Literature DB >> 23719851

Reduction in welding fume and metal exposure of stainless steel welders: an example from the WELDOX study.

Martin Lehnert1, Tobias Weiss, Beate Pesch, Anne Lotz, Sandra Zilch-Schöneweis, Evelyn Heinze, Rainer Van Gelder, Jens-Uwe Hahn, Thomas Brüning.   

Abstract

PURPOSE: In a plant where flux-cored arc welding was applied to stainless steel, we investigated changes in airborne and internal metal exposure following improvements of exhaust ventilation and respiratory protection.
METHODS: Twelve welders were examined at a time in 2008 and in 2011 after improving health protection. Seven welders were enrolled in both surveys. Exposure measurement was performed by personal sampling of respirable welding fume inside the welding helmets during one work shift. Urine and blood samples were taken after the shift. Chromium (Cr), nickel (Ni), and manganese (Mn) were determined in air and biological samples.
RESULTS: The geometric mean of respirable particles could be reduced from 4.1 mg/m(3) in 2008-0.5 mg/m(3) in 2011. Exposure to airborne metal compounds was also strongly reduced (Mn: 399 vs. 6.8 μg/m(3); Cr: 187 vs. 6.3 μg/m(3); Ni: 76 vs. 2.8 μg/m(3)), with the most striking reduction inside helmets with purified air supply. Area sampling revealed several concentrations above established or proposed exposure limits. Urinary metal concentrations were also reduced, but to a lesser extent (Cr: 14.8 vs. 4.5 μg/L; Ni: 7.9 vs. 3.1 μg/L). Although biologically regulated, the mean Mn concentration in blood declined from 12.8 to 8.9 μg/L.
CONCLUSION: This intervention study demonstrated a distinct reduction in the exposure of welders using improved exhaust ventilation and welding helmets with purified air supply in the daily routine. Data from area sampling and biomonitoring indicated that the area background level may add considerably to the internal exposure.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23719851     DOI: 10.1007/s00420-013-0884-7

Source DB:  PubMed          Journal:  Int Arch Occup Environ Health        ISSN: 0340-0131            Impact factor:   3.015


  18 in total

1.  Half life of chromium in serum and urine in a former plasma cutter of stainless steel.

Authors:  R Petersen; J F Thomsen; N K Jørgensen; S Mikkelsen
Journal:  Occup Environ Med       Date:  2000-02       Impact factor: 4.402

2.  MEGA-database: one million data since 1972.

Authors:  R Stamm
Journal:  Appl Occup Environ Hyg       Date:  2001-02

Review 3.  Local exhaust ventilation for the control of welding fumes in the construction industry--a literature review.

Authors:  Michael R Flynn; Pam Susi
Journal:  Ann Occup Hyg       Date:  2012-03-29

4.  Application of mathematical modelling for assessing the biological half-times of chromium and nickel in field studies.

Authors:  A Tossavainen; M Nurminen; P Mutanen; S Tola
Journal:  Br J Ind Med       Date:  1980-08

Review 5.  Statistical modeling to determine sources of variability in exposures to welding fumes.

Authors:  Sa Liu; S Katharine Hammond; Stephen M Rappaport
Journal:  Ann Occup Hyg       Date:  2011-02-25

Review 6.  Manganese (Mn) and iron (Fe): interdependency of transport and regulation.

Authors:  Vanessa A Fitsanakis; Na Zhang; Stephanie Garcia; Michael Aschner
Journal:  Neurotox Res       Date:  2009-11-18       Impact factor: 3.911

7.  Manganese and welding fume exposure and control in construction.

Authors:  John D Meeker; Pam Susi; Michael R Flynn
Journal:  J Occup Environ Hyg       Date:  2007-12       Impact factor: 2.155

8.  Exposure to soluble barium compounds: an interventional study in arc welders.

Authors:  W Zschiesche; K H Schaller; D Weltle
Journal:  Int Arch Occup Environ Health       Date:  1992       Impact factor: 3.015

9.  Levels and predictors of airborne and internal exposure to chromium and nickel among welders--results of the WELDOX study.

