Literature DB >> 23525946

Extraction of short-chain-length poly-[(R)-hydroxyalkanoates] (scl-PHA) by the "anti-solvent" acetone under elevated temperature and pressure.

Martin Koller1, Rodolfo Bona, Emo Chiellini, Gerhart Braunegg.   

Abstract

A novel method was developed for extraction of short-chain-length poly(hydroxyalkanoates) (scl-PHA) from microbial biomass by the well-known "scl-PHA anti-solvent" acetone at elevated temperature and pressure in a closed system combining components for extraction, filtration, and product work-up. Recovery of scl-PHA using this new approach was compared with established methods using chloroform at ambient pressure. The new method performs similar regarding product purity (98.4 vs. 97.7%) and extraction yield (96.8% by both methods), and is by far faster than established chloroform extraction (20 min vs. 12 h). Separation of the polymer from acetone is simply achieved by cooling down the acetone solution of scl-PHA, thus allows for a nearly quantitative recovery of the solvent that conveniently can be reused. Characterization of scl-PHA extracted by both methods does not reveal any significant difference in terms of molar mass and thermo analytical parameters.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23525946     DOI: 10.1007/s10529-013-1185-7

Source DB:  PubMed          Journal:  Biotechnol Lett        ISSN: 0141-5492            Impact factor:   2.461


  7 in total

1.  Combination of Hypotonic Lysis and Application of Detergent for Isolation of Polyhydroxyalkanoates from Extremophiles.

Authors:  Ivana Novackova; Xenie Kourilova; Katerina Mrazova; Petr Sedlacek; Michal Kalina; Vladislav Krzyzanek; Martin Koller; Stanislav Obruca
Journal:  Polymers (Basel)       Date:  2022-04-26       Impact factor: 4.967

2.  Poly(hydroxy alkanoate)s in Medical Applications.

Authors:  K P Luef; F Stelzer; F Wiesbrock
Journal:  Chem Biochem Eng Q       Date:  2015       Impact factor: 1.582

Review 3.  Recent Advances and Challenges towards Sustainable Polyhydroxyalkanoate (PHA) Production.

Authors:  Constantina Kourmentza; Jersson Plácido; Nikolaos Venetsaneas; Anna Burniol-Figols; Cristiano Varrone; Hariklia N Gavala; Maria A M Reis
Journal:  Bioengineering (Basel)       Date:  2017-06-11

Review 4.  Polyhydroxyalkanoates (PHAs) as Biomaterials in Tissue Engineering: Production, Isolation, Characterization.

Authors:  Dana-Maria Miu; Mihaela Carmen Eremia; Misu Moscovici
Journal:  Materials (Basel)       Date:  2022-02-14       Impact factor: 3.623

Review 5.  Development and Advantages of Biodegradable PHA Polymers Based on Electrospun PHBV Fibers for Tissue Engineering and Other Biomedical Applications.

Authors:  Łukasz Kaniuk; Urszula Stachewicz
Journal:  ACS Biomater Sci Eng       Date:  2021-10-14

6.  Effect of 3-Hydroxyvalerate Content on Thermal, Mechanical, and Rheological Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopolymers Produced from Fermented Dairy Manure.

Authors:  Maryam Abbasi; Dikshya Pokhrel; Erik R Coats; Nicholas M Guho; Armando G McDonald
Journal:  Polymers (Basel)       Date:  2022-10-03       Impact factor: 4.967

Review 7.  Biodegradable and Biocompatible Polyhydroxy-alkanoates (PHA): Auspicious Microbial Macromolecules for Pharmaceutical and Therapeutic Applications.

Authors:  Martin Koller
Journal:  Molecules       Date:  2018-02-08       Impact factor: 4.411

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.