A search for varying fundamental constants using hertz-level frequency measurements of cold CH molecules.

Many modern theories predict that the fundamental constants depend on time, position or the local density of matter. Here we develop a spectroscopic method for pulsed beams of cold molecules, and use it to measure the frequencies of microwave transitions in CH with accuracy down to 3 Hz. By comparing these frequencies with those measured from sources of CH in the Milky Way, we test the hypothesis that fundamental constants may differ between the high- and low-density environments of the Earth and the interstellar medium. For the fine structure constant we find Δα/α=(0.3 ± 1.1) × 10⁻⁷, the strongest limit to date on such a variation of α. For the electron-to-proton mass ratio we find Δμ/μ=(-0.7 ± 2.2) × 10⁻⁷. We suggest how dedicated astrophysical measurements can improve these constraints further and can also constrain temporal variation of the constants.

In the Standard Model of particle physics, the fundamental constants are fixed parameters, but in many extensions of the standard model they may change12. In higher-dimensional theories for example, which aim at a unified description of gravity and the other forces, the constants depend on the size of the compactified extra dimensions. Their size may be changing in a conceptually similar way to the observed expansion of the Universe, causing the constants to change with position or time. Some theories of dark energy also predict a variation of the constants. These theories hypothesize that a scalar field is responsible for the observed cosmic acceleration. In chameleon models, this field acquires an effective mass that depends strongly on the local matter density34. In our high-density environment, the field has such a short range that it goes undetected in tests of the equivalence principle and searches for fifth forces. In these models, particle masses and coupling constants may also depend on matter density5. Given the potential role of these theories in answering outstanding questions in physics, it is important to test the prediction of varying constants.

Atomic and molecular transition frequencies provide a natural way to look for variation of the fine structure constant, α, and the electron–proton mass ratio, μ. Their present-day time derivatives are strongly constrained by comparisons of atomic clocks67, while observations of high red-shift objects test changes on cosmological scales. Some analyses of optical absorption spectra at high red-shifts suggest a variation of α across the Universe8, but others find no variation at the level of a few parts-per-million910. High red-shift measurements using microwave and mm-wave molecular transitions, which can be far more sensitive to changes in the constants than optical transitions, give null results for Δα/α at levels between 8 and 0.8 parts-per-million11121314. For Δμ/μ, a recent study of methanol absorption lines at high red-shift found no variation at the 0.1 parts-per-million level15.

Measurements within our galaxy test whether constants depend on the local density. For changes in α with matter density the 1σ limit is |Δα/α|<2 × 10−7 (ref. 16). For changes in μ a study of methanol maser lines sets a 1σ upper limit, |Δμ/μ|<2.9 × 10−8 (ref. 17). However, Levshakov et al.1819, comparing terrestrial and astrophysical microwave transitions in ammonia and other molecules, find an eight-standard-deviation systematic difference. This suggests a fractional change in μ of 2.6 × 10−8 when going from the earth to the interstellar medium, tentatively supporting the chameleon hypothesis. This intriguing situation calls out for new, high-precision measurements of the most sensitive molecular transition frequencies and for higher-quality astronomical observations.

Here, we measure the frequencies of the 3.3 and 0.7 GHz Λ-doublet transitions of CH, which are very sensitive to changes in α and μ (refs 20, 21). With these measurements and existing astronomical observations of CH in the interstellar medium, we constrain variation of the constants in our Galaxy, and open the way for future radio-astronomy measurements of higher accuracy to test more stringently whether the constants vary. Our spectroscopic method has Hz-level accuracy, and takes advantage of the short pulse duration and small velocity spread of cold molecular beams to control the interaction between molecules and an applied microwave field. This method can also be applied to other molecules of interest in chemical physics, metrology, particle physics and cosmology2223242526.

Results

The CH molecule

Figure 1 shows the relevant energy levels in the ground electronic and vibrational state of CH, X2Π(v=0). These eigenstates of the Hamiltonian are also eigenstates of the parity operator, P, and of the squared total angular momentum operator, F2. In addition, they are approximate eigenstates of N2 and J2, where J=N+S and N=L+R. Here, S and L are the electronic spin and orbital angular momentum operators, and R is the rotational angular momentum operator. The spin–orbit interaction splits the N=1 level into a pair of levels labelled by J=1/2 and J=3/2. Each is split by a Coriolis interaction into a Λ-doublet whose components are the parity eigenstates, |p=±1=|Λ=+1±(−1)|Λ=−1, where Λ is the quantum number for the projection of L onto the internuclear axis. It is these Λ-doublet frequencies that we measure. The interaction with the hydrogen nuclear spin, I=1/2, produces a hyperfine structure in each of the Λ-doublet components. The levels are labelled as (J, F).

