Literature DB >> 23398970

Application of a mechanobiological simulation technique to stents used clinically.

Colin J Boyle1, Alex B Lennon, Patrick J Prendergast.   

Abstract

Many cardiovascular diseases are characterised by the restriction of blood flow through arteries. Stents can be expanded within arteries to remove such restrictions; however, tissue in-growth into the stent can lead to restenosis. In order to predict the long-term efficacy of stenting, a mechanobiological model of the arterial tissue reaction to stress is required. In this study, a computational model of arterial tissue response to stenting is applied to three clinically relevant stent designs. We ask the question whether such a mechanobiological model can differentiate between stents used clinically, and we compare these predictions to a purely mechanical analysis. In doing so, we are testing the hypothesis that a mechanobiological model of arterial tissue response to injury could predict the long-term outcomes of stent design. Finite element analysis of the expansion of three different stent types was performed in an idealised, 3D artery. Injury was calculated in the arterial tissue using a remaining-life damage mechanics approach. The inflammatory response to this initial injury was modelled using equations governing variables which represented tissue-degrading species and growth factors. Three levels of inflammation response were modelled to account for inter-patient variability. A lattice-based model of smooth muscle cell behaviour was implemented, treating cells as discrete agents governed by local rules. The simulations predicted differences between stent designs similar to those found in vivo. It showed that the volume of neointima produced could be quantified, providing a quantitative comparison of stents. In contrast, the differences between stents based on stress alone were highly dependent on the choice of comparison criteria. These results show that the choice of stress criteria for stent comparisons is critical. This study shows that mechanobiological modelling may provide a valuable tool in stent design, allowing predictions of their long-term efficacy. The level of inflammation was shown to affect the sensitivity of the model to stent design. If this finding was verified in patients, this could suggest that high-inflammation patients may require alternative treatments to stenting.
Copyright © 2013 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Year:  2013        PMID: 23398970     DOI: 10.1016/j.jbiomech.2012.12.014

Source DB:  PubMed          Journal:  J Biomech        ISSN: 0021-9290            Impact factor:   2.712


  10 in total

1.  Mathematical modelling of the restenosis process after stent implantation.

Authors:  Javier Escuer; Miguel A Martínez; Sean McGinty; Estefanía Peña
Journal:  J R Soc Interface       Date:  2019-08-14       Impact factor: 4.118

2.  A Multiscale Computational Framework to Understand Vascular Adaptation.

Authors:  Marc Garbey; Mahbubur Rahman; Scott A Berceli
Journal:  J Comput Sci       Date:  2015-05-01

3.  Mechanobiological model of arterial growth and remodeling.

Authors:  Maziyar Keshavarzian; Clark A Meyer; Heather N Hayenga
Journal:  Biomech Model Mechanobiol       Date:  2017-08-19

4.  A chemo-mechano-biological formulation for the effects of biochemical alterations on arterial mechanics: the role of molecular transport and multiscale tissue remodelling.

Authors:  Michele Marino; Giuseppe Pontrelli; Giuseppe Vairo; Peter Wriggers
Journal:  J R Soc Interface       Date:  2017-11       Impact factor: 4.118

5.  Direct comparison of coronary bare metal vs. drug-eluting stents: same platform, different mechanics?

Authors:  Wolfram Schmidt; Peter Lanzer; Peter Behrens; Christoph Brandt-Wunderlich; Alper Öner; Hüseyin Ince; Klaus-Peter Schmitz; Niels Grabow
Journal:  Eur J Med Res       Date:  2018-01-08       Impact factor: 2.175

6.  A Comparison of Fully-Coupled 3D In-Stent Restenosis Simulations to In-vivo Data.

Authors:  Pavel S Zun; Tatiana Anikina; Andrew Svitenkov; Alfons G Hoekstra
Journal:  Front Physiol       Date:  2017-05-23       Impact factor: 4.566

7.  Uncertainty Quantification of a Multiscale Model for In-Stent Restenosis.

Authors:  Anna Nikishova; Lourens Veen; Pavel Zun; Alfons G Hoekstra
Journal:  Cardiovasc Eng Technol       Date:  2018-08-22       Impact factor: 2.495

8.  Location-Specific Comparison Between a 3D In-Stent Restenosis Model and Micro-CT and Histology Data from Porcine In Vivo Experiments.

Authors:  P S Zun; A J Narracott; C Chiastra; J Gunn; A G Hoekstra
Journal:  Cardiovasc Eng Technol       Date:  2019-09-17       Impact factor: 2.495

9.  Mechanistic evaluation of long-term in-stent restenosis based on models of tissue damage and growth.

Authors:  Ran He; Liguo Zhao; Vadim V Silberschmidt; Yang Liu
Journal:  Biomech Model Mechanobiol       Date:  2020-01-07

10.  Computational and experimental mechanical performance of a new everolimus-eluting stent purpose-built for left main interventions.

Authors:  Saurabhi Samant; Wei Wu; Shijia Zhao; Behram Khan; Mohammadali Sharzehee; Anastasios Panagopoulos; Janaki Makadia; Timothy Mickley; Andrew Bicek; Dennis Boismier; Yoshinobu Murasato; Yiannis S Chatzizisis
Journal:  Sci Rep       Date:  2021-04-22       Impact factor: 4.379

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.