Literature DB >> 2619623

Measurement of thermal expansion coefficient of human teeth.

H C Xu, W Y Liu, T Wang.   

Abstract

The coefficient of thermal expansion of specimens from 60 freshly extracted human teeth were measured over the range 10-80 degrees C using a dilatometer. The coefficient increased rapidly above 50 degrees C, but there was no significant variation with tooth age between 10 and 70 years. The average values obtained were 16.96 (SD 3.83) x 10(-6)/degrees C for enamel, 10.59 (SD 2.38) x 10(-6)/degrees C for dentine, 11.90 (SD 4.42) x 10(-6)/degrees C for crowns and 9.44 (SD 0.61) x 10(-6)/degrees C for roots.

Entities:  

Mesh:

Year:  1989        PMID: 2619623     DOI: 10.1111/j.1834-7819.1989.tb04660.x

Source DB:  PubMed          Journal:  Aust Dent J        ISSN: 0045-0421            Impact factor:   2.291


  8 in total

1.  Simulation of temperature and thermally induced stress of human tooth under CO2 pulsed laser beams using finite element method.

Authors:  Mohammad Sabaeian; Mohammadreza Shahzadeh
Journal:  Lasers Med Sci       Date:  2013-07-19       Impact factor: 3.161

2.  Effect of light-curing units on the thermal expansion of resin nanocomposites.

Authors:  Jeong-Kil Park; Bock Hur; Ching-Chang Ko; Franklin García-Godoy; Hyung-Il Kim; Yong Hoon Kwon
Journal:  Am J Dent       Date:  2010-12       Impact factor: 1.522

3.  Evaluation of polymerization in fluoride-containing composite resins.

Authors:  C A Park; S H Hyun; J H Lee; H J Seol; H I Kim; Y H Kwon
Journal:  J Mater Sci Mater Med       Date:  2007-04-17       Impact factor: 3.896

Review 4.  Thermal Pain in Teeth: Electrophysiology Governed by Thermomechanics.

Authors:  Min Lin; Guy M Genin; Feng Xu; TianJian Lu
Journal:  Appl Mech Rev       Date:  2014-04-18       Impact factor: 7.281

5.  Modeling the annealing and thermal stability of silver dental amalgam.

Authors:  Hedayat Karimi; Mohammad Hadi Ghatee; Saeid Davatolhagh
Journal:  J Mol Model       Date:  2019-10-16       Impact factor: 1.810

6.  Dimensional stability of short fibre reinforced flowable dental composites.

Authors:  Raju Raju; Ginu Rajan; Paul Farrar; B Gangadhara Prusty
Journal:  Sci Rep       Date:  2021-02-25       Impact factor: 4.379

7.  Interfacial integrity of bonded restorations with self-etching adhesives: Water storage and thermo-mechanical cycling.

Authors:  Gislaine Cristine Martins; Alfonso Sánchez-Ayala; Paulo Henrique Perlatti D'Alpino; Abraham Lincoln Calixto; João Carlos Gomes; Osnara Maria Mongruel Gomes
Journal:  Eur J Dent       Date:  2012-04

8.  Comparison of composite resin and porcelain inlays for restoration of noncarious cervical lesions: An In vitro study.

Authors:  Hui Theng Chee; Wan Zaripah Wan Bakar; Zuryati Ab Ghani; Bennett T Amaechi
Journal:  Dent Res J (Isfahan)       Date:  2018 May-Jun
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.