  Designing Microgels for Cell Culture and Controlled Assembly of Tissue Microenvironments.

Authors:  Alexander S Caldwell; Brian A Aguado; Kristi S Anseth
Journal:  Adv Funct Mater       Date:  2019-12-17       Impact factor: 19.924

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.