Literature DB >> 26141977

Use of red mud (bauxite residue) for the retention of aqueous inorganic mercury(II).

David A Rubinos1, María Teresa Barral2.   

Abstract

The effectiveness of the oxide-rich residue from bauxite refining (red mud) to remove inorganic Hg(II) from aqueous solutions was assessed. The aspects studied comprised the kinetics of the process (t = 1 min-24 h), the effect of pH (3.5-11.5), the interacting effect between salt concentration (0.01-1 M NaNO3) and pH and the Hg(II) sorption isotherm. Hg leaching from spent red mud was evaluated using the toxicity characteristics leaching procedure (TCLP) method. The sorption of Hg(II) onto red mud was very fast, with most of Hg(II) (97.0-99.7%) being removed from 0.5-50 μM Hg solutions in few minutes. The kinetic process was best described by Ho's pseudo-second order equation, pointing to chemisorption as the rate controlling step. Hg(II) sorption efficiency was very high (% removal between 93.9 and 99.8%) within all the studied pH range (3.5-11.5) and added Hg concentrations (5 and 50 μM), being optimal at pH 5-8 and decreasing slightly at both lowest and highest pH. The effect of background electrolyte concentration suggests specific sorption as the main interaction mechanism between Hg(II) and red mud, but the increasing non-sorbed Hg concentrations at low and high pH for higher electrolyte concentrations also revealed the contribution of an electrostatic component to the process. The sorption isotherm showed the characteristic shape of high affinity sorbents, and it was better described by the Redlich-Peterson and Freundlich equations, which are models that assume sorbent heterogeneity and involvement of more than one mechanism. The estimated Hg(II) sorption capacity from the Langmuir equation (q m ~9 mmol/kg) was comparable to those of some inorganic commercial sorbents but lower than most bio- or specifically designed sorbents. The leachability of retained Hg(II) from spent red mud (0.02, 0.25 and 2.42 mmol Hg/kg sorbed concentration) was low (0.28, 1.15 and 2.23 μmol/kg, respectively) and accounted for 1.2, 0.5 and 0.1% of previously sorbed Hg, indicating that Hg(II) is tightly bound by red mud once sorbed.

Entities:  

Keywords:  Aluminium; Heavy metals; Industrial waste; Low-cost adsorbents; Reutilisation; Sorption

Mesh:

Substances:

Year:  2015        PMID: 26141977     DOI: 10.1007/s11356-015-4901-0

Source DB:  PubMed          Journal:  Environ Sci Pollut Res Int        ISSN: 0944-1344            Impact factor:   4.223


  44 in total

1.  Equilibrium studies for the sorption of lead from effluents using chitosan.

Authors:  J C Y Ng; W H Cheung; G McKay
Journal:  Chemosphere       Date:  2003-08       Impact factor: 7.086

2.  Adsorption of Congo red from aqueous solution onto calcium-rich fly ash.

Authors:  Bilal Acemioğlu
Journal:  J Colloid Interface Sci       Date:  2004-06-15       Impact factor: 8.128

3.  The red mud accident in ajka (hungary): plant toxicity and trace metal bioavailability in red mud contaminated soil.

Authors:  Stefan Ruyters; Jelle Mertens; Elvira Vassilieva; Boris Dehandschutter; André Poffijn; Erik Smolders
Journal:  Environ Sci Technol       Date:  2011-01-04       Impact factor: 9.028

4.  A kinetic study of trace element leachability from abandoned-mine-polluted soil treated with SS-MSW compost and red mud. Comparison with results from sequential extraction.

Authors:  C Brunori; C Cremisini; L D'Annibale; P Massanisso; V Pinto
Journal:  Anal Bioanal Chem       Date:  2005-03-09       Impact factor: 4.142

5.  Red mud and fly ash for remediation of mine sites contaminated with As, Cd, Cu, Pb and Zn.

Authors:  Anna F Bertocchi; Marcello Ghiani; Roberto Peretti; Antonio Zucca
Journal:  J Hazard Mater       Date:  2005-12-01       Impact factor: 10.588

Review 6.  Novel applications of red mud as coagulant, adsorbent and catalyst for environmentally benign processes.

Authors:  Shaobin Wang; H M Ang; M O Tadé
Journal:  Chemosphere       Date:  2008-06-16       Impact factor: 7.086

7.  Fast and efficient removal of mercury from water samples using magnetic iron oxide nanoparticles modified with 2-mercaptobenzothiazole.

Authors:  H Parham; B Zargar; R Shiralipour
Journal:  J Hazard Mater       Date:  2011-12-17       Impact factor: 10.588

8.  Mercury adsorption on granular activated carbon in aqueous solutions containing nitrates and chlorides.

Authors:  F Di Natale; A Erto; A Lancia; D Musmarra
Journal:  J Hazard Mater       Date:  2011-07-12       Impact factor: 10.588

9.  Reuse of a treated red mud bauxite waste: studies on environmental compatibility.

Authors:  Claudia Brunori; Carlo Cremisini; Paolo Massanisso; Valentina Pinto; Leonardo Torricelli
Journal:  J Hazard Mater       Date:  2005-01-14       Impact factor: 10.588

10.  Competitive effects on mercury removal by an agricultural waste: application to synthetic and natural spiked waters.

Authors:  Luciana S Rocha; Cláudia B Lopes; Bruno Henriques; Daniela S Tavares; J A Borges; Armando C Duarte; Eduarda Pereira
Journal:  Environ Technol       Date:  2014 Mar-Apr       Impact factor: 3.247

View more
  1 in total

1.  Determination of total mercury in aluminium industrial zones and soil contaminated with red mud.

Authors:  Oqil Rasulov; Andrea Zacharová; Marián Schwarz
Journal:  Environ Monit Assess       Date:  2017-07-11       Impact factor: 2.513

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.