Sang V Le1, Bryan Conrad1, Thomas W Wright2. 1. Department of Orthopaedics and Rehabilitation, University of Florida, Gainesville, FL, USA. 2. Department of Orthopaedics and Rehabilitation, University of Florida, Gainesville, FL, USA. Electronic address: wrightw@ortho.ufl.edu.
Abstract
BACKGROUND: Glenoid resurfacing can be a challenging component of total shoulder arthroplasty when significant glenoid retroversion or deformity is present. The purpose of this study was to determine whether a newly designed glenoid-targeting guide using the parallel relationship between glenoid version and an anatomic fulcrum axis could accurately estimate the central axis of the scapula. MATERIALS AND METHODS: Three orthopaedic surgeons used a newly designed glenoid-targeting guide to place a guide pin into 6 normal Sawbones scapulae (Pacific Research Laboratories, Vashon Island, WA, USA), 6 retroverted Sawbones scapulae, 8 cadaveric scapular specimens, and 5 cadaveric shoulder specimens. Angles of deviation from the central scapular axis and from perpendicular to the fulcrum axis were measured. RESULTS: The mean pin deviation angle from the central scapular axis and the mean fulcrum deviation angle for the normal Sawbones scapulae were 1.7° (SD, 1.2°) and 2.1° (SD, 1.5°), respectively. For altered retroverted Sawbones scapulae, the mean deviation angles were 1.8° (SD, 1.2°) and 2.8° (SD, 1.6°), respectively. The combined mean pin deviation angle and mean fulcrum deviation angle for cadaveric shoulder specimens were 2.8° (SD, 3.3°) and 2.3° (SD, 2.3°), respectively. The surgeons' results did not differ significantly whether using Sawbones models, cadaveric scapular specimens, or cadaveric shoulder specimens. CONCLUSION: A glenoid-targeting guide based on the relationship of the fulcrum axis and glenoid version can be used to accurately estimate the central scapular axis. Such a tool can be accurate and reliable intraoperatively, aiding in glenoid component placement to within 5° of ideal version, irrespective of glenoid deformity.
BACKGROUND: Glenoid resurfacing can be a challenging component of total shoulder arthroplasty when significant glenoid retroversion or deformity is present. The purpose of this study was to determine whether a newly designed glenoid-targeting guide using the parallel relationship between glenoid version and an anatomic fulcrum axis could accurately estimate the central axis of the scapula. MATERIALS AND METHODS: Three orthopaedic surgeons used a newly designed glenoid-targeting guide to place a guide pin into 6 normal Sawbones scapulae (Pacific Research Laboratories, Vashon Island, WA, USA), 6 retroverted Sawbones scapulae, 8 cadaveric scapular specimens, and 5 cadaveric shoulder specimens. Angles of deviation from the central scapular axis and from perpendicular to the fulcrum axis were measured. RESULTS: The mean pin deviation angle from the central scapular axis and the mean fulcrum deviation angle for the normal Sawbones scapulae were 1.7° (SD, 1.2°) and 2.1° (SD, 1.5°), respectively. For altered retroverted Sawbones scapulae, the mean deviation angles were 1.8° (SD, 1.2°) and 2.8° (SD, 1.6°), respectively. The combined mean pin deviation angle and mean fulcrum deviation angle for cadaveric shoulder specimens were 2.8° (SD, 3.3°) and 2.3° (SD, 2.3°), respectively. The surgeons' results did not differ significantly whether using Sawbones models, cadaveric scapular specimens, or cadaveric shoulder specimens. CONCLUSION: A glenoid-targeting guide based on the relationship of the fulcrum axis and glenoid version can be used to accurately estimate the central scapular axis. Such a tool can be accurate and reliable intraoperatively, aiding in glenoid component placement to within 5° of ideal version, irrespective of glenoid deformity.