Literature DB >> 23996379

Influence of CAD/CAM all-ceramic materials on cell viability, migration ability and adenylate kinase release of human gingival fibroblasts and oral keratinocytes.

A M Pabst1, C Walter1, L Grassmann2, M Weyhrauch2, D D Brüllmann3, T Ziebart1, H Scheller2, K M Lehmann4.   

Abstract

OBJECTIVES: The aim of this study was to analyze the influence of four CAD/CAM all-ceramic materials on cell viability, migration ability and adenylate kinase (ADK) release of human gingival fibroblasts (HGF) and oral keratinocytes (HOK).
MATERIALS AND METHODS: HGF and HOK were cultured on disc-shaped CAD/CAM all-ceramic materials (e.max CAD LT, e.max CAD HT, Empress CAD and Mark II) and on discs made of tissue culture polystyrene surface (TCPS) serving as control. Cell viability was analyzed by using an MTT assay, and migration ability was investigated by a scratch assay. A ToxiLight assay has been performed to analyze the effect of all-ceramic materials on ADK release and cell apoptosis.
RESULTS: At MTT assay for HGF, no significant decrease of cell viability could be detected at all points of measurement (p each > 0.05), while HOK demonstrated a significant decrease in cell viability especially on Empress CAD and Mark II at each point of measurement (p each < 0.001). Scratch assay demonstrated an increased migration ability for HGF on e.max CAD HT, Empress CAD and Mark II (p each < 0.001), whereas HOK showed a significantly decreased migration ability on all tested materials at all points of measurement (between -36 % and -71 %; p each < 0.001). At ToxiLight assay, only small cytotoxic effects of the all-ceramic materials could be investigated.
CONCLUSIONS: This study disclosed significant differences in cell viability and migration ability of HGF and HOK on CAD/CAM all-ceramic materials. CLINICAL RELEVANCE: CAD/CAM all-ceramic materials can influence oral cell lines responsible for soft tissue creation which may affect the esthetic outcome.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23996379     DOI: 10.1007/s00784-013-1098-9

Source DB:  PubMed          Journal:  Clin Oral Investig        ISSN: 1432-6981            Impact factor:   3.573


  33 in total

1.  Qualitative and quantitative study of human osteoblast adhesion on materials with various surface roughnesses.

Authors:  K Anselme; M Bigerelle; B Noel; E Dufresne; D Judas; A Iost; P Hardouin
Journal:  J Biomed Mater Res       Date:  2000-02

Review 2.  Clinical performance of CEREC ceramic inlays: a systematic review.

Authors:  N Martin; N M Jedynakiewicz
Journal:  Dent Mater       Date:  1999-01       Impact factor: 5.304

Review 3.  Implant materials, designs, and surface topographies: their effect on osseointegration. A literature review.

Authors:  N Sykaras; A M Iacopino; V A Marker; R G Triplett; R D Woody
Journal:  Int J Oral Maxillofac Implants       Date:  2000 Sep-Oct       Impact factor: 2.804

4.  Clinical evaluation of adhesively placed Cerec endo-crowns after 2 years--preliminary results.

Authors:  A Bindl; W H Mörmann
Journal:  J Adhes Dent       Date:  1999       Impact factor: 2.359

5.  An innovative method for evaluation of the 3-D internal fit of CAD/CAM crowns fabricated after direct optical versus indirect laser scan digitizing.

Authors:  Ralph G Luthardt; Gido Bornemann; Susanne Lemelson; Michael H Walter; Alfons Hüls
Journal:  Int J Prosthodont       Date:  2004 Nov-Dec       Impact factor: 1.681

6.  Clinical marginal and internal gaps of Procera AllCeram crowns.

Authors:  Y Kokubo; C Ohkubo; M Tsumita; A Miyashita; P Vult von Steyern; S Fukushima
Journal:  J Oral Rehabil       Date:  2005-07       Impact factor: 3.837

7.  Sealing the skin barrier around transcutaneous implants: in vitro study of keratinocyte proliferation and adhesion in response to surface modifications of titanium alloy.

