Literature DB >> 23675992

Vertical osteoconductive characteristics of titanium implants with calcium-phosphate-coated surfaces - a pilot study in rabbits.

Eik Schiegnitz1, Victor Palarie, Viorel Nacu, Bilal Al-Nawas, Peer Wolfgang Kämmerer.   

Abstract

INTRODUCTION: Osteoconductive characteristics of different implant surface coatings are in the focus of current interest. The aim of the present study was to compare the vertical osteoconductivity at the implant shoulder of supracrestal inserted calcium-phosphate coated implants (SLA-CaP) with conventional sand-blasted/acid-etched (SLA) implants in a rabbit model.
MATERIALS AND METHODS: SLA-CaP and SLA implants were inserted bilaterally in the mandible of four rabbits in a split-mouth design. The implants were placed 2 mm supracrestal. After 3 weeks, at the left and right implant shoulder, the percentage of linear bone fill (PLF) as well as bone-implant contact (BIC-D) were determined.
RESULTS: After 3 weeks, newly formed woven bone could be found at the shoulder of the most of both surface-treated implants (75%). PLF was significantly higher in SLA-CaP implants (11.2% vs. 46.5%; n = 8, p = .008). BIC-D was significantly increased in the SLA-CaP implants (13.0% vs. 71.4%; n = 8, p < .001) as well.
CONCLUSION: The results of this study show for the first time that calcium-phosphate coated surfaces on supracrestal inserted implants have vertical osteoconductive characteristics and increase the bone-implant contact at the implant shoulder significantly in a rabbit model. In clinical long-term settings, these implants may contribute to a better vertical bone height.
© 2012 Wiley Periodicals, Inc.

Entities:  

Keywords:  animal study; calcium-phosphate; implant; osteoconductive characteristics

Mesh:

Substances:

Year:  2014        PMID: 23675992     DOI: 10.1111/j.1708-8208.2012.00469.x

Source DB:  PubMed          Journal:  Clin Implant Dent Relat Res        ISSN: 1523-0899            Impact factor:   3.932


  6 in total

1.  Performance of laser sintered Ti-6Al-4V implants with bone-inspired porosity and micro/nanoscale surface roughness in the rabbit femur.

Authors:  David J Cohen; Alice Cheng; Kaan Sahingur; Ryan M Clohessy; Louis B Hopkins; Barbara D Boyan; Zvi Schwartz
Journal:  Biomed Mater       Date:  2017-04-28       Impact factor: 3.715

2.  Evaluation of miniscrew stability using an automatic embedding auxiliary skeletal anchorage device.

Authors:  Yasuhiko Oga; Hiroshi Tomonari; Sangho Kwon; Takaharu Kuninori; Takakazu Yagi; Shouichi Miyawaki
Journal:  Angle Orthod       Date:  2018-09-01       Impact factor: 2.079

3.  Stem cell-mediated functionalization of titanium implants.

Authors:  Deanna Ingrassia; Martina Sladkova; Michael Palmer; Wei Xia; Håkan Engqvist; Giuseppe Maria de Peppo
Journal:  J Mater Sci Mater Med       Date:  2017-07-25       Impact factor: 3.896

4.  Osseointegration of a New, Ultrahydrophilic and Nanostructured Dental Implant Surface: A Comparative In Vivo Study.

Authors:  Andreas Pabst; Ashraf Asran; Steffen Lüers; Markus Laub; Christopher Holfeld; Victor Palarie; Daniel G E Thiem; Philipp Becker; Amely Hartmann; Diana Heimes; Bilal Al-Nawas; Peer W Kämmerer
Journal:  Biomedicines       Date:  2022-04-19

5.  Guided Bone Regeneration Using Collagen Scaffolds, Growth Factors, and Periodontal Ligament Stem Cells for Treatment of Peri-Implant Bone Defects In Vivo.

Authors:  Peer W Kämmerer; Malte Scholz; Maria Baudisch; Jan Liese; Katharina Wegner; Bernhard Frerich; Hermann Lang
Journal:  Stem Cells Int       Date:  2017-08-16       Impact factor: 5.443

6.  Vertical osteoconductivity of sputtered hydroxyapatite-coated mini titanium implants after dura mater elevation: Rabbit calvarial model.

Authors:  Xin Wang; Osama Zakaria; Marwa Madi; Shohei Kasugai
Journal:  J Tissue Eng       Date:  2015-06-30       Impact factor: 7.813

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.