Literature DB >> 23218260

Development of biodegradable flexible films of starch and poly(lactic acid) plasticized with adipate or citrate esters.

M A Shirai1, M V E Grossmann, S Mali, F Yamashita, P S Garcia, C M O Müller.   

Abstract

Biodegradable films were produced from blends contained a high amount of thermoplastic starch (TPS) and poly(lactic acid) (PLA) plasticized with different adipate or citrate esters. It was not possible to obtain pellets for the production of films using only glycerol as a plasticizer. The plasticization of the PLA with the esters and mixture stages added through extrusion was critical to achieve a blend capable of producing films by blow extrusion. Adipate esters were the most effective plasticizers because they interacted best with the PLA and yielded films with appropriate mechanical properties.
Copyright © 2012 Elsevier Ltd. All rights reserved.

Entities:  

Mesh：

Substances：

Year:  2012        PMID： 23218260     DOI： 10.1016/j.carbpol.2012.09.038

Source DB:  PubMed          Journal:  Carbohydr Polym        ISSN： 0144-8617            Impact factor:   9.381


  10 in total

1.  Biodegradable packaging materials conception based on starch and polylactic acid (PLA) reinforced with cellulose.

Authors:  Fatma Masmoudi; Atef Bessadok; Mohamed Dammak; Mohamed Jaziri; Emna Ammar
Journal:  Environ Sci Pollut Res Int       Date:  2016-08-03       Impact factor: 4.223

2.  Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (arenga pinnata) starch for food packaging.

Authors:  M L Sanyang; S M Sapuan; M Jawaid; M R Ishak; J Sahari
Journal:  J Food Sci Technol       Date:  2015-09-16       Impact factor: 2.701

Review 3.  Tailoring the Barrier Properties of PLA: A State-of-the-Art Review for Food Packaging Applications.

Authors:  Stefania Marano; Emiliano Laudadio; Cristina Minnelli; Pierluigi Stipa
Journal:  Polymers (Basel)       Date:  2022-04-18       Impact factor: 4.967

Review 4.  Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging.

Authors:  Justine Muller; Chelo González-Martínez; Amparo Chiralt
Journal:  Materials (Basel)       Date:  2017-08-15       Impact factor: 3.623

5.  Development of Polylactic Acid Thermoplastic Starch Formulations Using Maleinized Hemp Oil as Biobased Plasticizer.

Authors:  Alejandro Lerma-Canto; Jaume Gomez-Caturla; María Herrero-Herrero; Daniel Garcia-Garcia; Vicent Fombuena
Journal:  Polymers (Basel)       Date:  2021-04-25       Impact factor: 4.329

Review 6.  A Review of Biopolymers' Utility as Emulsion Stabilizers.

Authors:  Nirmala Tamang; Pooja Shrestha; Binita Khadka; Monohar Hossain Mondal; Bidyut Saha; Ajaya Bhattarai
Journal:  Polymers (Basel)       Date:  2021-12-30       Impact factor: 4.329

7.  Effect of surfactant content on rheological, thermal, morphological and surface properties of thermoplastic starch (TPS) and polylactic acid (PLA) blends.

Authors:  Heidy Lorena Calambás Pulgarin; Carolina Caicedo; Edwin Flórez López
Journal:  Heliyon       Date:  2022-10-01

8.  Effect of glycerol plasticizer loading on the physical, mechanical, thermal, and barrier properties of arrowroot (Maranta arundinacea) starch biopolymers.

Authors:  J Tarique; S M Sapuan; A Khalina
Journal:  Sci Rep       Date:  2021-07-06       Impact factor: 4.379

9.  Plasticizer Enhancement on the Miscibility and Thermomechanical Properties of Polylactic Acid-Chitin-Starch Composites.

Authors:  Indra Surya; N G Olaiya; Samsul Rizal; Ikramullah Zein; N A Sri Aprilia; M Hasan; Esam Bashir Yahya; K K Sadasivuni; H P S Abdul Khalil
Journal:  Polymers (Basel)       Date:  2020-01-05       Impact factor: 4.329

10.  Starch/Alkane Diol Materials: Unexpected Ultraporous Surfaces, Near-Isoporous Cores, and Films Moving on Water.

Authors:  Hüsamettin D Özeren; Antonio J Capezza; Samy Gharbi; Manon Guivier; Fritjof Nilsson; Richard T Olsson; Mikael S Hedenqvist
Journal:  ACS Omega       Date:  2020-10-30
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.