| Literature DB >> 2406422 |
M O Atta1, B G Smith, D Brown.
Abstract
Sandblasted surfaces of a beryllium-free, nickel-chromium alloy were bonded with one of three chemical adhesives. After either immersion in water for up to 6 months or thermal cycling between 5 degrees and 60 degrees C for 500 cycles, the bonded specimens were tested for both shear and tensile strength. The highest values of tensile and shear bond strengths were found with Panavia Ex material, and these values showed no significant changes after thermal cycling. For ABC cement and for Super-Bond C & B material, the strength of the bond was significantly improved with thermal cycling. However, immersion in water for 6 months caused a significant decrease in the strength of the bond of specimens adhered with ABC cement.Entities:
Mesh：
Substances：
Year: 1990 PMID： 2406422 DOI： 10.1016/0022-3913(90)90096-u
Source DB: PubMed Journal: J Prosthet Dent ISSN： 0022-3913 Impact factor: 3.426