OBJECTIVE: This study evaluated the effect of the margin location and an adhesive system on the marginal adaptation of composite restorations. MATERIAL AND METHODS: Class V cavities were prepared in bovine teeth with the gingival margin on the dentin and the incisal margin on the enamel. The cavities were restored with a micro-hybrid composite resin using an etch-and-rinse [Single Bond 2 (SB)] or a self-etching adhesive [Clearfil SE Bond (CL)]. After finishing and polishing the restorations, epoxy replicas were prepared. The marginal adaptation was analyzed using scanning electronic microscopy (SEM, 500 x magnification). The higher gap width in each margin was recorded (T0). After the first evaluation, the samples were submitted to thermal cycling (2,000 cycles of 5°C±2°C followed by 55°C±2°C - T1) and mechanical cycling (100,000 cycles of 50 kN and 2 Hz - T2). Replicas of samples were rebuilt after each cycling and analyzed under SEM. The data were submitted to Mann-Whitney, Wilcoxon and Friedman testing (α=0.05). RESULTS: The SB presented higher gaps in the dentin than the enamel, while there was no difference between the substrate for the CL. In the dentin, the CL showed better marginal sealing than the SB. The opposite occurred in the enamel. There were no significant differences between the baseline, thermal and mechanical cycling for any experimental condition. CONCLUSIONS: The outcomes of the present study showed that the adhesive system and margin location have an important effect on the marginal adaptation of composite restorations.
OBJECTIVE: This study evaluated the effect of the margin location and an adhesive system on the marginal adaptation of composite restorations. MATERIAL AND METHODS: Class V cavities were prepared in bovine teeth with the gingival margin on the dentin and the incisal margin on the enamel. The cavities were restored with a micro-hybrid composite resin using an etch-and-rinse [Single Bond 2 (SB)] or a self-etching adhesive [Clearfil SE Bond (CL)]. After finishing and polishing the restorations, epoxy replicas were prepared. The marginal adaptation was analyzed using scanning electronic microscopy (SEM, 500 x magnification). The higher gap width in each margin was recorded (T0). After the first evaluation, the samples were submitted to thermal cycling (2,000 cycles of 5°C±2°C followed by 55°C±2°C - T1) and mechanical cycling (100,000 cycles of 50 kN and 2 Hz - T2). Replicas of samples were rebuilt after each cycling and analyzed under SEM. The data were submitted to Mann-Whitney, Wilcoxon and Friedman testing (α=0.05). RESULTS: The SB presented higher gaps in the dentin than the enamel, while there was no difference between the substrate for the CL. In the dentin, the CL showed better marginal sealing than the SB. The opposite occurred in the enamel. There were no significant differences between the baseline, thermal and mechanical cycling for any experimental condition. CONCLUSIONS: The outcomes of the present study showed that the adhesive system and margin location have an important effect on the marginal adaptation of composite restorations.
Authors: Silvia Kenshima; Rosa Helena Miranda Grande; Julio da Motta Singer; Rafael Yagüe Ballester Journal: J Appl Oral Sci Date: 2004-12 Impact factor: 2.698
Authors: Sérgio Lima Santiago; Vanara Florêncio Passos; Alessandra Helen Magacho Vieira; Maria Fidela de Lima Navarro; José Roberto Pereira Lauris; Eduardo Batista Franco Journal: Braz Dent J Date: 2010
Authors: Mario Bernardo; Henrique Luis; Michael D Martin; Brian G Leroux; Tessa Rue; Jorge Leitão; Timothy A DeRouen Journal: J Am Dent Assoc Date: 2007-06 Impact factor: 3.634
Authors: Farid Mohammed Sabry El-Askary; Mohammed Salah Abdelaziz Nassif; Andrea Mello Andrade; Alessandra Reis; Alessandro Dourado Loguercio Journal: Braz Oral Res Date: 2012-07-19
Authors: Yan Wang; Zhengyu Liao; Dan Liu; Zhan Liu; Grant T McIntyre; Fan Jian; Wei Lv; Jinbo Yang; Zhihe Zhao; Wenli Lai Journal: Am J Dent Date: 2011-02 Impact factor: 1.522
Authors: Milena Cadenaro; Lorenzo Breschi; Frederick A Rueggeberg; Michael Suchko; Evan Grodin; Kelli Agee; Roberto Di Lenarda; Franklin R Tay; David H Pashley Journal: Dent Mater Date: 2008-12-25 Impact factor: 5.304
Authors: Carlos Alberto Kenji Shimokawa; Paula Mendes Acatauassú Carneiro; Tamile Rocha da Silva Lobo; Victor Elias Arana-Chavez; Michel Nicolau Youssef; Míriam Lacalle Turbino Journal: Int Dent J Date: 2016-04-08 Impact factor: 2.607