Literature DB >> 23228497

Color stability, conversion, water sorption and solubility of dental composites formulated with different photoinitiator systems.

Pedro Paulo A C Albuquerque1, Allana D L Moreira, Rafael R Moraes, Larissa M Cavalcante, Luis Felipe J Schneider.   

Abstract

OBJECTIVES: The aim of this study was to formulate materials with high color stability and reduced degradation by using photoinitiator systems derived from phosphine oxides alternative to the traditional camphorquinone (CQ)/amine system.
METHODS: Materials were formulated with the monomers BisGMA and TEGDMA as organic matrix. The photoinitiators tested were CQ+amine (EDMAB), phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide (BAPO), BAPO+EDMAB, diphenyl(2,4,6-trimethylbenzoyl)-phosphine oxide (TPO) and TPO+EDMAB. A 60% mass of silanated glass filler particles was added. Degree of CC conversion was evaluated by Fourier-transformed infrared spectroscopy 10min after photopolymerization. The color properties were evaluated by a digital spectrophotometer, applying the CIELab parameters, either before photoactivation, immediately after photoactivation, 24h after dry storage, and one month after water immersion. Water sorption and solubility were assessed by mass gain or loss after storage in water for 30 days. Data were analyzed using ANOVA and Tukey's test (5%).
RESULTS: Degree of conversion did not differ statistically among all the tested formulations. Regarding color, only groups with TPO presented satisfactory color stability after one month of water storage (ΔE<3.3). Water sorption and water stability did not differ among the groups.
CONCLUSIONS: Degree of conversion, water sorption and water solubility did not differ among all the tested groups. The TPO-based groups were the only materials with satisfactory color stability after one month of water storage. CLINICAL SIGNIFICANCE: The use of a photoinitiator system containing TPO might improve the color stability of resin composites compared with the traditional CQ/amine system while attaining similar physico-chemical properties for the composite.
Copyright © 2012 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Camphorquinone; Dental composites; FTIR spectroscopy; Phosphine oxides; Photosensitizers; Polymerization

Mesh:

Substances:

Year:  2012        PMID: 23228497     DOI: 10.1016/j.jdent.2012.11.020

Source DB:  PubMed          Journal:  J Dent        ISSN: 0300-5712            Impact factor:   4.379


  11 in total

1.  Effect of two lasers on the polymerization of composite resins: single vs combination.

Authors:  Jung-Hoon Ro; Sung-Ae Son; Jeong-kil Park; Gye-Rok Jeon; Ching-Chang Ko; Yong Hoon Kwon
Journal:  Lasers Med Sci       Date:  2015-04-17       Impact factor: 3.161

2.  Functionalized pink Al2O3:Mn pigments applied in prosthetic dentistry.

Authors:  Mário Thadeo R Cruzeiro; Fernando A Moraes; Marina R Kaizer; Mário Lúcio Moreira; Yu Zhang; Rafael R Moraes; Sergio S Cava
Journal:  J Prosthet Dent       Date:  2017-04-03       Impact factor: 3.426

3.  Remineralization of caries-affected dentin and color stability of teeth restored after treatment with silver diamine fluoride and bioactive glass-ceramic.

Authors:  Adriana Cavalcanti Ferreira; Rebeca Franco de Lima Oliveira; Ayodele Alves Amorim; Rocio Geng-Vivanco; Fernanda de Carvalho Panzeri Pires-de-Souza
Journal:  Clin Oral Investig       Date:  2022-03-17       Impact factor: 3.606

4.  Non-silicate nanoparticles for improved nanohybrid resin composites.

Authors:  Leina Nakanishi; Marina R Kaizer; Suzane Brandeburski; Sergio S Cava; Alvaro Della Bona; Yu Zhang; Rafael R Moraes
Journal:  Dent Mater       Date:  2020-08-03       Impact factor: 5.304

5.  Evaluation of phenyl-propanedione on yellowing and chemical-mechanical properties of experimental dental resin-based materials.

Authors:  Dayane Carvalho Ramos Salles de Oliveira; Eduardo José Souza-Junior; Adam Dobson; Ana Rosa Costa Correr; William Cunha Brandt; Mário Alexandre Coelho Sinhoreti
Journal:  J Appl Oral Sci       Date:  2016 Nov-Dec       Impact factor: 2.698

6.  Mechanical properties of experimental resin cements containing different photoinitiators and co-initiators.

Authors:  Carla Dos Reis Lima; Danilo Bandeira da Silva; Rafael Pino Vitti; Milton Edson Miranda; William Cunha Brandt
Journal:  Clin Cosmet Investig Dent       Date:  2019-08-29

Review 7.  Moving Towards a Finer Way of Light-Cured Resin-Based Restorative Dental Materials: Recent Advances in Photoinitiating Systems Based on Iodonium Salts.

Authors:  Monika Topa; Joanna Ortyl
Journal:  Materials (Basel)       Date:  2020-09-15       Impact factor: 3.623

8.  The effect of 4,4'-bis(N,N-diethylamino) benzophenone on the degree of conversion in liquid photopolymer for dental 3D printing.

Authors:  Du-Hyeong Lee; Hang Nga Mai; Jin-Chul Yang; Tae-Yub Kwon
Journal:  J Adv Prosthodont       Date:  2015-10-28       Impact factor: 1.904

Review 9.  Water-Soluble Photoinitiators in Biomedical Applications.

Authors:  Wiktoria Tomal; Joanna Ortyl
Journal:  Polymers (Basel)       Date:  2020-05-07       Impact factor: 4.329

10.  Rapid Fabrication of Sterile Medical Nasopharyngeal Swabs by Stereolithography for Widespread Testing in a Pandemic.

Authors:  Louis A van der Elst; Merve Gokce Kurtoglu; Troy Leffel; Mengxin Zheng; Alexander Gumennik
Journal:  Adv Eng Mater       Date:  2020-10-21       Impact factor: 4.122

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.