Figure 1

Relevant energy levels in CH.

Approximate frequencies are given in MHz and the sensitivity coefficients for the two Λ-doublet transitions are shown.

These two Λ-doublet transitions have been observed towards numerous clouds in the interstellar medium27282930313233343536, and the 3.3-GHz transition has also been observed in other galaxies3738. Figure 1 gives the sensitivity coefficients of the transitions to changes in the constants, K and K (refs 20, 21), defined such that the rest frequency emitted by molecules in the astronomical source is ωlab (1+KΔα/α+KΔμ/μ), where ωlab is the laboratory frequency. As these coefficients are large and different, a very sensitive test is possible when the transitions are observed together in the same gas. Until now, this test was hindered by a lack of precise laboratory frequencies.

Frequency measurements

Using the apparatus shown in Fig. 2, we measure the laboratory frequencies by the Ramsey method of separated oscillating fields3940. The source produces short, cold pulses of CH molecules that pass through a state selector, a transmission line resonator and then a detector. The state selector preferentially populates one of the two parity eigenstates of the Λ-doublet being measured. Inside the transmission line resonator the molecules interact with a standing-wave microwave field. A first microwave pulse (a π/2 pulse), of duration τ=15 μs and angular frequency ω, is applied when the molecules are at antinode m1 of the field. This prepares an equal superposition of the two Λ-doublet components, which then evolves freely for a time T at the angular frequency ω0, developing a phase difference of δT relative to the microwave oscillator, where δ=(ω−ω0). We choose the free evolution time to be T=mλ/(2v0)−τ, where v0 is the mean speed, λ is the wavelength in the transmission line and m is an integer, so that the molecules are now at antinode m1+m. A second microwave pulse of equal duration and amplitude then completes the population transfer with a probability

Figure 2

Experimental setup for measuring the Λ-doublet frequencies.

A supersonic CH beam is produced by photo-dissociation of CHBr3. The initial state is selected either by optical pumping (for J=1/2) or by driving the (1/2−)−(3/2+) transition with a mm-wave beam (for J=3/2). The molecules travel through a microwave transmission line where the Λ-doublet transitions are driven, and are finally detected by laser induced fluorescence. Not to scale.

Here, and β represents a possible phase shift of the microwave field (modulo 2π) because of the change in position of the molecules between the two pulses. The population in one of the parity states is measured, as a function of ω, by time-resolved laser-induced fluorescence. From the time-of-flight profile we select molecules with arrival times in the range t0±δt, where t0 is the most probable arrival time, and δt≃0.02t0. This ensures that all molecules used in the analysis are sufficiently well localized near the antinodes when the pulses are applied.

Figure 3a shows data measured over a wide frequency range around the (1/2+,1)–(1/2−,1) resonance. The line is a fit to the model b+aP(δ), where b and a are constants and P(δ) is given by equation (1). We set β=0, and τ and T to the values used in the experiment, leaving only the offset b, the amplitude a (which is negative when m is odd) and the resonance angular frequency ω0 as fit parameters. The model fits the data well and we use it to determine ω0. Figure 3b shows narrower frequency scans for the same transition and for three different values of T chosen to make m=4, 5 and 6. Here, as in all our data, we see no dependence of ω0 on m, so we average together measurements taken using different values of m. We also see no variation of ω0 when we subdivide the data according to the arrival time of the molecules.

Figure 3

Ramsey interference data.

Dots: measured population in (1/2−, 1) as a function of the microwave frequency using the method of separated oscillating fields. Line: fit to the data using the model discussed in the text. (a) Wide frequency scan with a free evolution time of T=443 μs. (b) Narrower frequency scans for three different free evolution times. Green: 458 μs. Blue: 380 μs. Red: 302 μs.

