Literature DB >> 23822412

Use of plan quality degradation to evaluate tradeoffs in delivery efficiency and clinical plan metrics arising from IMRT optimizer and sequencer compromises.

Joel R Wilkie1, Martha M Matuszak, Mary Feng, Jean M Moran, Benedick A Fraass.   

Abstract

PURPOSE: Plan degradation resulting from compromises made to enhance delivery efficiency is an important consideration for intensity modulated radiation therapy (IMRT) treatment plans. IMRT optimization and/or multileaf collimator (MLC) sequencing schemes can be modified to generate more efficient treatment delivery, but the effect those modifications have on plan quality is often difficult to quantify. In this work, the authors present a method for quantitative assessment of overall plan quality degradation due to tradeoffs between delivery efficiency and treatment plan quality, illustrated using comparisons between plans developed allowing different numbers of intensity levels in IMRT optimization and/or MLC sequencing for static segmental MLC IMRT plans.
METHODS: A plan quality degradation method to evaluate delivery efficiency and plan quality tradeoffs was developed and used to assess planning for 14 prostate and 12 head and neck patients treated with static IMRT. Plan quality was evaluated using a physician's predetermined "quality degradation" factors for relevant clinical plan metrics associated with the plan optimization strategy. Delivery efficiency and plan quality were assessed for a range of optimization and sequencing limitations. The "optimal" (baseline) plan for each case was derived using a clinical cost function with an unlimited number of intensity levels. These plans were sequenced with a clinical MLC leaf sequencer which uses >100 segments, assuring delivered intensities to be within 1% of the optimized intensity pattern. Each patient's optimal plan was also sequenced limiting the number of intensity levels (20, 10, and 5), and then separately optimized with these same numbers of intensity levels. Delivery time was measured for all plans, and direct evaluation of the tradeoffs between delivery time and plan degradation was performed.
RESULTS: When considering tradeoffs, the optimal number of intensity levels depends on the treatment site and on the stage in the process at which the levels are limited. The cost of improved delivery efficiency, in terms of plan quality degradation, increased as the number of intensity levels in the sequencer or optimizer decreased. The degradation was more substantial for the head and neck cases relative to the prostate cases, particularly when fewer than 20 intensity levels were used. Plan quality degradation was less severe when the number of intensity levels was limited in the optimizer rather than the sequencer.
CONCLUSIONS: Analysis of plan quality degradation allows for a quantitative assessment of the compromises in clinical plan quality as delivery efficiency is improved, in order to determine the optimal delivery settings. The technique is based on physician-determined quality degradation factors and can be extended to other clinical situations where investigation of various tradeoffs is warranted.

Entities:  

Mesh:

Year:  2013        PMID: 23822412      PMCID: PMC3695972          DOI: 10.1118/1.4808118

Source DB:  PubMed          Journal:  Med Phys        ISSN: 0094-2405            Impact factor:   4.071


  35 in total

1.  Intensity modulation with the "step and shoot" technique using a commercial MLC: a planning study. Multileaf collimator.

Authors:  M A Keller-Reichenbecher; T Bortfeld; S Levegrün; J Stein; K Preiser; W Schlegel
Journal:  Int J Radiat Oncol Biol Phys       Date:  1999-12-01       Impact factor: 7.038

2.  Delivery of intensity-modulated radiation therapy with a conventional multileaf collimator: comparison of dynamic and segmental methods.

Authors:  C S Chui; M F Chan; E Yorke; S Spirou; C C Ling
Journal:  Med Phys       Date:  2001-12       Impact factor: 4.071

3.  Smoothing intensity-modulated beam profiles to improve the efficiency of delivery.

Authors:  S V Spirou; N Fournier-Bidoz; J Yang; C S Chui; C C Ling
Journal:  Med Phys       Date:  2001-10       Impact factor: 4.071

4.  Minimizing the number of segments in a delivery sequence for intensity-modulated radiation therapy with a multileaf collimator.

Authors:  J Dai; Y Zhu
Journal:  Med Phys       Date:  2001-10       Impact factor: 4.071

5.  Direct aperture optimization-based intensity-modulated radiotherapy for whole breast irradiation.

Authors:  Ergun E Ahunbay; Guang-Pei Chen; Steven Thatcher; Paul A Jursinic; Julia White; Katherine Albano; X Allen Li
Journal:  Int J Radiat Oncol Biol Phys       Date:  2007-02-01       Impact factor: 7.038

6.  Reduction of IMRT beam complexity through the use of beam modulation penalties in the objective function.

Authors:  Martha M Matuszak; Edward W Larsen; Benedick A Fraass
Journal:  Med Phys       Date:  2007-02       Impact factor: 4.071

7.  Volumetric modulated arc therapy: IMRT in a single gantry arc.

Authors:  Karl Otto
Journal:  Med Phys       Date:  2008-01       Impact factor: 4.071

8.  The tradeoff between treatment plan quality and required number of monitor units in intensity-modulated radiotherapy.

Authors:  David Craft; Philipp Süss; Thomas Bortfeld
Journal:  Int J Radiat Oncol Biol Phys       Date:  2007-04-01       Impact factor: 7.038

9.  Combining segment generation with direct step-and-shoot optimization in intensity-modulated radiation therapy.

Authors:  Fredrik Carlsson
Journal:  Med Phys       Date:  2008-09       Impact factor: 4.071

10.  Adaptive diffusion smoothing: a diffusion-based method to reduce IMRT field complexity.

Authors:  Martha M Matuszak; Edward W Larsen; Kyung-Wook Jee; Daniel L McShan; Benedick A Fraass
Journal:  Med Phys       Date:  2008-04       Impact factor: 4.071

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.