Literature DB >> 26090981

Pediatric Supracondylar Fractures: Variation in Fracture Patterns and the Biomechanical Effects of Pin Configuration.

Todd Jaeblon1, Steven Anthony, Alan Ogden, Joseph J Andary.   

Abstract

BACKGROUND: Transverse pediatric supracondylar fractures through the midolecranon fossa are frequently encountered and modeled in biomechanical studies. Our objective is to investigate the optimal pin configurations for low, sagittal oblique, and high fracture varieties that have not been previously investigated.
METHODS: A total of 100 synthetic composite pediatric humeri were tested. Three groups of 30 were used to simulate 1 of 3 fracture variations. Subgroups of 10 were stabilized with 2 lateral pins (2LP), 3 lateral pins (3LP), or cross K-wires (XP). The 90 fracture and 10 intact models were tested for anterior posterior (AP), medial lateral (ML), and rotational stiffness.
RESULTS: In low fractures, AP, ML, and rotational stiffness of 2LP and 3LP were similar to intact. ML stiffness was less using XP. AP and ML stiffness of 2LP and 3LP were significantly greater than XP.In oblique fractures, AP, ML, and rotational stiffness of 2LP was similar to intact but 3LP was significantly less. AP and ML stiffness of XP was significantly less. 2LP demonstrated greater AP, ML, and rotational stiffness than 3LP and XP.In high fractures, all configurations demonstrated significantly less rotational stiffness than intact and AP stiffness similar to intact. Rotational stiffness of 3LP was greater than 2LP and XP. AP and ML stiffness were not different among configurations.
CONCLUSIONS: 2LP are stiffer than 3LP and XP for sagittal oblique fractures. 2LP and 3LP stiffness were similar in low transverse fractures, and both constructs demonstrated greater stiffness than XP configuration. 3LP is preferable for high transverse fractures. XP were never stiffer than the lateral only constructs in any of the patterns tested. CLINICAL RELEVANCE: All-lateral pin constructs may provide adequate stiffness to maintain reduction of low transverse, sagittal oblique, and high transverse patterns of pediatric supracondylar humerus fractures without risk of injury to the ulnar nerve.

Entities:  

Mesh:

Year:  2016        PMID: 26090981     DOI: 10.1097/BPO.0000000000000554

Source DB:  PubMed          Journal:  J Pediatr Orthop        ISSN: 0271-6798            Impact factor:   2.324


  4 in total

1.  A comparative biomechanical study on different fixation techniques in the management of transverse metaphyseal-diaphyseal junction fractures of the distal humerus in children.

Authors:  Allieu Kamara; Xianglu Ji; Tianjing Liu; Yu Zhan; Jianjun Li; Enbo Wang
Journal:  Int Orthop       Date:  2018-05-09       Impact factor: 3.075

2.  Sagittal plane alignment affects the strength of pin fixation in supracondylar humerus fractures.

Authors:  Alexander M Bitzer; Stephen M Belkoff; Christa L LiBrizzi; Chimelie Chibututu; R Jay Lee
Journal:  Medicine (Baltimore)       Date:  2021-06-04       Impact factor: 1.817

3.  Mechanical stability study of three techniques used in the fixation of transverse and oblique metaphyseal-diaphyseal junction fractures of the distal humerus in children: a finite element analysis.

Authors:  Chuang Liu; Allieu Kamara; Tianjing Liu; Yunhui Yan; Enbo Wang
Journal:  J Orthop Surg Res       Date:  2020-01-31       Impact factor: 2.359

4.  Supracondylar Humeral Fractures: An Audit of the Frequency of Bi-columnar Fixation and Intra-articular Wire Placement.

Authors:  Andrew Ker; Claire Murnaghan; James S Huntley
Journal:  Cureus       Date:  2018-03-13
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.