Our model assumes that β is zero, as for a perfect standing wave. As the standing wave is not perfect, β is not exactly zero and there will be a systematic frequency shift of δf=β/(2πT). Let the amplitudes of the two counter-propagating waves be proportional to (1±Δ), so that Δ is the amplitude imbalance between them. The microwave electric field is

where A is an amplitude, k=2π/λ and (modulo π)

When Δ is small, ϕ changes very slowly around the antinodes. Suppose the first pulse starts when the molecules are at z1=z0+δz0, where z0 is the position of an antinode, and the second pulse starts when the molecules are at z2=z1+(1+∈)mλ/2. Expanding the trigonometric functions for small displacements around the antinodes (that is, δz0<<λ, ∈<<1), gives δf≃Δ∈(v0/λ), independent of δz0 to first order. For the J=1/2 measurement, taking Δ=0.1 and ∈=0.05 (see Methods), we would expect a velocity-dependent frequency shift of 0.06 Hz (m s−1)−1.

A second systematic frequency shift is expected because of the motion of the molecules during the two short π/2 pulses. Including the Doppler shift in the expression for the lineshape in the case of perfect π/2 pulses and expanding about the resonance frequency, we find that a travelling wave results in the systematic frequency shift δf=(1−4/π)(v0/λ)(τ/T). For the counter-propagating waves this is further reduced by the imbalance factor Δ. For the J=1/2 measurement, with Δ=0.1, τ=15 μs and T=450 μs, we expect a shift of−0.01 Hz (m s−1)−1.

We control these and any other velocity-dependent shifts, by measuring all the frequencies for at least three different values of v0. We find that the measured frequencies shift linearly with v0, and that the gradient, df/dv0, differs for different values of m1. The largest gradients we measure are 0.07±0.01 Hz (m s−1)−1 for the J=1/2 measurement, and 0.03±0.01 Hz (m s−1)−1 for the J=3/2 measurement. After extrapolating to zero velocity the results for different values of m1 all agree, so we take the weighted mean of the zero-velocity values as the final frequency. This procedure does not rely on a knowledge of Δ.

To minimize systematic shifts due to magnetic fields, the interaction region is magnetically shielded. For a linearly polarized microwave field and a small magnetic field, there is a symmetry in the shifts and amplitudes of the Zeeman subcomponents, and therefore no systematic shift. Circular polarization components of the microwave field are strongly suppressed inside the transmission line. For the J=1/2 level the spin and orbital angular momentum contributions to the magnetic moment very nearly cancel, so Zeeman shifts are small. For example, the shift of the MF=+1 component of the (1/2+,1) level is approximately 0.01 Hz nT−1. For the J=3/2 level the Zeeman shifts are far greater, 15.1MF Hz nT−1 for F=1 and 9.07MF Hz nT−1 for F=2. To measure the residual field in the interaction region, we applied single 780-μs-long pulses to molecules moving at 570 m s−1, and measured the Zeeman splittings of the J=3/2 levels as a function of applied magnetic field in all three directions. Reversal of the applied field measures the residual field in that direction, averaged over the interaction region. We also look for any broadening of the single-pulse lineshape at zero applied field. The residual fields are consistent with zero in all three directions, with upper limits of 3, 56 and 25 nT along x, y and z, respectively. To measure the size of magnetic-field related shifts in the Ramsey data, we apply small homogeneous fields in each direction. For the J=1/2 transitions, we observe no significant shift at the 1 Hz level, even for fields as large as 50 μT. For the J=3/2, ΔF=0 transitions, the field-induced frequency shifts are all smaller than 0.04 Hz nT−1. Multiplying this by the largest upper limit to the field gives a systematic uncertainty of 2 Hz. For the J=3/2, ΔF=1 transitions, we could not rule out gradients as large as 0.1 Hz nT−1 for x, 0.2 Hz nT−1 for y and 0.05 Hz nT−1 for z. Multiplying these by the upper limits to the residual field gives a systematic uncertainty of 11 Hz for these transitions.

We measured the Stark shift of the J=1/2 transition by applying electric fields up to 20 V cm−1 between the plates of the transmission line. Measuring the change in this shift upon reversing the applied field sets an upper limit to uncontrolled Stark shifts of 0.1 Hz. We checked for systematic shifts depending on microwave power or probe laser detuning, but these were negligible. Frequency shifts due to collisions in the beam, spurious frequency sidebands, blackbody radiation41, the motional Stark shift and the second-order Doppler shift are all negligible at the current accuracy level of 10−9.

