Literature DB >> 24224793

Graphene blisters with switchable shapes controlled by pressure and adhesion.

Narasimha G Boddeti1, Xinghui Liu, Rong Long, Jianliang Xiao, J Scott Bunch, Martin L Dunn.   

Abstract

We created graphene blisters that cover and seal an annular cylinder-shaped microcavity in a SiO2 substrate filled with a gas. By controlling the pressure difference between the gas inside and outside of the microcavity, we switch the graphene membrane between multiple stable equilibrium configurations. We carried out experiments starting from the situation where the pressure of the gas inside and outside of the microcavity is set equal to a prescribed charging pressure, p0 and the graphene membrane covers the cavity like an annular drum, adhered to the central post and the surrounding substrate due to van der Waals forces. We decrease the outside pressure to a value, pe which causes it to bulge into an annular blister. We systematically increase the charging pressure by repeating this procedure causing the annular blister to continue to bulge until a critical charging pressure pc(i) is reached. At this point the graphene membrane delaminates from the post in an unstable manner, resulting in a switch of graphene membrane shape from an annular to a spherical blister. Continued increase of the charging pressure results in the spherical blister growing with its height increasing, but maintaining a constant radius until a second critical charging pressure pc(o) is reached at which point the blister begins to delaminate from the periphery of the cavity in a stable manner. Here, we report a series of experiments as well as a mechanics and thermodynamic model that demonstrate how the interplay among system parameters (geometry, graphene stiffness (number of layers), pressure, and adhesion energy) results in the ability to controllably switch graphene blisters among different shapes. Arrays of these blisters can be envisioned to create pressure-switchable surface properties where the difference between patterns of annular versus spherical blisters will impact functionalities such as wettability, friction, adhesion, and surface wave characteristics.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 24224793     DOI: 10.1021/nl4036324

Source DB:  PubMed          Journal:  Nano Lett        ISSN: 1530-6984            Impact factor:   11.189


  5 in total

1.  Mechanics of spontaneously formed nanoblisters trapped by transferred 2D crystals.

Authors:  Daniel A Sanchez; Zhaohe Dai; Peng Wang; Arturo Cantu-Chavez; Christopher J Brennan; Rui Huang; Nanshu Lu
Journal:  Proc Natl Acad Sci U S A       Date:  2018-07-13       Impact factor: 11.205

2.  Atomic intercalation to measure adhesion of graphene on graphite.

Authors:  Jun Wang; Dan C Sorescu; Seokmin Jeon; Alexei Belianinov; Sergei V Kalinin; Arthur P Baddorf; Petro Maksymovych
Journal:  Nat Commun       Date:  2016-10-31       Impact factor: 14.919

3.  Adhesion toughness of multilayer graphene films.

Authors:  Joseph D Wood; Christopher M Harvey; Simon Wang
Journal:  Nat Commun       Date:  2017-12-05       Impact factor: 14.919

4.  Isolating hydrogen in hexagonal boron nitride bubbles by a plasma treatment.

Authors:  Li He; Huishan Wang; Lingxiu Chen; Xiujun Wang; Hong Xie; Chengxin Jiang; Chen Li; Kenan Elibol; Jannik Meyer; Kenji Watanabe; Takashi Taniguchi; Zhangting Wu; Wenhui Wang; Zhenhua Ni; Xiangshui Miao; Chi Zhang; Daoli Zhang; Haomin Wang; Xiaoming Xie
Journal:  Nat Commun       Date:  2019-06-27       Impact factor: 14.919

5.  Optically Forged Diffraction-Unlimited Ripples in Graphene.

Authors:  Pekka Koskinen; Karoliina Karppinen; Pasi Myllyperkiö; Vesa-Matti Hiltunen; Andreas Johansson; Mika Pettersson
Journal:  J Phys Chem Lett       Date:  2018-10-15       Impact factor: 6.475

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.