Authors:  Tobias Weiss; Beate Pesch; Anne Lotz; Eleonore Gutwinski; Rainer Van Gelder; Ewald Punkenburg; Benjamin Kendzia; Katarzyna Gawrych; Martin Lehnert; Evelyn Heinze; Andrea Hartwig; Heiko U Käfferlein; Jens-Uwe Hahn; Thomas Brüning
Journal:  Int J Hyg Environ Health       Date:  2012-08-25       Impact factor: 5.840

10.  Elimination kinetics of metals after an accidental exposure to welding fumes.

Authors:  Karl H Schaller; György Csanady; Johannes Filser; Barbara Jüngert; Hans Drexler
Journal:  Int Arch Occup Environ Health       Date:  2007-02-24       Impact factor: 2.851

View more
  8 in total

1.  Modelling of occupational exposure to inhalable nickel compounds.

Authors:  Benjamin Kendzia; Beate Pesch; Dorothea Koppisch; Rainer Van Gelder; Katrin Pitzke; Wolfgang Zschiesche; Thomas Behrens; Tobias Weiss; Jack Siemiatycki; Jerome Lavoué; Karl-Heinz Jöckel; Roger Stamm; Thomas Brüning
Journal:  J Expo Sci Environ Epidemiol       Date:  2017-01-18       Impact factor: 5.563

2.  Association of exposure to manganese and iron with relaxation rates R1 and R2*- magnetic resonance imaging results from the WELDOX II study.

Authors:  Beate Pesch; Ulrike Dydak; Anne Lotz; Swaantje Casjens; Clara Quetscher; Martin Lehnert; Jessica Abramowski; Christoph Stewig; Chien-Lin Yeh; Tobias Weiss; Christoph van Thriel; Lennard Herrmann; Siegfried Muhlack; Dirk Woitalla; Benjamin Glaubitz; Tobias Schmidt-Wilcke; Thomas Brüning
Journal:  Neurotoxicology       Date:  2017-08-25       Impact factor: 4.294

3.  Association of exposure to manganese and fine motor skills in welders - Results from the WELDOX II study.

Authors:  Anne Lotz; Beate Pesch; Swaantje Casjens; Martin Lehnert; Wolfgang Zschiesche; Dirk Taeger; Chien-Lin Yeh; Tobias Weiss; Tobias Schmidt-Wilcke; Clara Quetscher; Stefan Gabriel; Maria Angela Samis Zella; Dirk Woitalla; Ulrike Dydak; Christoph van Thriel; Thomas Brüning; Thomas Behrens
Journal:  Neurotoxicology       Date:  2020-12-07       Impact factor: 4.398

4.  Respirator usage protects brain white matter from welding fume exposure: A pilot magnetic resonance imaging study of welders.

Authors:  Elza Rechtman; Paul Curtin; Lynn C Onyebeke; Victoria X Wang; Demetrios M Papazaharias; Danielle Hazeltine; Erik de Water; Ismail Nabeel; Venkatesh Mani; Norman Zuckerman; Roberto G Lucchini; Denise Gaughan; Cheuk Y Tang; Megan K Horton
Journal:  Neurotoxicology       Date:  2020-03-23       Impact factor: 4.398

5.  Occupational Exposure to Hexavalent Chromium, Nickel and PAHs: A Mixtures Risk Assessment Approach Based on Literature Exposure Data from European Countries.

Authors:  Ana Maria Tavares; Susana Viegas; Henriqueta Louro; Thomas Göen; Tiina Santonen; Mirjam Luijten; Andreas Kortenkamp; Maria João Silva
Journal:  Toxics       Date:  2022-07-29

6.  Oxidatively damaged guanosine in white blood cells and in urine of welders: associations with exposure to welding fumes and body iron stores.

Authors:  Beate Pesch; Anne Lotz; Holger M Koch; Boleslaw Marczynski; Swaantje Casjens; Heiko U Käfferlein; Peter Welge; Martin Lehnert; Evelyn Heinze; Rainer Van Gelder; Jens-Uwe Hahn; Thomas Behrens; Monika Raulf; Andrea Hartwig; Tobias Weiss; Thomas Brüning
Journal:  Arch Toxicol       Date:  2014-08-09       Impact factor: 5.153

7.  Effects of Heavy Metal Exposure on Shipyard Welders: A Cautionary Note for 8-Hydroxy-2'-Deoxyguanosine.

Authors:  Ting-Yao Su; Chih-Hong Pan; Yuan-Ting Hsu; Ching-Huang Lai
Journal:  Int J Environ Res Public Health       Date:  2019-11-29       Impact factor: 3.390

8.  HBM4EU Chromates Study: Determinants of Exposure to Hexavalent Chromium in Plating, Welding and Other Occupational Settings.

Authors:  Susana Viegas; Carla Martins; Beatrice Bocca; Radia Bousoumah; Radu Corneliu Duca; Karen S Galea; Lode Godderis; Ivo Iavicoli; Beata Janasik; Kate Jones; Elizabeth Leese; Veruscka Leso; Sophie Ndaw; An van Nieuwenhuyse; Katrien Poels; Simo P Porras; Flavia Ruggieri; Maria João Silva; Jelle Verdonck; Wojciech Wasowicz; Paul T J Scheepers; Tiina Santonen
Journal:  Int J Environ Res Public Health       Date:  2022-03-19       Impact factor: 3.390

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.