Table 1 shows our measured frequencies along with their uncertainties, which are obtained by adding the statistical and systematic uncertainties in quadrature. The systematic uncertainty is negligible for all but the last two, where it is 11 Hz. The three J=1/2 measurements are consistent with the previous best laboratory42 and astrophysical3031 measurements, and are 300 times more precise than these. We know of no previous laboratory measurements of the J=3/2 frequencies. There are astrophysical measurements of the first two J=3/2 transitions in the table36, and our results are consistent with these and about 300 times more precise.

Table 1

Measured Λ-doublet frequencies with 1 uncertainties.

Transition	Frequency (Hz)
(1/2+,1)−(1/2−,1)	3,335,479,356±3
(1/2+,0)−(1/2−,1)	3,349,192,556±3
(1/2+,1)−(1/2−,0)	3,263,793,447±3
(3/2+,2)−(3/2−,2)	701,677,682±6
(3/2+,1)−(3/2−,1)	724,788,315±16
(3/2+,1)−(3/2−,2)	703,978,340±21
(3/2+,2)−(3/2−,1)	722,487,624±16

Levels are labelled with the notation (J, F).

Constraining changes of α and μ in the Milky Way

With these new measurements and existing astronomical data, we can set useful bounds on the possible variations of α and μ with matter density. We study five interstellar sources where the density is typically 1019 times smaller than on Earth. It is necessary to compare two spectral lines from each source, so that the Doppler shift can be removed, and for high sensitivity to changes in the constants these two should have very different sensitivity coefficients. In one of the sources the J=1/2 and J=3/2 Λ-doublet transitions of CH are observed together, and in the other four the J=1/2 CH transition is observed together with the ground state Λ-doublet transition of OH. Astronomical spectra are plotted on a velocity scale that is determined from the Doppler shift of the received radiation. For each selected source the spectral lines are narrow and have similar shapes, and we assume that the molecules producing them have the same velocities. To obtain our bounds, we assume that there is either a change in α or μ, but not in both (this is a limitation of our analysis). Then, the fractional change in α is

with a similar equation for the change in μ. Here, Δv12=v(1)−v(2) is the difference between the measured velocities of lines 1 and 2 and is determined from the published spectra, is the sensitivity coefficient for transition i, is the frequency measured in the laboratory and is the frequency used to define the velocity scale in the astronomical measurement. This is usually the accepted value for the transition frequency at the time of the measurement, is specified along with the published spectra, and carries no uncertainty. The laboratory measurements presented here allow the second term in square brackets to be determined to high accuracy, so the uncertainty in Δα/α is now entirely due to the uncertainty in Δv12.

Table 2 shows the results obtained from the five selected interstellar sources. We find the central velocities by fitting Gaussian profiles to the spectral lines. Where there are multiple velocity components, we fit multiple Gaussians. In each source there are multiple velocity components and/or multiple hyperfine components, so we obtain several different values for the velocity difference. Their standard deviation is typically several times the individual uncertainties of the fits, probably because the underlying velocity distributions are not Gaussian. For each source, we use the mean and standard deviation of the individual results to give a central value and uncertainty for Δv12. The angular size of the observed part of the source (the beam size) is often different for the two species. This can result in systematic velocity differences. This is not significant for CasA or W51, where the sources are smaller or comparable in size to the smallest beam size used. Neither is it significant for Heiles cloud 2 or L134N, because the beam size used for the CH and OH observations were nearly the same, and maps of these clouds show that velocity variation is less than 0.2 km s−1 over a much wider angular scale than this beam size30. For the observations of RCW 36, which is an extended source, the beam size for OH was twice that for CH. However, maps of this cloud44 show that the observed region is centred on an intense localized clump whose size is approximately the OH beam size, and that any systematic velocity differences due to different beam sizes will be smaller than our quoted uncertainty.

Table 2

Analysis of astronomical data.

Source	Transition 1	Transition 2	v (km s−1)	Δv12 (km s−1)	Δv′12 (km s−1)	(10−7)	(10−7)	Ref.
G111.7−2.1(CasA)	CH(3264, 3335, 3349)	OH(1667)	−1.4, 0	−0.01 (0.09)	−0.08 (0.11)	1.5 (2.0)	−3.1 (4.1)	30,32
G265.1+1.5(RCW36)	CH(3264, 3335)	OH(1612, 1665, 1667, 1721)	6.8	0.06 (0.19)	0.04 (0.16)	0.9 (3.1)	1.9 (6.4)	34
G174.3−13.4(Heiles2)	CH(3264, 3335, 3349)	OH(1612, 1665, 1667, 1721)	5.8	0.00 (0.19)	−0.02 (0.19)	0.6 (3.6)	−1.2 (7.4)	32,43
G6.0+36.7(L134N)	CH(3264, 3335, 3349)	OH(1665, 1667)	2.5	0.05 (0.13)	−0.12 (0.13)	2.3 (2.4)	−4.8 (5.0)	32,43
G49.5−0.4(W51)	CH(702)	CH(3264, 3335, 3349)	65	−0.85 (0.53)	−0.48 (0.55)	−1.8 (2.0)	3.6 (4.1)	36

