Emily R Batson1, Lyndon F Cooper2, Ibrahim Duqum3, Gustavo Mendonça3. 1. Former Resident, Department of Prosthodontics, University of North Carolina at Chapel Hill School of Dentistry, Private practice, Colorado Springs, Colo. Electronic address: drbatson@pickledental.com. 2. Director and Stallings Distinguished Professor, Graduate Prosthodontics, University of North Carolina at Chapel Hill School of Dentistry, Chapel Hill, NC. 3. Clinical Assistant Professor, Department of Prosthodontics, University of North Carolina at Chapel Hill School of Dentistry, Chapel Hill, NC.
Abstract
STATEMENT OF PROBLEM: Computer-aided design and computer-aided manufacturing (CAD/CAM) generated restorations are gaining popularity. However, limited clinical evidence is available for single-unit posterior CAD/CAM restorations fabricated with established and newer crown materials. PURPOSE: The purpose of this clinical study was to assess the restoration quality of and gingival response to CAD/CAM fabricated posterior single-tooth restorations with different processing technologies. MATERIAL AND METHODS:Twenty-two individuals in need of posterior complete coverage crowns were recruited under an institutional review board approved protocol. Teeth were randomized to 1 of 3 groups: metal ceramic, lithium disilicate, and monolithic zirconia. An unprepared or minimally restored tooth on the contralateral side was chosen as a control tooth for gingival measurements with each participant. Teeth were prepared and scanned intraorally by 1 of 3 experienced practitioners. A total of 32 restorations were digitally designed and fabricated with either milling technology or rapid-prototype printing and casting with conventional porcelain application. Restorations were evaluated with modified United States Public Health Service criteria for contour, marginal adaptation, occlusion, and shade. Gingival crevicular fluid volume and bleeding on probing were recorded preoperatively, at 1-month and 6-month postcementation visits. Polyvinyl siloxane impressions were made of the buccal margin of cemented restorations and evaluated with microcomputed tomography to assess marginal adaptation (horizontal discrepancy). The Mantel Haenszel row mean score was used to assess whether the crown systems differed with respect to the modified United States Public Health Service criteria. Linear mixed models were used to assess whether the average gingival volumes were affected by the explanatory variables (crown system, tooth status [treated vs control], or visit). A generalized estimating equation approach was used to assess whether bleeding on probing was affected by the explanatory variables. One-way ANOVA was used to assess marginal discrepancy values among the crown systems (α=.05 for all tests). RESULTS:Twelve metal ceramic, 10 lithium disilicate, and 10 zirconia restorations were fabricated for 22 participants. Zirconia restorations were significantly different from the other 2 crown systems (P<.001) with respect to occlusion. No occlusal adjustment was needed on 80% of the zirconia restorations. The average gingival crevicular fluid volumes did not differ among crown systems, between treated and control groups, or over time. The average horizontal marginal discrepancy was significantly different between lithium disilicate and zirconia crowns (P=.027), with zirconia crowns having the least amount of horizontal marginal discrepancy. CONCLUSIONS: Given the small sample size and limitations of this study, CAD/CAM-generated restorations for posterior teeth made from different materials had acceptable clinical results.
RCT Entities:
STATEMENT OF PROBLEM: Computer-aided design and computer-aided manufacturing (CAD/CAM) generated restorations are gaining popularity. However, limited clinical evidence is available for single-unit posterior CAD/CAM restorations fabricated with established and newer crown materials. PURPOSE: The purpose of this clinical study was to assess the restoration quality of and gingival response to CAD/CAM fabricated posterior single-tooth restorations with different processing technologies. MATERIAL AND METHODS: Twenty-two individuals in need of posterior complete coverage crowns were recruited under an institutional review board approved protocol. Teeth were randomized to 1 of 3 groups: metal ceramic, lithium disilicate, and monolithic zirconia. An unprepared or minimally restored tooth on the contralateral side was chosen as a control tooth for gingival measurements with each participant. Teeth were prepared and scanned intraorally by 1 of 3 experienced practitioners. A total of 32 restorations were digitally designed and fabricated with either milling technology or rapid-prototype printing and casting with conventional porcelain application. Restorations were evaluated with modified United States Public Health Service criteria for contour, marginal adaptation, occlusion, and shade. Gingival crevicular fluid volume and bleeding on probing were recorded preoperatively, at 1-month and 6-month postcementation visits. Polyvinyl siloxane impressions were made of the buccal margin of cemented restorations and evaluated with microcomputed tomography to assess marginal adaptation (horizontal discrepancy). The Mantel Haenszel row mean score was used to assess whether the crown systems differed with respect to the modified United States Public Health Service criteria. Linear mixed models were used to assess whether the average gingival volumes were affected by the explanatory variables (crown system, tooth status [treated vs control], or visit). A generalized estimating equation approach was used to assess whether bleeding on probing was affected by the explanatory variables. One-way ANOVA was used to assess marginal discrepancy values among the crown systems (α=.05 for all tests). RESULTS: Twelve metal ceramic, 10 lithium disilicate, and 10 zirconia restorations were fabricated for 22 participants. Zirconia restorations were significantly different from the other 2 crown systems (P<.001) with respect to occlusion. No occlusal adjustment was needed on 80% of the zirconia restorations. The average gingival crevicular fluid volumes did not differ among crown systems, between treated and control groups, or over time. The average horizontal marginal discrepancy was significantly different between lithium disilicate and zirconia crowns (P=.027), with zirconia crowns having the least amount of horizontal marginal discrepancy. CONCLUSIONS: Given the small sample size and limitations of this study, CAD/CAM-generated restorations for posterior teeth made from different materials had acceptable clinical results.
Authors: Marina R Kaizer; Petra C Gierthmuehlen; Mateus Bf Dos Santos; Sergio S Cava; Yu Zhang Journal: Ceram Int Date: 2017-05-19 Impact factor: 4.527
Authors: Kristina E Goryainova; Egor S Morokov; Marina V Retinskaja; Fedor S Rusanov; Samvel V Apresyan; Igor Yu Lebedenko Journal: Open Dent J Date: 2018-01-31