Literature DB >> 23575563

Reliability of templating with patient-specific instrumentation in total knee arthroplasty.

Kimona Issa1, Aiman Rifai, Mike S McGrath, John J Callaghan, Craig Wright, Arthur L Malkani, Michael A Mont, Vincent K McInerney.   

Abstract

Magnetic resonance imaging (MRI) or computed tomography-based patient-specific instrumentation (PSI) may allow for reliable alignment and fewer outliers when compared with conventionally instrumented total knee arthroplasty (TKA). However, some authors have suggested that frequent intraoperative surgeon-directed changes may still be required. This study evaluated the accuracy of PSI to predict component sizing and alignment during TKA. A total of 84 patients (89 knees) who underwent a TKA using a PSI system were evaluated. An MRI-based preoperative plan of every knee was provided and approved by the surgeons. This demonstrated the proposed prosthetic component alignment, as well as the femoral, tibial, and bearing insert component size and position. Intraoperative changes to these components were prospectively recorded and compared with the computerized preoperative plan. Major changes were defined as any changes in femoral or tibial resection, size, and position of the components. Minor changes were defined as any change in the size of the polyethylene bearing insert. The preoperative plan was able to correctly predict the size of the implanted tibial and femoral component in 93 and 95.5% of the cases, respectively. Thirteen major intraoperative changes were made. In one knee, the proposed femoral resection was not acceptable (because of the presence of significant amount of osteophytes) and was abandoned in favor of a manual extramedullary guide. In another patient, the proposed femoral and tibial components were upsized. In two other patients, the femoral components were downsized, in four patients, the tibial components were downsized, and in another patient, it was upsized. There were also 16 minor changes, which included 2-mm upsizing of the polyethylene liner in 13 knees and 4-mm upsizing in 3 knees. Surgical experience is necessary to recognize improper component size, incorrect surgical resection, or nonideal alignment when performing TKA using PSI. The authors believe that the design and manufacture of PSI combined with a comprehensive templating resulted in excellent intraoperative concordance of the preoperative plan at the default settings with minimal changes. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Entities:  

Mesh:

Year:  2013        PMID: 23575563     DOI: 10.1055/s-0033-1343615

Source DB:  PubMed          Journal:  J Knee Surg        ISSN: 1538-8506            Impact factor:   2.757


  15 in total

1.  The accuracy of bony resection from patient-specific guides during total knee arthroplasty.

Authors:  Yadin D Levy; Vincent V G An; Christopher J W Shean; Floris R Groen; Peter M Walker; Warwick J M Bruce
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2016-08-04       Impact factor: 4.342

2.  [Total knee arthroplasty with 3D printing technique versus conventional surgery: comparison of the outcomes].

Authors:  Ming Niu; Fei Ma; Ju-Rong Ma; Jun-Wei Li; Xu-Nian Wu; Tong Wang; Yu-Liang Wang
Journal:  Nan Fang Yi Ke Da Xue Xue Bao       Date:  2017-11-20

3.  Revision of partial knee to total knee arthroplasty with use of patient-specific instruments results in acceptable femoral rotation.

Authors:  Martijn G M Schotanus; Elke Thijs; B Boonen; B Kerens; B Jong; Nanne P Kort
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2017-08-07       Impact factor: 4.342

Review 4.  Favourable alignment outcomes with MRI-based patient-specific instruments in total knee arthroplasty.

Authors:  Martijn G M Schotanus; Elke Thijs; Marion Heijmans; Rein Vos; Nanne P Kort
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2017-07-11       Impact factor: 4.342

5.  Patient-specific instruments for total knee arthroplasty can accurately predict the component size as used peroperative.

Authors:  Martijn G M Schotanus; Daphne A L Schoenmakers; Rob Sollie; Nanne P Kort
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2016-10-05       Impact factor: 4.342

Review 6.  Systematic review of patient-specific instrumentation in total knee arthroplasty: new but not improved.

Authors:  Adam Sassoon; Denis Nam; Ryan Nunley; Robert Barrack
Journal:  Clin Orthop Relat Res       Date:  2015-01       Impact factor: 4.176

7.  Significant differences between manufacturer and surgeon in the accuracy of final component size prediction with CT-based patient-specific instrumentation for total knee arthroplasty.

Authors:  Davide Cucchi; Alessandra Menon; Riccardo Compagnoni; Paolo Ferrua; Chiara Fossati; Pietro Randelli
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2018-02-16       Impact factor: 4.342

8.  Patient-specific total knee arthroplasty: the importance of planning by the surgeon.

Authors:  M Pietsch; O Djahani; M Hochegger; F Plattner; S Hofmann
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2013-08-13       Impact factor: 4.342

Review 9.  3D-printing techniques in a medical setting: a systematic literature review.

Authors:  Philip Tack; Jan Victor; Paul Gemmel; Lieven Annemans
Journal:  Biomed Eng Online       Date:  2016-10-21       Impact factor: 2.819

10.  Patient-specific mental rehearsal with interactive visual aids: a path worth exploring?

Authors:  Marina Yiasemidou; Raffaele Galli; Daniel Glassman; Matthew Tang; Rahoz Aziz; David Jayne; Danilo Miskovic
Journal:  Surg Endosc       Date:  2017-08-24       Impact factor: 4.584

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.