In-phantom calibration of Selectron-LDR sources.

Source strength measurements were performed for cesium-137 spherical sources of nine Selectron-LDR remote afterloading systems in The Netherlands. The mean reference air kerma rate of a set of sources was obtained from air kerma rate measurements in a phantom at a distance of about 5.5 cm from a large number (24 to 30) of sources. The results were compared with the source strengths specified by the manufacturer. Discrepancies between measured and manufacturers data ranging from -2.3% to +3.9% were observed. The frequency distribution of the strength of the sources within a set was measured by the use of a well-type ionisation chamber. The root mean square deviations of the nine source sets ranged from 1.0 to 3.2%. Application of the in-phantom calibration method would improve the precision of source strength measurements and therefore reduce the differences in dose delivery between institutes. The uncertainty of the in-phantom method, which could be estimated by statistical methods, was 0.3% (one standard deviation). That part of the uncertainty, which could not be evaluated by statistical methods, was estimated to be about 1.2% (one effective standard deviation). This latter part in the uncertainty needs further investigation in order to reduce the overall uncertainty.