Authors:  C J Pendegrass; D Gordon; C A Middleton; S Ng Man Sun; G W Blunn
Journal:  J Bone Joint Surg Br       Date:  2008-01

8.  In vitro cytotoxicity of resin-containing restorative materials after aging in artificial saliva.

Authors:  J C Wataha; F A Rueggeberg; C A Lapp; J B Lewis; P E Lockwood; J W Ergle; D J Mettenburg
Journal:  Clin Oral Investig       Date:  1999-09       Impact factor: 3.573

9.  Fit of three porcelain-fused-to-metal marginal designs in vivo: a scanning electron microscope study.

Authors:  U C Belser; M I MacEntee; W A Richter
Journal:  J Prosthet Dent       Date:  1985-01       Impact factor: 3.426

Review 10.  The biocompatibility of resin-modified glass-ionomer cements for dentistry.

Authors:  John W Nicholson; Beata Czarnecka
Journal:  Dent Mater       Date:  2008-06-09       Impact factor: 5.304

View more
  8 in total

1.  Influence of CAD/CAM zirconia for implant-abutment manufacturing on gingival fibroblasts and oral keratinocytes.

Authors:  A M Pabst; C Walter; A Bell; M Weyhrauch; I Schmidtmann; H Scheller; K M Lehmann
Journal:  Clin Oral Investig       Date:  2015-09-23       Impact factor: 3.573

2.  A new method using insert-based systems (IBS) to improve cell behavior study on flexible and rigid biomaterials.

Authors:  Charlotte Grenade; Nicolas Moniotte; Eric Rompen; Alain Vanheusden; Amélie Mainjot; Marie-Claire De Pauw-Gillet
Journal:  Cytotechnology       Date:  2016-03-25       Impact factor: 2.058

3.  Effect of Clinically Relevant CAD/CAM Zirconia Polishing on Gingival Fibroblast Proliferation and Focal Adhesions.

Authors:  Nicholas G Fischer; Jeffrey Wong; Andrew Baruth; D Roselyn Cerutis
Journal:  Materials (Basel)       Date:  2017-11-27       Impact factor: 3.623

4.  Biocompatibility of Polymer and Ceramic CAD/CAM Materials with Human Gingival Fibroblasts (HGFs).

Authors:  María Rizo-Gorrita; Cristina Herráez-Galindo; Daniel Torres-Lagares; María-Ángeles Serrera-Figallo; José-Luis Gutiérre-Pérez
Journal:  Polymers (Basel)       Date:  2019-09-03       Impact factor: 4.329

Review 5.  Fixed Prosthetic Restorations and Periodontal Health: A Narrative Review.

Authors:  Viritpon Srimaneepong; Artak Heboyan; Muhammad Sohail Zafar; Zohaib Khurshid; Anand Marya; Gustavo V O Fernandes; Dinesh Rokaya
Journal:  J Funct Biomater       Date:  2022-02-01

6.  A Review on CAD/CAM Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) and Polymethyl Methacrylate (PMMA) and Their Biological Behavior.

Authors:  Cristina Herráez-Galindo; María Rizo-Gorrita; Serafín Maza-Solano; María-Angeles Serrera-Figallo; Daniel Torres-Lagares
Journal:  Polymers (Basel)       Date:  2022-02-24       Impact factor: 4.329

7.  Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses: An In Vivo Study.

Authors:  Artak Heboyan; Mikayel Manrikyan; Muhammad Sohail Zafar; Dinesh Rokaya; Ruzan Nushikyan; Izabella Vardanyan; Anna Vardanyan; Zohaib Khurshid
Journal:  Int J Mol Sci       Date:  2021-05-22       Impact factor: 5.923

8.  Cytotoxicity and biocompatibility of Zirconia (Y-TZP) posts with various dental cements.

Authors:  Hyeongsoon Shin; Hyunjung Ko; Miri Kim
Journal:  Restor Dent Endod       Date:  2016-05-30
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.