Aromatic amines from polyurethane adhesives in food packaging: the challenge of identification and pattern recognition using Quadrupole-Time of Flight-Mass SpectrometryE.

Toxic primary aromatic amines (PAAs) are reaction products from residual isocyanates in polyurethane adhesives. The maximum migration level of the total sum of PAAs is 10 ng g(-1) of food. This paper reports on a method for quantification of 18 PAAs by UHPLC-MS/MS that was optimised and applied to a series of industrial laminates prepared from polyurethane adhesives. Non-intentionally added substances (NIAS), impurities and other migrants were identified by Q-TOF/MS(E). A comparison of the quantitative values obtained by the colorimetric method using NEDA and by UHPLC-MS/MS confirmed that the first method can overestimate the quantification of PAAs. This could be attributed to the impurities and other NIAS present in the plastic laminate. Values of R(2) in the analytical characteristics of UHPLC-MS/MS were obtained, the best value being 0.9964 and the most unfavourable 0.7626. The detection limit (LOD) and the quantification limit (LOQ) were 2 pg g(-1) and 7 pg g(-1), respectively. The stability of the PAAs over time in the acidic simulant in contact with the plastic laminate is also reported.