Literature DB >> 23705628

Multistep pedicle screw insertion procedure with patient-specific lamina fit-and-lock templates for the thoracic spine: clinical article.

Taku Sugawara1, Naoki Higashiyama, Shuichi Kaneyama, Masato Takabatake, Naoko Watanabe, Fujio Uchida, Masatoshi Sumi, Kazuo Mizoi.   

Abstract

OBJECT: Pedicle screw fixation is a standard procedure of spinal instrumentation, but accurate screw placement is essential to avoid injury to the adjacent structures, such as the vessels, nerves, and viscera. The authors recently developed an intraoperative screw guiding method in which patient-specific laminar templates were used, and verified the accuracy of the multistep procedure in the thoracic spine.
METHODS: Preoperative bone images of the CT scans were analyzed using 3D/multiplanar imaging software and the trajectories of the screws were planned. Plastic templates with screw guiding structures were created for each lamina by using 3D design and printing technology. Three types of templates were made for precise multistep guidance, and all templates were specially designed to fit and lock on the lamina during the procedure. Plastic vertebra models were also generated and preoperative screw insertion simulation was performed. Surgery was performed using this patient-specific screw guide template system, and the placement of screws was postoperatively evaluated using CT scanning.
RESULTS: Ten patients with thoracic or cervicothoracic pathological entities were selected to verify this novel procedure. Fifty-eight pedicle screws were placed using the screw guide template system. Preoperatively, each template was found to fit exactly and to lock on the lamina of the vertebra models, and screw insertion simulation was successfully performed. Intraoperatively the templates also fit and locked on the patient lamina, and screw insertion was completed successfully. Postoperative CT scans confirmed that no screws violated the cortex of the pedicles, and the mean deviation of the screws from the planned trajectories was 0.87 ± 0.34 mm at the coronal midpoint section of the pedicles.
CONCLUSIONS: The multistep, patient-specific screw guide template system is useful for intraoperative pedicle screw navigation in the thoracic spine. This simple and economical method can improve the accuracy of pedicle screw insertion and reduce the operating time and radiation exposure of spinal fixation surgery.

Entities:  

Mesh:

Year:  2013        PMID: 23705628     DOI: 10.3171/2013.4.SPINE121059

Source DB:  PubMed          Journal:  J Neurosurg Spine        ISSN: 1547-5646


  32 in total

1.  Pedicle screw placement accuracy in thoracic and lumbar spinal surgery with a patient-matched targeting guide: a cadaveric study.

Authors:  Claudio Lamartina; Riccardo Cecchinato; Zsolt Fekete; Alberto Lipari; Meinrad Fiechter; P Berjano
Journal:  Eur Spine J       Date:  2015-10-23       Impact factor: 3.134

2.  Pull-out strength of patient-specific template-guided vs. free-hand fluoroscopically controlled thoracolumbar pedicle screws: a biomechanical analysis of a randomized cadaveric study.

Authors:  A Aichmair; M Moser; M R Bauer; E Bachmann; J G Snedeker; M Betz; M Farshad
Journal:  Eur Spine J       Date:  2017-03-04       Impact factor: 3.134

3.  Feasibility of laser-guided percutaneous pedicle screw placement in the lumbar spine using a hybrid-OR.

Authors:  P H Richter; F Gebhard; M Salameh; K Schuetze; M Kraus
Journal:  Int J Comput Assist Radiol Surg       Date:  2017-02-10       Impact factor: 2.924

4.  Additive-manufactured patient-specific titanium templates for thoracic pedicle screw placement: novel design with reduced contact area.

Authors:  Mitsuru Takemoto; Shunsuke Fujibayashi; Eigo Ota; Bungo Otsuki; Hiroaki Kimura; Takeshi Sakamoto; Toshiyuki Kawai; Tohru Futami; Kiyoyuki Sasaki; Tomiharu Matsushita; Takashi Nakamura; Masashi Neo; Shuich Matsuda
Journal:  Eur Spine J       Date:  2015-03-29       Impact factor: 3.134

Review 5.  Image once, print thrice? Three-dimensional printing of replacement parts.

Authors:  Timothy M Rankin; Blair A Wormer; John D Miller; Nicholas A Giovinco; Salam Al Kassis; David G Armstrong
Journal:  Br J Radiol       Date:  2018-01-31       Impact factor: 3.039

6.  Lumbar and sacral pedicle screw placement using a template does not improve the midterm pain and disability outcome in comparison with free-hand method.

Authors:  Matjaz Merc; Gregor Recnik; Zmago Krajnc
Journal:  Eur J Orthop Surg Traumatol       Date:  2017-01-19

7.  An automatic and patient-specific algorithm to design the optimal insertion direction of pedicle screws for spine surgery templates.

Authors:  Francesco Naddeo; Emilio Cataldo; Alessandro Naddeo; Nicola Cappetti; Nicola Narciso
Journal:  Med Biol Eng Comput       Date:  2017-02-03       Impact factor: 2.602

8.  Accuracy of patient-specific template-guided vs. free-hand fluoroscopically controlled pedicle screw placement in the thoracic and lumbar spine: a randomized cadaveric study.

Authors:  Mazda Farshad; Michael Betz; Nadja A Farshad-Amacker; Manuel Moser
Journal:  Eur Spine J       Date:  2016-08-09       Impact factor: 3.134

9.  Computer-Based Vertebral Tumor Cryoablation Planning and Procedure Simulation Involving Two Cases Using MRI-Visible 3D Printing and Advanced Visualization.

Authors:  Jeffrey P Guenette; Nathan Himes; Andreas A Giannopoulos; Tatiana Kelil; Dimitris Mitsouras; Thomas C Lee
Journal:  AJR Am J Roentgenol       Date:  2016-08-09       Impact factor: 3.959

Review 10.  Cardiothoracic Applications of 3-dimensional Printing.

Authors:  Andreas A Giannopoulos; Michael L Steigner; Elizabeth George; Maria Barile; Andetta R Hunsaker; Frank J Rybicki; Dimitris Mitsouras
Journal:  J Thorac Imaging       Date:  2016-09       Impact factor: 3.000

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.