Literature DB >> 24593718

Multi-institutional dosimetric and geometric commissioning of image-guided small animal irradiators.

P E Lindsay1, P V Granton2, A Gasparini3, S Jelveh4, R Clarkson5, S van Hoof2, J Hermans2, J Kaas6, F Wittkamper6, J-J Sonke6, F Verhaegen7, D A Jaffray8.   

Abstract

PURPOSE: To compare the dosimetric and geometric properties of a commercial x-ray based image-guided small animal irradiation system, installed at three institutions and to establish a complete and broadly accessible commissioning procedure.
METHODS: The system consists of a 225 kVp x-ray tube with fixed field size collimators ranging from 1 to 44 mm equivalent diameter. The x-ray tube is mounted opposite a flat-panel imaging detector, on a C-arm gantry with 360° coplanar rotation. Each institution performed a full commissioning of their system, including half-value layer, absolute dosimetry, relative dosimetry (profiles, percent depth dose, and relative output factors), and characterization of the system geometry and mechanical flex of the x-ray tube and detector. Dosimetric measurements were made using Farmer-type ionization chambers, small volume air and liquid ionization chambers, and radiochromic film. The results between the three institutions were compared.
RESULTS: At 225 kVp, with 0.3 mm Cu added filtration, the first half value layer ranged from 0.9 to 1.0 mm Cu. The dose-rate in-air for a 40 × 40 mm(2) field size, at a source-to-axis distance of 30 cm, ranged from 3.5 to 3.9 Gy/min between the three institutions. For field sizes between 2.5 mm diameter and 40 × 40 mm(2), the differences between percent depth dose curves up to depths of 3.5 cm were between 1% and 4% on average, with the maximum difference being 7%. The profiles agreed very well for fields >5 mm diameter. The relative output factors differed by up to 6% for fields larger than 10 mm diameter, but differed by up to 49% for fields ≤5 mm diameter. The mechanical characteristics of the system (source-to-axis and source-to-detector distances) were consistent between all three institutions. There were substantial differences in the flex of each system.
CONCLUSIONS: With the exception of the half-value layer, and mechanical properties, there were significant differences between the dosimetric and geometric properties of the three systems. This underscores the need for careful commissioning of each individual system for use in radiobiological experiments.

Entities:  

Mesh:

Year:  2014        PMID: 24593718     DOI: 10.1118/1.4866215

Source DB:  PubMed          Journal:  Med Phys        ISSN: 0094-2405            Impact factor:   4.071


  14 in total

1.  The potential impact of ultrathin filter design on dosimetry and relative biological effectiveness in modern image-guided small animal irradiators.

Authors:  Yannick Poirier; Christopher Daniel Johnstone; Charles Kirkby
Journal:  Br J Radiol       Date:  2018-11-15       Impact factor: 3.039

2.  Characterization of a scintillating fibre detector for small animal imaging and irradiation dosimetry.

Authors:  Coralie Le Deroff; Anne-Marie Frelin-Labalme; Xavier Ledoux
Journal:  Br J Radiol       Date:  2016-09-16       Impact factor: 3.039

3.  An orthotopic non-small cell lung cancer model for image-guided small animal radiotherapy platforms.

Authors:  Venus Sosa Iglesias; Stefan J van Hoof; Ana Vaniqui; Lotte Ejr Schyns; Natasja Lieuwes; Ala Yaromina; Linda Spiegelberg; Arjan J Groot; Frank Verhaegen; Jan Theys; Ludwig Dubois; Marc Vooijs
Journal:  Br J Radiol       Date:  2018-11-30       Impact factor: 3.039

4.  Adaptation, Commissioning, and Evaluation of a 3D Treatment Planning System for High-Resolution Small-Animal Irradiation.

Authors:  Jeho Jeong; Qing Chen; Robert Febo; Jie Yang; Hai Pham; Jian-Ping Xiong; Pat B Zanzonico; Joseph O Deasy; John L Humm; Gig S Mageras
Journal:  Technol Cancer Res Treat       Date:  2015-05-06

5.  Proposal for a Simple and Efficient Monthly Quality Management Program Assessing the Consistency of Robotic Image-Guided Small Animal Radiation Systems.

Authors:  N Patrik Brodin; Chandan Guha; Wolfgang A Tomé
Journal:  Health Phys       Date:  2015-11       Impact factor: 1.316

6.  Investigating the accuracy of microstereotactic-body-radiotherapy utilizing anatomically accurate 3D printed rodent-morphic dosimeters.

Authors:  Steven T Bache; Titania Juang; Matthew D Belley; Bridget F Koontz; John Adamovics; Terry T Yoshizumi; David G Kirsch; Mark Oldham
Journal:  Med Phys       Date:  2015-02       Impact factor: 4.071

Review 7.  Tumour and normal tissue radiobiology in mouse models: how close are mice to mini-humans?

Authors:  Bridget F Koontz; Frank Verhaegen; Dirk De Ruysscher
Journal:  Br J Radiol       Date:  2016-09-26       Impact factor: 3.039

8.  Application of radiochromic gel dosimetry to commissioning of a megavoltage research linear accelerator for small-field animal irradiation studies.

Authors:  Noora Ba Sunbul; Ibrahim Oraiqat; Benjamin Rosen; Cameron Miller; Christopher Meert; Martha M Matuszak; Shaun Clarke; Sara Pozzi; Jean M Moran; Issam El Naqa
Journal:  Med Phys       Date:  2021-02-06       Impact factor: 4.071

9.  Small Animal IMRT Using 3D-Printed Compensators.

Authors:  Gage Redler; Erik Pearson; Xinmin Liu; Inna Gertsenshteyn; Boris Epel; Charles Pelizzari; Bulent Aydogan; Ralph Weichselbaum; Howard J Halpern; Rodney D Wiersma
Journal:  Int J Radiat Oncol Biol Phys       Date:  2020-12-26       Impact factor: 8.013

10.  Characterization of an orthovoltage biological irradiator used for radiobiological research.

Authors:  Rezvan Azimi; Parham Alaei; Emiliano Spezi; Susanta K Hui
Journal:  J Radiat Res       Date:  2015-02-17       Impact factor: 2.724

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.