The columns are: the direction of the source, the transitions used (labelled by the frequencies of the hyperfine components in MHz), the velocity component(s) used, the measured velocity difference, the velocity difference corrected for any differences between the nominal and laboratory frequencies, the derived values of Δα/α and Δμ/μ, the references where the spectra are given. 1σ uncertainties are given in parentheses.

Using Δv12, the measured values of for CH and OH45 and the quoted values of , we calculate the quantity in square brackets in equation (4), which we label as Δv′12 in Table 2. From these, and the calculated sensitivity coefficients for OH (ref. 20) and CH (ref. 21), we find values for Δα/α and Δμ/μ. Taking the weighted mean of their values, we arrive at the results Δα/α=(0.3±1.1) × 10−7 and Δμ/μ=(−0.7±2.2) × 10−7, giving us 1σ upper bounds of |Δα/α|<1.4 × 10−7 and |Δμ/μ|<2.9 × 10−7.

Discussion

Our analysis demonstrates the high sensitivity of this method. With dedicated astronomical measurements, far higher precision could be reached and the study could be extended to sources at high red-shift. The scope is particularly great for studying sources where the 3.3 and 0.7 GHz transitions are observed simultaneously. There is currently a shortage of such data, and the comparison provides excellent sensitivity to variation of the constants and is relatively immune to systematic shifts that can arise when analysing transitions in different species. The relatively low intensity of the CH lines requires the use of large telescopes, but there are several that are suitable. The 100-m telescope of the Max-Planck-Gesellschaft covers the entire frequency range between the two Λ-doublets, whereas the 100-m Green Bank Telescope covers the frequency range from 0.29 to 2.6 GHz and so is suitable for measuring both transitions at moderate red-shifts. For a higher collecting surface, the 300-m telescope at Arecibo can be used. It covers frequencies from 3.3 GHz down to 1.225 GHz and selected frequency bands between 690 and 312 MHz, so could be used to study both transitions over a wide range of red-shifts. In a few years, even higher sensitivity will be provided by a new 500 m telescope being built in the Guizhou province of China. To circumvent problems of rf interference, interferometric measurements are efficient. The Very Large Array provides such measurements with high sensitivity and currently covers all frequencies between 1 and 3.3 GHz. Looking further ahead, the Square Kilometre Array, to be constructed in South Africa and Australia, will provide unprecedented sensitivity. Being an interferometric facility located in areas of low interference, this telescope should be able to measure the two Λ-doublets of CH in a large number of interstellar clouds, both at low and high red-shift. With a reasonable precision of 0.1 km s−1 in the measurement of Δv12, and a modest dataset, it will be possible to reach below the 10−8 level for both Δα/α and Δμ/μ. The laboratory frequencies are now so accurate that their uncertainties are unlikely to be a limiting factor in any future measurements.

Methods

The setup for measuring the frequencies is shown in Fig. 2. A pulsed supersonic beam of CH radicals, with a repetition rate of 10 Hz, is produced by photo-dissociation of CHBr3 (96% purity stabilized in ethanol) in a 4-bar carrier gas of either He, Ne, Ar or Kr (refs 46, 47). The measured mean speeds of CH for each of these carrier gases are v0=1710, 810, 570 and 420 m s−1, and the translational temperature is typically 0.4–0.5 K. About 95% of the molecules are formed in the J=1/2 state. The mixture, formed by bubbling the carrier gas through liquid bromoform, expands through the 1-mm-diameter nozzle of a pulsed solenoid valve into the vacuum chamber. The light from the photo-dissociation laser (220 mJ, 20 ns, 248 nm) is focused in front of the nozzle to a spot 1 mm high (along y) and 4 mm wide (along z).

