Literature DB >> 22955005

Light transmission characteristics of dentine and resin composites with different thickness.

Masatoshi Nakajima1, Ayako Arimoto, Taweesak Prasansuttiporn, Ornnicha Thanatvarakorn, Richard M Foxton, Junji Tagami.   

Abstract

OBJECTIVE: The purpose of this study was to evaluate the light transmission characteristics of dentine and resin composites with different thickness.
METHODS: Disks of bovine dentine and three resin composites (Estelite Σ, Beautifil II and Clearfil Majesty) of OA2 shade were prepared with various thicknesses (0.5, 1.0 and 2.0mm). Using a goniophotometer, the distribution graphs of the light transmission intensity of each specimen were obtained, and diffusion factor (DF) as an indicator for a diffuse transmission property and peak-gain (G0) for a straight-line transmission property were calculated. Their colors were measured on black and white backings using a reflection spectrophotometer to calculate translucency parameter (TP). The data of each value (G0, DF and TP) were analyzed by two-way ANOVA and Dunnett's T3 for post hoc test (p=0.05). Regression analyses were used to determine the correlation between G0, DF, TP values and the thickness.
RESULTS: Regardless of the thickness, dentine had lower TP values than the resin composites. 0.5 mm-thick specimens of dentine and resin composite produced various G0 and DF values, with dentine exhibiting significantly lower G0 and higher DF than the resin composites (p<0.05), whereas with the 1.0 and 2.0mm-thick specimens, they were closely aligned. For dentine, G0 and DF increased in inverse proportion to the thickness (G0: R(2)=0.962, p<0.001; DF: R(2)=0.891, p<0.001).
CONCLUSIONS: Dentine had different light transmission characteristics from resin composite, depending on the thickness. CLINICAL SIGNIFICANCE: Dentine has different light transmission characteristics (straight-line and diffusion) from resin composite, depending on thickness. Resin composite restoration might be different to accurately reproduce light transmission characteristics of dentine substrate.
Copyright © 2012 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22955005     DOI: 10.1016/j.jdent.2012.08.016

Source DB:  PubMed          Journal:  J Dent        ISSN: 0300-5712            Impact factor:   4.379


  10 in total

1.  Influence of material surface on the scanning error of a powder-free 3D measuring system.

Authors:  Michael Kurz; Thomas Attin; Albert Mehl
Journal:  Clin Oral Investig       Date:  2015-03-07       Impact factor: 3.573

2.  Transmission of light in the visible spectrum (400-700 nm) and blue spectrum (360-540 nm) through CAD/CAM polymers.

Authors:  Jan-Frederik Güth; Ana Elisa Colle Kauling; Kazuhiko Ueda; Beuer Florian; Michael Stimmelmayr
Journal:  Clin Oral Investig       Date:  2016-02-26       Impact factor: 3.573

3.  Optical changes of human dentin after non-vital bleaching and effect of Er,Cr:YSGG laser on micro-shear bond strength of a self-etch and an etch-and-rinse adhesive system.

Authors:  İzgen Karakaya; Tağmaç Özberk
Journal:  Lasers Med Sci       Date:  2020-06-23       Impact factor: 3.161

4.  Scattering properties of a composite resin: Influence on color perception.

Authors:  Riccardo Beltrami; Marco Colombo; Marco Chiesa; Stefano Bianchi; Claudio Poggio
Journal:  Contemp Clin Dent       Date:  2014-10

5.  Effect of Accelerated Artificial Aging on Translucency of Methacrylate and Silorane-Based Composite Resins.

Authors:  Mehdi Shirinzad; Loghman Rezaei-Soufi; Maryam Sadat Mirtorabi; Farshid Vahdatinia
Journal:  J Dent (Tehran)       Date:  2016-03

6.  Effect of 2 Bleaching Agents with a Content of High Concentrated Hydrogen Peroxide on Stained 2 CAD/CAM Blocks and a Nanohybrid Composite Resin: An AFM Evaluation.

Authors:  İzgen Karakaya; Esra Cengiz
Journal:  Biomed Res Int       Date:  2017-07-18       Impact factor: 3.411

7.  Comparative color and surface parameters of current esthetic restorative CAD/CAM materials.

Authors:  Ferhan Egilmez; Gulfem Ergun; Isil Cekic-Nagas; Pekka Kalevi Vallittu; Lippo Veli Juhana Lassila
Journal:  J Adv Prosthodont       Date:  2018-02-12       Impact factor: 1.904

8.  Effect of zirconium oxide nanoparticles addition on the optical and tensile properties of polymethyl methacrylate denture base material.

Authors:  Mohammed M Gad; Reem Abualsaud; Ahmed Rahoma; Ahmad M Al-Thobity; Khalid S Al-Abidi; Sultan Akhtar
Journal:  Int J Nanomedicine       Date:  2018-01-09

9.  Color compatibility between dental structures and three different types of ceramic systems.

Authors:  Ioana-Sofia Pop-Ciutrila; Razvan Ghinea; Horatiu A Colosi; Javier Ruiz-López; Maria M Perez; Rade D Paravina; Diana Dudea
Journal:  BMC Oral Health       Date:  2021-02-17       Impact factor: 2.757

10.  Effect of Low Nanodiamond Concentrations and Polymerization Techniques on Physical Properties and Antifungal Activities of Denture Base Resin.

Authors:  Shaimaa M Fouda; Mohammed M Gad; Passent Ellakany; Maram A Al Ghamdi; Soban Q Khan; Sultan Akhtar; Doaa M Al Eraky; Fahad A Al-Harbi
Journal:  Polymers (Basel)       Date:  2021-12-10       Impact factor: 4.329

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.