Literature DB >> 25694735

Application of foam-mat drying with egg white for carrageenan: drying rate and product quality aspects.

M Djaeni1, A Prasetyaningrum1, S B Sasongko1, W Widayat1, C L Hii2.   

Abstract

Drying is a significant step in the production of carrageenan. However, current drying process still deals with too long drying time and carrageenan quality degradation. The foam mat drying is an option to speed up drying process as well as retaining carrageenan quality. In this case, the carrageenan was mixed with egg white (albumin) as foaming agent and methyl cellulose for foam stabilizer. The foam will break the carrageenan gels and creates the porous structure resulting higher surface area for water transfer. This research studied the effect of egg white and methyl cellulose on carrageenan drying at various air temperature, and thickness. As a response, the water content versus time was observed and the drying rate was estimated. Meanwhile, the carrageenan texture was verified by X-RD (X-Ray Diffraction) and TEM (Transmission Electron Microscopy). Results showed that the presence of egg white stablized by methyl cellulose can speed up drying rate as well as retaining the crystalline structure of carrageenan. The higher albumin content, the faster drying rate. However, the addition of albumin and methyl cellulose restricted not more than 30 % in the mixture for keeping carrageenan quality and purity. By adding egg white 20 % and methyl cellulose 10 %, the water diffusion and drying rate can be two fold compared with carrageenan drying without foam. The improvement can be higher at the higher temperature and thinner carrageenan sheets.

Entities:  

Keywords:  Carrageenan; Drying rate; Egg white; Foam mat; Quality

Year:  2013        PMID: 25694735      PMCID: PMC4325039          DOI: 10.1007/s13197-013-1081-0

Source DB:  PubMed          Journal:  J Food Sci Technol        ISSN: 0022-1155            Impact factor:   2.701


  3 in total

1.  Effect of extraction parameters on the chemical structure and gel properties of kappa/iota-hybrid carrageenans obtained from Mastocarpus stellatus.

Authors:  L Hilliou; F D S Larotonda; P Abreu; A M Ramos; A M Sereno; M P Gonçalves
Journal:  Biomol Eng       Date:  2006-05-07

2.  Polysaccharides of the red algae.

Authors:  Anatolii I Usov
Journal:  Adv Carbohydr Chem Biochem       Date:  2011       Impact factor: 12.200

3.  Effect of drying on extruded pellets based on kappa-carrageenan.

Authors:  Markus Thommes; Wolfgang Blaschek; Peter Kleinebudde
Journal:  Eur J Pharm Sci       Date:  2007-03-06       Impact factor: 4.384

  3 in total
  4 in total

1.  Mathematical Models to Describe the Foam Mat Drying Process of Cumbeba Pulp (Tacinga inamoena) and Product Quality.

Authors:  Adelino de Melo Guimarães Diógenes; Rossana Maria Feitosa de Figueirêdo; Alexandre José de Melo Queiroz; João Paulo de Lima Ferreira; Wilton Pereira da Silva; Josivanda Palmeira Gomes; Francislaine Suelia Dos Santos; Deise Souza de Castro; Marcela Nobre de Oliveira; Dyego da Costa Santos; Romário Oliveira de Andrade; Ana Raquel Carmo de Lima
Journal:  Foods       Date:  2022-06-14

2.  Investigation of hot air and foam-mat dried cress seed gum by FT-IR, zeta potential, steady shear viscosity, dynamic oscillatory behavior, and other physical properties.

Authors:  Hannaneh Moniri; Reza Farahmandfar; Ali Motamedzadegan
Journal:  Food Sci Nutr       Date:  2020-03-13       Impact factor: 2.863

3.  Effect of foaming parameters on the physical and phytochemical properties of tomato powder.

Authors:  Eman Farid; Sabah Mounir; Eman Talaat; Sherif Elnemr; Hassan Siliha
Journal:  Food Sci Biotechnol       Date:  2022-07-02       Impact factor: 3.231

4.  Drying Rate and Product Quality Evaluation of Roselle (Hibiscus sabdariffa L.) Calyces Extract Dried with Foaming Agent under Different Temperatures.

Authors:  Mohamad Djaeni; Andri Cahyo Kumoro; Setia Budi Sasongko; Febiani Dwi Utari
Journal:  Int J Food Sci       Date:  2018-03-20
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.