[The influence of mixing and heating on the compressive strength of investment materials].

In the present study, the compressive strength of four representative dental investment materials was compared. The whole investigation was divided in three experiments. In the first one the effect of different ways of mixing on the compressive strength of the investments was examined. In the second the compressive strength of investments mixed mechanically under vacuum was compared: a) two hours after mixing, b) at the highest heating temperature and c) at room temperature after the heating procedure. In the third experiment, a comparison was made between the compressive strength of investments at the highest heating temperature. The investments were mixed mechanically under vacuum but half of the specimens were placed in a pressure device during setting. From the results obtained the following conclusions were made: a) Mixing mechanically under vacuum increases the compressive strength of the investments, b) the compressive strength of phosphate-bonded investments increases at the highest temperature of the heating procedure and c) the use of a pressure device during the setting of the investments results also in an increased compressive strength.