Literature DB >> 24083671

PM10 and PM2.5 and health risk assessment for heavy metals in a typical factory for cathode ray tube television recycling.

Wenxiong Fang1, Yichen Yang, Zhenming Xu.   

Abstract

The representative waste television recycling process was chosen as the object of this study, including manual dismantling and mechanical separation of printed circuit boards (PCBs) and cathode ray tubes (CRTs) in two independent workshops. During these recycling processes, fine particulate matter and heavy metals will be released into the air to impact the environment and the health of the workers. The mass concentrations of PM2.5 (particles below 2.5 μm diameter) in mechanical and dismantling workshops ranged from 252.6 to 290.8 μg/m(3) and from 112.7 to 169.4 μg/m(3), respectively. The average concentration of PM2.5 around the workshop was 98.5 μg/m(3). Meanwhile, the contents of PM10 (particles below 10 μm diameter) were all below the risk threshold, except that (360.4 μg/m(3)) monitored in the mechanical workshop. In two workshops, Pb (20.46 and 6.935 mg/g) was the most enriched metal in the PM2.5 samples, while in PM10, the concentration of Cu (27.76 and 31.80 mg/g) was the largest. The concentration of Cd was the least in both PM10 and PM2.5. Health risk assessment showed that the total hazard indexes for non-carcinogenic metal in PM2.5 monitored in mechanical and dismantling workshops and in the southeast of the workshops were 7.61, 3.01, and 1.57, respectively, all above the safety level. Furthermore, Pb (7.28 and 3.01) might possibly have a non-carcinogenic effect on the workers in two workshops, and the sequence of the hazard quotient (HQ) through the three exposure ways was ingestion > dermal contact > inhalation. The lifetime cancer risk of four targeted metals was Cr > Ni > Pb > Cd, which could be proven in all monitoring samples. This study aims to provide a large amount of valid data for the State Environmental Protection Department to develop relevant environmental standards and for companies to improve the waste television recycling system to be more efficiently and environmentally friendly.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 24083671     DOI: 10.1021/es4026613

Source DB:  PubMed          Journal:  Environ Sci Technol        ISSN: 0013-936X            Impact factor:   9.028


  12 in total

1.  Environmental risk assessment of CRT and PCB workshops in a mobile e-waste recycling plant.

Authors:  Qingbin Song; Xianlai Zeng; Jinhui Li; Huabo Duan; Wenyi Yuan
Journal:  Environ Sci Pollut Res Int       Date:  2015-04-23       Impact factor: 4.223

2.  Trace element characterization of fine particulate matter and assessment of associated health risk in mining area, transportation routes and institutional area of Dhanbad, India.

Authors:  Sridevi Jena; Atahar Perwez; Gurdeep Singh
Journal:  Environ Geochem Health       Date:  2019-06-03       Impact factor: 4.609

3.  Chemical fractionation and health risk assessment of particulate matter-bound metals in Pune, India.

Authors:  Rohi Jan; Ritwika Roy; Suman Yadav; P Gursumeeran Satsangi
Journal:  Environ Geochem Health       Date:  2016-11-26       Impact factor: 4.609

4.  Residents health risk of Pb, Cd and Cu exposure to street dust based on different particle sizes around zinc smelting plant, Northeast of China.

Authors:  Qiuhong Zhou; Na Zheng; Jingshuang Liu; Yang Wang; Chongyu Sun; Qiang Liu; Heng Wang; Jingjing Zhang
Journal:  Environ Geochem Health       Date:  2014-08-13       Impact factor: 4.609

5.  Risk assessment of atmospheric heavy metals exposure in Baotou, a typical industrial city in northern China.

Authors:  Kexin Li; Tao Liang; Lingqing Wang
Journal:  Environ Geochem Health       Date:  2015-09-08       Impact factor: 4.609

6.  Occupational exposures to particulate matter and PM2.5-associated polycyclic aromatic hydrocarbons at the Agbogbloshie waste recycling site in Ghana.

Authors:  Lawrencia Kwarteng; Amila M Devasurendra; Zoey Laskaris; John Arko-Mensah; Afua A Amoabeng Nti; Sylvia Takyi; Augustine A Acquah; Duah Dwomoh; Nil Basu; Thomas Robins; Julius N Fobil; Stuart Batterman
Journal:  Environ Int       Date:  2021-11-20       Impact factor: 9.621

7.  Human health risk assessment of PM2.5-bound heavy metal of anthropogenic sources in the Khon Kaen Province of Northeast Thailand.

Authors:  Pornpun Sakunkoo; Theerachai Thonglua; Sarawut Sangkham; Chananya Jirapornkul; Yuparat Limmongkon; Sakda Daduang; Thanee Tessiri; Jetnapis Rayubkul; Sakesun Thongtip; Naowarat Maneenin; Sittichai Pimonsree
Journal:  Heliyon       Date:  2022-06-07

8.  Metals and metalloids in PM10 in Nandan County, Guangxi, China, and the health risks posed.

Authors:  Guanghui Guo; Bo Song; Deshang Xia; Zijie Yang; Fopeng Wang
Journal:  Environ Geochem Health       Date:  2018-03-16       Impact factor: 4.609

9.  Relationship between e-waste recycling and human health risk in India: a critical review.

Authors:  Abhishek Kumar Awasthi; Xianlai Zeng; Jinhui Li
Journal:  Environ Sci Pollut Res Int       Date:  2016-02-16       Impact factor: 4.223

10.  Contamination identification, source apportionment and health risk assessment of trace elements at different fractions of atmospheric particles at iron and steelmaking areas in China.

Authors:  Xiaoteng Zhou; Vladimir Strezov; Yijiao Jiang; Xiaoxia Yang; Tao Kan; Tim Evans
Journal:  PLoS One       Date:  2020-04-02       Impact factor: 3.240

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.