At z=86 mm, the molecules pass through a 2-mm-diameter skimmer and enter the second chamber, where the pressure is below 10−7 mbar. They pass through the state selector and transmission line resonator described below, and are then detected at z=780 mm by driving the A2Δ(v=0)←X2Π(v=0) transition with a laser and imaging the resulting fluorescence onto a photomultiplier tube. In this way, the time-of-flight profile of each molecular pulse is recorded with a temporal resolution of about 5 μs. The probe laser beam comes from a frequency-doubled continuous-wave titanium-sapphire laser. The beam propagates along x, is linearly polarized along z, has a wavelength near 430.15 nm and has a power of 5 mW in a rectangular-shaped beam, 4 mm high and 1.4 mm wide. We measure the population in the (1/2−, F) levels for the J=1/2 measurement and in the (3/2+, F) levels for the J=3/2 measurement, by driving the transitions to the J=3/2 and J=5/2 levels of A2Δ(v=0, N=2). The frequencies of these transitions, which are labelled R22ff(1/2) and R11ff(3/2), are given in ref. 48. The CH density at the detector is approximately 106 cm−3.

The state selector is situated at z=241 mm. For the J=1/2 measurement it is a laser beam of the same frequency, polarization and propagation direction as the detection laser. This beam depletes the population of the negative parity component. For the J=3/2 measurement, we drive population from (1/2−, F) to the (3/2+, F′) state, using approximately 10 μW of radiation near 533 GHz. This mm-wave radiation is the amplified 54th harmonic of a frequency synthesizer. The radiation is collimated by a teflon lens of 30 mm focal length, giving a 10-mm-diameter beam, which propagates along x and is polarized along y. The efficiency of the population transfer is about 50%.

The microwave transmission line resonator is built from a pair of 30-mm-wide parallel copper plates separated by 5 mm along y. At the Λ-doublet frequencies of interest, the transmission line can only support a TEM00 mode polarized along y. Microwave radiation is launched into one end from a semi-rigid coaxial cable. The other end is not terminated and so a resonator with a quality factor of approximately 10 is formed. For each frequency component measured, the length was cut so that the transmission line had a resonance at that frequency. The length was approximately 480 mm for the J=1/2 measurement and 440 mm for the J=3/2 measurement. The microwave radiation is generated by a synthesizer phase locked to a GPS frequency reference whose fractional accuracy is better than 10−13. A fast, high isolation switch controls the microwave pulse duration. The transmission line is housed inside a mu-metal magnetic shield. For the J=1/2 measurement a single shield is used, whereas for the J=3/2 measurement we use a pair of nested shields. The outer shield extended into the region of the state selector, and a pair of holes cut into this shield allowed the mm-wave beam to pass through. Coils inside the shields allow us to apply well-controlled magnetic fields.

For each transition, we first make an approximate measurement of the transition frequency by applying a single microwave pulse to the molecules and measuring the population as a function of the frequency. Owing to the two counter-propagating waves, we observe two peaks separated by twice the Doppler shift. Their relative amplitudes indicate that Δ≈0.1. The mean frequency of these peaks is the transition frequency. With the frequency fixed at this value, we map out the standing microwave field by driving the transition with a 15-μs pulse and scanning the time when it is applied. The times at which the resonance is largest are the times when the molecules pass each of the antinodes. Next, we apply a short pulse when the molecules are at an antinode, and we scan the microwave power. We observe Rabi oscillations in the population, and thus determine the power needed to drive a π-pulse. We do this for each of the antinodes. With the parameters now fixed, we measure the transition frequency using the Ramsey method of separated oscillating fields39, as described in the main text. Compared with the continuous wave excitation, this method has a higher resolution and is relatively immune to the broadening and distortion of the lineshape caused by non-uniform fields.

Author contributions

The experiment was designed and built by S.T., S.K.T, R.J.H. and M.R.T. The data were collected by S.T., S.K.T., R.J.H. and H.J.L. The laboratory data were analysed by S.T., R.J.H. and M.R.T. The astronomical data were analysed by M.R.T. The manuscript was drafted by S.T., M.R.T. and E.A.H. and the outlook prepared by C.H. The work was inspired by M.G.K. and the team was led by M.R.T and E.A.H. All authors discussed the methodology and the results, and improved the manuscript.

Additional information

How to cite this article: Truppe, S. et al. A search for varying fundamental constants using hertz-level frequency measurements of cold CH molecules. Nat. Commun. 4:2600 doi: 10.1038/ncomms3600 (2013).