Literature DB >> 26108429

Color and structural changes of a maxillofacial elastomer: the effects of accelerated photoaging, disinfection and type of pigments.

Panagiota Griniari1, Gregory Polyzois2, Triantafillos Papadopoulos1.   

Abstract

PURPOSE: The aim of this study was to investigate the color and structural changes of a maxillofacial silicone colored with 2 different pigments, after photoaging and immersion in disinfectants.
METHODS: Ninety-six cylindrical specimens were fabricated and divided into 3 equal groups. The specimens of the first group consisted of unpigmented silicone (Multisil Epithetik), those of the second group consisted of unpigmented silicone, colored with red functional liquid pigment (Cosmesil Reactive 0.2% wt). The specimens of the third group were fabricated using unpigmented silicone colored with red powder pigment Cosmesil Dry at 0.2% wt. Specimens of each group were divided into 4 equal subgroups (immersed in soap solution, ethanol 95° or distilled water or placed in a photoaging apparatus for 174 hours). Structural changes were examined by infrared spectroscopy (ATR-FTIR) before and after aging. Color changes (ΔΕ*) were measured using the CIE L*a*b* system. Two-way ANOVA and Tukey's test for post hoc comparison were used at a = 0.05.
RESULTS: Infrared spectroscopy showed no structural changes after immersion in solutions and photoaging, for all the materials tested. No statistically significant differences for ΔΕ* among the tested groups were found.
CONCLUSIONS: It can be concluded that no structural changes of pigmented and unpigmented silicone elastomers were observed among all aging procedures. Recorded color changes for the materials tested were within the limits of clinical acceptability after all aging procedures. Immersion in distilled water presented the best color stability, whereas photoaging, the poorest, for all materials.

Entities:  

Mesh:

Substances:

Year:  2015        PMID: 26108429     DOI: 10.5301/jabfm.5000229

Source DB:  PubMed          Journal:  J Appl Biomater Funct Mater        ISSN: 2280-8000            Impact factor:   2.604


  5 in total

1.  Effect of vulcanization temperature and dental stone colour on colour degradation of maxillofacial silicone elastomers.

Authors:  Ebru Demet Cifter; Meltem Ozdemir-Karatas; Emrah Baca; Adem Cinarli; Ali Balik; Erkan Sancakli; Bilge Gokcen-Rohlig
Journal:  BMC Oral Health       Date:  2017-03-31       Impact factor: 2.757

2.  In vitro study of effects of aging and processing conditions on colour change in maxillofacial silicone elastomers.

Authors:  Ebru Demet Cifter; Meltem Ozdemir-Karatas; Adem Cinarli; Erkan Sancakli; Ali Balik; Gulumser Evlioglu
Journal:  BMC Oral Health       Date:  2019-06-19       Impact factor: 2.757

3.  Impact of a mixture of nanofiller and intrinsic pigment on tear strength and hardness of two types of maxillofacial silicone elastomers.

Authors:  Faiza M Abdul-Ameer
Journal:  Dent Res J (Isfahan)       Date:  2020-08-14

4.  Fungicidal Effect of Lemongrass Essential Oil on Candida albicans Biofilm Pre-established on Maxillofacial Silicone Specimens.

Authors:  Shamsiahwati Mat-Rani; Natdhanai Chotprasert; Natchalee Srimaneekarn; Suwan Choonharuangdej
Journal:  J Int Soc Prev Community Dent       Date:  2021-08-13

Review 5.  The color stability of maxillofacial silicones: A systematic review and meta analysis.

Authors:  Priya Gupta; Saee Deshpande; Usha Radke; Suresh Ughade; Rajesh Sethuraman
Journal:  J Indian Prosthodont Soc       Date:  2021 Apr-Jun
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.