Literature DB >> 23027200

A viscoelastic constitutive model can accurately represent entire creep indentation tests of human patella cartilage.

Kathryn E Keenan1, Saikat Pal, Derek P Lindsey, Thor F Besier, Gary S Beaupre.   

Abstract

Cartilage material properties provide important insights into joint health, and cartilage material models are used in whole-joint finite element models. Although the biphasic model representing experimental creep indentation tests is commonly used to characterize cartilage, cartilage short-term response to loading is generally not characterized using the biphasic model. The purpose of this study was to determine the short-term and equilibrium material properties of human patella cartilage using a viscoelastic model representation of creep indentation tests. We performed 24 experimental creep indentation tests from 14 human patellar specimens ranging in age from 20 to 90 years (median age 61 years). We used a finite element model to reproduce the experimental tests and determined cartilage material properties from viscoelastic and biphasic representations of cartilage. The viscoelastic model consistently provided excellent representation of the short-term and equilibrium creep displacements. We determined initial elastic modulus, equilibrium elastic modulus, and equilibrium Poisson's ratio using the viscoelastic model. The viscoelastic model can represent the short-term and equilibrium response of cartilage and may easily be implemented in whole-joint finite element models.

Entities:  

Mesh:

Year:  2012        PMID: 23027200      PMCID: PMC3896388          DOI: 10.1123/jab.29.3.292

Source DB:  PubMed          Journal:  J Appl Biomech        ISSN: 1065-8483            Impact factor:   1.833


  40 in total

1.  Indentation tests of human articular cartilage.

Authors:  R Y Hori; L F Mockros
Journal:  J Biomech       Date:  1976       Impact factor: 2.712

2.  A mathematical analysis for indentation tests of articular cartilage.

Authors:  W C Hayes; L M Keer; G Herrmann; L F Mockros
Journal:  J Biomech       Date:  1972-09       Impact factor: 2.712

3.  The determination of a creep modulus for articular cartilage from indentation tests of the human femoral head.

Authors:  G E Kempson; M A Freeman; S A Swanson
Journal:  J Biomech       Date:  1971-07       Impact factor: 2.712

4.  Viscoelastic properties of human articular cartilage.

Authors:  W C Hayes; L F Mockros
Journal:  J Appl Physiol       Date:  1971-10       Impact factor: 3.531

5.  Biphasic creep and stress relaxation of articular cartilage in compression? Theory and experiments.

Authors:  V C Mow; S C Kuei; W M Lai; C G Armstrong
Journal:  J Biomech Eng       Date:  1980-02       Impact factor: 2.097

6.  Experimental verification of the roles of intrinsic matrix viscoelasticity and tension-compression nonlinearity in the biphasic response of cartilage.

Authors:  Chun-Yuh Huang; Michael A Soltz; Monika Kopacz; Van C Mow; Gerard A Ateshian
Journal:  J Biomech Eng       Date:  2003-02       Impact factor: 2.097

7.  Biphasic poroviscoelastic characteristics of proteoglycan-depleted articular cartilage: simulation of degeneration.

Authors:  Mark R DiSilvestro; Jun-Kyo Francis Suh
Journal:  Ann Biomed Eng       Date:  2002-06       Impact factor: 3.934

8.  Biphasic indentation of articular cartilage--I. Theoretical analysis.

Authors:  A F Mak; W M Lai; V C Mow
Journal:  J Biomech       Date:  1987       Impact factor: 2.712

9.  Influences of mechanical stress on prenatal and postnatal skeletal development.

Authors:  D R Carter; T E Orr; D P Fyhrie; D J Schurman
Journal:  Clin Orthop Relat Res       Date:  1987-06       Impact factor: 4.176

10.  The apparent viscoelastic behavior of articular cartilage--the contributions from the intrinsic matrix viscoelasticity and interstitial fluid flows.

Authors:  A F Mak
Journal:  J Biomech Eng       Date:  1986-05       Impact factor: 2.097

View more
  5 in total

Review 1.  Subject-specific analysis of joint contact mechanics: application to the study of osteoarthritis and surgical planning.

Authors:  Corinne R Henak; Andrew E Anderson; Jeffrey A Weiss
Journal:  J Biomech Eng       Date:  2013-02       Impact factor: 2.097

2.  Differences in time-dependent mechanical properties between extruded and molded hydrogels.

Authors:  N Ersumo; C E Witherel; K L Spiller
Journal:  Biofabrication       Date:  2016-08-22       Impact factor: 9.954

3.  T1ρ Dispersion in Articular Cartilage: Relationship to Material Properties and Macromolecular Content.

Authors:  Kathryn E Keenan; Thor F Besier; John M Pauly; R Lane Smith; Scott L Delp; Gary S Beaupre; Garry E Gold
Journal:  Cartilage       Date:  2015-04       Impact factor: 4.634

4.  In Silico Pelvis and Sacroiliac Joint Motion: Refining a Model of the Human Osteoligamentous Pelvis for Assessing Physiological Load Deformation Using an Inverted Validation Approach.

Authors:  Maziar Ramezani; Stefan Klima; Paul Le Clerc de la Herverie; Jean Campo; Jean-Baptiste Le Joncour; Corentin Rouquette; Mario Scholze; Niels Hammer
Journal:  Biomed Res Int       Date:  2019-01-09       Impact factor: 3.411

5.  An optomechanogram for assessment of the structural and mechanical properties of tissues.

Authors:  W Lee; A Ostadi Moghaddam; S Shen; H Phillips; B L McFarlin; A J Wagoner Johnson; K C Toussaint
Journal:  Sci Rep       Date:  2021-01-11       Impact factor: 4.379

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.