Literature DB >> 26202889

Sirolimus-eluting dextran and polyglutamic acid hybrid coatings on AZ31 for stent applications.

Jun Ma1, Nan Zhao1, Donghui Zhu2.   

Abstract

UNLABELLED: Magnesium (Mg)-based cardiovascular stents are promising candidate as the next generation of novel stents. Clinical studies have revealed encouraging outcomes, but late restenosis and thrombogenesis still largely exist. Blood and vascular biocompatible coatings with drug-eluting features could be the solution to such problems.
OBJECTIVE: This study was to investigate the feasibility of a three-layer hybrid coating on Mg alloy AZ31 with sirolimus-eluting feature for cardiovascular stent application.
MATERIALS AND METHODS: The first and third layers were low molecular weight dextran loaded with sirolimus, and the second layer was polyglutamic acid (PGA) to control sirolimus release. The hybrid coating was verified by scanning electron microscope (SEM). DC polarization and immersion tests were used to evaluate corrosion rate of the materials. Indirect cell viability and cell proliferation tests were performed by culturing cells with extract solutions of AZ31 samples. Blood compatibility was assessed using hemolysis assay.
RESULTS: Coated samples had an enhanced corrosion resistance than that of uncoated controls, more PGA slower corrosion. Sirolimus had a burst release for the initial ∼3 days and then a slower release until reached a plateau. The PGA thickness was able to control the sirolimus release, the thicker of PGA the slower release. The overall cell viability was extract concentration-dependent, and improved by the hybrid coatings. Cell proliferation was correlated to coating thickness and was inhibited by sirolimus. In addition, all coated AZ31 samples were non-hemolytic.
CONCLUSION: Results demonstrated that such a three-layer hybrid coating may be useful to improve the vascular biocompatibility of Mg stent materials.
© The Author(s) 2015.

Entities:  

Keywords:  Hemocompatibility; biocompatibility; biodegradation; cell–material interactions; drug-eluting; surface modification; vascular

Mesh:

Substances:

Year:  2015        PMID: 26202889      PMCID: PMC4873166          DOI: 10.1177/0885328215596324

Source DB:  PubMed          Journal:  J Biomater Appl        ISSN: 0885-3282            Impact factor:   2.646


  27 in total

1.  Endothelial responses of magnesium and other alloying elements in magnesium-based stent materials.

Authors:  Nan Zhao; Donghui Zhu
Journal:  Metallomics       Date:  2014-11-03       Impact factor: 4.526

Review 2.  Biomedical coatings on magnesium alloys - a review.

Authors:  H Hornberger; S Virtanen; A R Boccaccini
Journal:  Acta Biomater       Date:  2012-04-14       Impact factor: 8.947

Review 3.  Role of magnesium in genomic stability.

Authors:  A Hartwig
Journal:  Mutat Res       Date:  2001-04-18       Impact factor: 2.433

4.  Comparison of a polymer-based paclitaxel-eluting stent with a bare metal stent in patients with complex coronary artery disease: a randomized controlled trial.

Authors:  Gregg W Stone; Stephen G Ellis; Louis Cannon; J Tift Mann; Joel D Greenberg; Douglas Spriggs; Charles D O'Shaughnessy; Samuel DeMaio; Patrick Hall; Jeffrey J Popma; Joerg Koglin; Mary E Russell
Journal:  JAMA       Date:  2005-09-14       Impact factor: 56.272

Review 5.  Polymers, drug release, and drug-eluting stents.

Authors:  Suzan Commandeur; Heleen M M van Beusekom; Wim J van der Giessen
Journal:  J Interv Cardiol       Date:  2006-12       Impact factor: 2.279

6.  Viability, adhesion, and bone phenotype of osteoblast-like cells on polyelectrolyte multilayer films.

Authors:  Petra Tryoen-Tóth; Dominique Vautier; Youssef Haikel; Jean-Claude Voegel; Pierre Schaaf; Johanna Chluba; Joëlle Ogier
Journal:  J Biomed Mater Res       Date:  2002-06-15

7.  Corrosion resistance of a composite polymeric coating applied on biodegradable AZ31 magnesium alloy.

Authors:  A Zomorodian; M P Garcia; T Moura e Silva; J C S Fernandes; M H Fernandes; M F Montemor
Journal:  Acta Biomater       Date:  2013-02-28       Impact factor: 8.947

8.  Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids.

Authors:  M Alvarez-Lopez; María Dolores Pereda; J A del Valle; M Fernandez-Lorenzo; M C Garcia-Alonso; O A Ruano; M L Escudero
Journal:  Acta Biomater       Date:  2009-05-13       Impact factor: 8.947

Review 9.  Polymer coatings and delayed arterial healing following drug-eluting stent implantation.

Authors:  R A Byrne; M Joner; A Kastrati
Journal:  Minerva Cardioangiol       Date:  2009-10       Impact factor: 1.347

10.  A polymer-based, paclitaxel-eluting stent in patients with coronary artery disease.

Authors:  Gregg W Stone; Stephen G Ellis; David A Cox; James Hermiller; Charles O'Shaughnessy; James Tift Mann; Mark Turco; Ronald Caputo; Patrick Bergin; Joel Greenberg; Jeffrey J Popma; Mary E Russell
Journal:  N Engl J Med       Date:  2004-01-15       Impact factor: 91.245

View more
  2 in total

1.  Evolution of metallic cardiovascular stent materials: A comparative study among stainless steel, magnesium and zinc.

Authors:  Jiayin Fu; Yingchao Su; Yi-Xian Qin; Yufeng Zheng; Yadong Wang; Donghui Zhu
Journal:  Biomaterials       Date:  2019-11-21       Impact factor: 12.479

2.  Bioabsorbable zinc ion induced biphasic cellular responses in vascular smooth muscle cells.

Authors:  Jun Ma; Nan Zhao; Donghui Zhu
Journal:  Sci Rep       Date:  2016-06-01       Impact factor: 4.379

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.