Literature DB >> 23974799

Fluoride release and mechanical properties after 1-year water storage of recent restorative glass ionomer cements.

Maho Shiozawa1, Hidekazu Takahashi2, Naohiko Iwasaki3.   

Abstract

OBJECTIVES: The objective of this study was to evaluate the relationships between fluoride release and mechanical properties after 1-year water storage of five recent restorative glass ionomer cements (GICs).
MATERIALS AND METHODS: Five GICs, FujiIX GP EXTRA (FEX), FujiIX GP (FIX), GlasIonomer FX-II (GFX), Ketac Molar Easymix (KME), and Riva Self Cure (RSC), were examined. Cumulative fluoride release, compressive strength, and surface hardness were measured up to 1-year storage (n = 5), and analyzed with one-way or two-way ANOVA and Tukey HSD test (α = 0.05). Elemental compositions before and after 1-year storage were also examined (n = 3).
RESULTS: The amounts of fluoride release were significantly different among the products. The highest amount of fluoride release occurred during the first day. Then, the amount of fluoride release rapidly decreased and still continued until 1-year storage. Compressive strengths indicated that two main factors were significant (GFX < FEX = RSC < FIX < KME; 1 day < 1 week = 1 month = 3 months = 6 months = 1 year), but surface hardness showed a slightly different tendency (GFX = RSC < FEX = FIX = KME; 1 year < 1 day < 1 week = 1 month = 3 months = 6 months). Significant correlation was found between decrease of silicon and decrease rate of the surface hardness.
CONCLUSIONS: Fluoride releases were detected up to 1-year storage, but the mechanical properties slightly decreased due to decrease of Si after 1-year storage. Elution of Si instead of fluoride release was considered more critical to deteriorate the mechanical properties of GICs. CLINICAL RELEVANCE: Fluoride released for 1-year water storage will contribute to secondary caries prevention. The amount of fluoride release did not affect these mechanical properties. These results indicate the usefulness of these GICs.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23974799     DOI: 10.1007/s00784-013-1074-4

Source DB:  PubMed          Journal:  Clin Oral Investig        ISSN: 1432-6981            Impact factor:   3.573


  18 in total

1.  In vitro fluoride release from restorative materials in water versus artificial saliva medium (SAGF).

Authors:  B Levallois; Y Fovet; L Lapeyre; J Y Gal
Journal:  Dent Mater       Date:  1998-11       Impact factor: 5.304

2.  Effect of one-year water storage on the surface microhardness of resin-modified versus conventional glass-ionomer cements.

Authors:  J Ellakuria; R Triana; N Mínguez; I Soler; G Ibaseta; J Maza; F García-Godoy
Journal:  Dent Mater       Date:  2003-06       Impact factor: 5.304

3.  Microhardness and chemical analysis of high-viscous glass-ionomer cement after 10 years of clinical service as ART restorations.

Authors:  Régia Luzia Zanata; Ana Carolina Magalhães; José Roberto Pereira Lauris; Maria Teresa Atta; Linda Wang; Maria Fidela de Lima Navarro
Journal:  J Dent       Date:  2011-09-16       Impact factor: 4.379

Review 4.  Chemistry of glass-ionomer cements: a review.

Authors:  J W Nicholson
Journal:  Biomaterials       Date:  1998-03       Impact factor: 12.479

Review 5.  Glass-ionomer cements in restorative dentistry.

Authors:  J W Nicholson; T P Croll
Journal:  Quintessence Int       Date:  1997-11       Impact factor: 1.677

6.  Release of fluoride and other elements from light-cured glass ionomers in neutral and acidic conditions.

Authors:  H Forss
Journal:  J Dent Res       Date:  1993-08       Impact factor: 6.116

7.  Hardness and in vitro wear of a novel ceramic restorative cement.

Authors:  Karin Sunnegårdh-Grönberg; Anne Peutzfeldt; Jan W V van Dijken
Journal:  Eur J Oral Sci       Date:  2002-04       Impact factor: 2.612

8.  Surface hardness change of restorative filling materials stored in saliva.

Authors:  K Okada; S Tosaki; K Hirota; W R Hume
Journal:  Dent Mater       Date:  2001-01       Impact factor: 5.304

Review 9.  New trends in glass-ionomer chemistry.

Authors:  R Guggenberger; R May; K P Stefan
Journal:  Biomaterials       Date:  1998-03       Impact factor: 12.479

Review 10.  Dental composites/glass ionomers: the materials.

Authors:  R L Bowen; W A Marjenhoff
Journal:  Adv Dent Res       Date:  1992-09
View more
  4 in total

1.  Do conventional glass ionomer cements release more fluoride than resin-modified glass ionomer cements?

Authors:  Maria Fernanda Costa Cabral; Roberto Luiz de Menezes Martinho; Manoel Valcácio Guedes-Neto; Maria Augusta Bessa Rebelo; Danielson Guedes Pontes; Flávia Cohen-Carneiro
Journal:  Restor Dent Endod       Date:  2015-05-26

2.  Randomized clinical trial of encapsulated and hand-mixed glass-ionomer ART restorations: one-year follow-up.

Authors:  Maria Cristina Carvalho de Almendra Freitas; Ticiane Cestari Fagundes; Karin Cristina da Silva Modena; Guilherme Saintive Cardia; Maria Fidela de Lima Navarro
Journal:  J Appl Oral Sci       Date:  2018-01-18       Impact factor: 2.698

3.  Fluoride release from two types of fluoride-containing orthodontic adhesives: Conventional versus resin-modified glass ionomer cements-An in vitro study.

Authors:  Yasemin Dziuk; Sachin Chhatwani; Stephan C Möhlhenrich; Sabrina Tulka; Ella A Naumova; Gholamreza Danesh
Journal:  PLoS One       Date:  2021-02-26       Impact factor: 3.240

4.  Evaluation of the Mechanical Properties of Three Resin-Modified Glass-Ionomer Materials.

Authors:  Heleine Maria Chagas Rêgo; Sheila Butler; Maria Jacinta Coelho Santos
Journal:  Biomed Res Int       Date:  2022-08-02       Impact factor: 3.246

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.